• 해양환경안전학회지
• /
• 제16권4호
• /
• pp.401-406
• /
• 2010

해상에서의 선박운항자는 선박을 운항 중 장애물 혹은 타선에 대하여 적정한 이격거리를 두고 항행하고 있다. 다시 말해 시정 상태, 풍속, 조류 등에 따라 선박 전 후 거리, 좌 우현 정횡거리를 주관적인 안전 의식에 근거하여 이격하여 통항하고 있다. 현재 우리나라에서는 통항 선박 간 최소 안전이격거리 개념을 1980년대 초 외국에서 조사된 자료로 사용하고 있고, 항계 내(제한수로)와 항계 밖의 통항 선박의 안전거리가 상이함에도 불구하고 구분 없이 사용되고 있다. 또한 선박 조종학적 안전거리는 선박 전후 거리보다는 선박 측면거리가 중심이며, 선박 종류에 따라 최소 안전이격거리가 상이하지만 고려되고 있지 않은 실정이다. 따라서 이 논문에서는 상황에 따른 선박운항자의 안전 의식을 고려한 적정 이격거리를 정량화하여 해상교통안전성 평가모델의 충돌 판정 영역 개발을 위한 기초 자료로 활용하고자 하고, 우리나라에 적합한 해상교통 혼잡도 모델 개발 및 상황 선박별 해상교통관제에 필요한 가이드라인으로 이용할 수 있는 기초자료를 제공하는 데 목적이 있다. 연구결과, 시정이 양호한 주간의 경우 선수전방 4.4 L, 선미후방 3.1 L, 정횡 2.6L로 기존에 사용되고 있는 최소 안전이격거리와는 차이가 있는 것으로 분석되었으며 시정 및 주야간 등과 같은 파라미터를 다양하게 고려하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.318-318
• /
• 2009

The door stiffness is one of the important factors side impact. Generally, the researches have been conducted on the assembled door module. This study is to analysis the side impact characteristics for automotives door module. The impact characteristics have been determined by door module side impact test machine. To determine the initial, intermediate and peak crush resistances use the plot of load versus displacement and obtain the integral of the applied load with respect to the crush distances specified below for each door tested. The initial crush resistance is the average force required to deform the door through the initial 6 inches of crush. The intermediate crush resistance is the average force required to deform the door through the initial 12 inches of crush. The peak crush resistance will be directly obtained from the plot of load versus displacement since it is the largest force required to deform the door through the entire 18 inches crush distance. The data are used to determine if a specific vehicle or item of automotives equipment meets the minimum performance requirements of the subject Federal Motor Vehicle Safety Standard(FMVSS). FMVSS Static 214, Side impact protection, specifies performance requirements for protection of occupants in side impact crashes.

• 대한조선학회논문집
• /
• 제54권3호
• /
• pp.187-195
• /
• 2017

The operation planning of transports used to move blocks is the one of key factors. Furthermore, reducing the running time through the effective plan contributes to pulling forward the whole logistic process of the shipyard and substantially saving the fuel consumption of itself as well. The past researches of the transporter focused on finding only the shortest distances, so called, Manhattan distance. However, these searching approaches cannot help having the significant difference in the real operational time and distance with the minimum cost approach which considers the speed retardation for turns or safety at the intersection. This study suggests the noble transporter's operational model which could take account of the consuming operational time around the crossroads on the shipyard. Concretely, the proposed method guarantees the minimization of transporters' turns and passage number which are huge burdensome to the operation time and the whole planning of transports with the given period. Resultantly, this paper is willing to explain the appropriateness of our approach, compared with the previous ones.

• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.124-129
• /
• 2018

A forklift is used to lift materials above a height of 2 m. The width of the fork determines the weight of the material it can carry. In this paper, three models of fractured forklifts were analyzed to determine if the fracture was caused by load fatigue due to the width of the fork. The position of the fork was fixed on each model, and a 2.5 ton load was placed at the upper part of the fork. The width distances on each of three models were 500 mm, 750 mm and 1000 mm, and the maximum equivalent stresses were 237.5MPa, 227.62MPa and 230.99MPa, respectively. This analysis demonstrated that as the load increased with use of the wider fork, the fatigue life remained to be nearly equivalent irrespective of fork width among all three models. The results of this study contribute to the durability and safety design of forklifts.

• Nuclear Engineering and Technology
• /
• 제33권3호
• /
• pp.283-297
• /
• 2001

The CHF in PWR rod bundles is usually predicted by the local flow correlation approach based on subchannel analysis while difficulty exists due to the existence of spacer grids especially with mixing vanes. In order to evaluate the effect of spacer grids on CHF, the experimental rod bundle data with various types of spacer grids were analyzed using the subchannel code, COBRA-IV-i. For the Plain grid data, a CHF correlation was described as a function of local flow conditions and heated length, and then the residuals of the CHF in mixing vaned grids predicted by the correlation were examined in various kinds of grids. In order to compensate for the residual, three parameters, distances between grids and from the last grids to the CHF site, and equivalent hydraulic diameter were introduced into a grid parameter function representing the remaining effect of spacer grids predicted most of the CHF data points in plaing grids within $\pm$20 percent error band. Good agreement with the CHF data was also shown when the grid parameter function for mixing vaned grids of a specific design was used to compensate for the residuals of the CHF data predicted by the correlation.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.376-380
• /
• 2015

본 논문은 안개 낀 날 차선을 인식하는 방법을 제안한다. 이것은 주행 중 안개구간이 나타나면 시야확보가 어려운 운전자의 안전을 도모하고 또한 자동차 자율 주행을 가능하게 하기 위한 것이다. 제안한 방법은 먼저 입력 영상에서 화소 수 분포와 시작점으로 안개 구간인지를 판단한다. 만약 안개구간이면 Retinex 알고리즘에서 미디언 필터를 입력영상의 범위만큼 한 후 히스토그램 평활화와 정규화를 수행한다. 실험 결과 기존 연구보다 차선 검출이 정확하고 먼 거리까지 인식할 수 있었다.

• 농촌계획
• /
• 제22권1호
• /
• pp.93-100
• /
• 2016

Land price can be affected by convenience or psychological repulsion like PIMFY (Please In My Front Yard) or NIMBY (Not In My Back Yard) for various facilities. Services related to public establishment, welfare, medical attention, and amenities in rural areas are comparatively poorer than those in urban areas. The purpose of this study is to estimate the implications of the accessibility to community facilities in rural areas for land prices using a hedonic price model. The accessibility to facilities is estimated by real road distances and the land prices are applied for four types of land usages: field, rice paddy, building lots, and village halls. Community facilities are classified from public and community services view: education, safety, culture, transport, environment, health care, and finance. The results show that the accessibility to health care and transport can positively affect land prices and the accessibility to environment (waste facilities and junkyard) and unpleasant services (funeral hall and charnel house) can negatively affect land prices. Especially, the accessibility to hospital is the most positive influential factor for all types of land usages.

• Journal of Radiation Protection and Research
• /
• 제35권4호
• /
• pp.167-171
• /
• 2010

Fixed radiation portal monitors (RPMs) deployed at border, seaport, airport and key traffic checkpoints have played an important role in preventing the illicit trafficking and transport of nuclear and radioactive materials. However, the RPM is usually large and heavy and can't easily be moved to different locations. These reasons motivate us to develop a mobile radiation detection system. The objective of this paper is to report our experience on developing the mobile radiation detection system for search and detection of nuclear and radioactive materials during road transport. Field tests to characterize the developed detection system were performed at various speeds and distances between the radioactive isotope (RI) transporting car and the measurement car. Results of measurements and detection limits of our system are described in this paper. The mobile radiation detection system developed should contribute to defending public's health and safety and the environment against nuclear and radiological terrorism by detecting nuclear or radioactive material hidden illegally in a vehicle.

• Corrosion Science and Technology
• /
• 제10권4호
• /
• pp.136-142
• /
• 2011

Al alloys have been used widely for commercial and military ships in most ocean countries since mid-1950s, and the value as light metal with high mechanical strength has been proven. As the safety and fuel efficiency of Al ships have improved, she can carry more freight, sail faster and travel longer distances. Furthermore, in the shipbuilding industry, Al alloys are applied as structural materials for ships to various areas including the deck of luxurious cruises, battleships and leisure ships. In addition, Al alloys are being spotlighted as environmental-friendly material as they can be recycled even after end of lifespan. However, Al alloys for ships must be carefully selected after considering corrosion resistance, endurance, strength, and weldability in sea water environment. Al alloys to satisfy these conditions are used widely include 5000 series Al-Mg alloy and 6000 series Al-Mg-Si alloy. Thus, this study selected and evaluated the cavitation characteristics of the 5000 series Al alloys that are used in hulls that directly contact seawater and the 6000 Al alloys that are used in the upper structures of ships. Results of cavitation test with time, weightloss and cavitation rate of 5456-H116 showed the smallest damage among 5052-O, 5456-H116 and 6061-T6.

• Geomechanics and Engineering
• /
• 제30권5호
• /
• pp.479-487
• /
• 2022

This study evaluates the performance of gravel impact compaction piers system (GICPs) in strengthening retrofitting a very loose silty sand layer with a very high liquefaction risk with a thickness of 3.5 meters in a multilayer coastal soil located in Bushehr, Iran. The liquefiable sandy soil layer was located on clay layers with moderate to very stiff relative consistency. Implementation of gravel impact compaction piers is a new generation of aggregate piers. After technical and economic evaluation of the site plan, out of 3 experimental distances of 1.8, 2 and 2.2 meters between compaction piers, the distance of 2.2 meters was selected as a winning option and the northern ring of the site was implemented with 1250 gravel impact compaction piers. Based on the results of the standard penetration test in the matrix soil around the piers showed that the amount of (N₁)₆₀ in compacted soils was in the range of 20-27 and on average 14 times the amount of (1-3) in the initial soil. Also, the relative density of the initial soil was increased from 25% to 63% after soil improvement. Also the safety factor of the improved soil is 1.5-1.7 times the minimum required according to the two risk levels in the design.