• 한국산업보건학회지
• /
• 제32권1호
• /
• pp.41-52
• /
• 2022

Objectives: This study intends to review the impact on cleaning workers and suggest directions for improvement by reviewing the legal and institutional ways in which Article 86 Nos. 7 and 16 of the Enforcement Decree of the Occupational Safety and Health Act work on the maintenance and promotion of cleaning workers' health. Methods: The following laws and systems were reviewed and considered: First, the occupational safety and health legislation obligated or required to be applied to protect the health of cleaning workers; Second, the status of control of chemicals or mixtures used at cleaning sites through the Consumer Chemicals Product and Biocide Safety Control Act; Third, Control of consumer products according to foreign material safety data sheet related laws. Results: Legal and institutional measures necessary to protect the health of cleaning workers include the legal control of harmful substances to be controlled, work environment monitoring, and special health examinations. The application of the Consumer Chemicals Product and Biocide Safety Control Act does not satisfy the legal and practical level of health maintenance and promotion required by the Occupational Safety and Health Act, and the communication of chemical information is insufficient. Overseas, there are restrictions on the use of consumer products in the workplace without material safety data sheets. Conclusions: It is necessary to improve the system to ensure the health of workers handling consumer chemical products. The remaining laws and regulations exempted from the obligation to prepare material safety data sheets should be additionally reviewed.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.129-140
• /
• 1999

This study presents test results of RC beams strengthened by steel plates, carbon fiber sheets(CFS) and aramid fiber sheets(AFS) for increasing flexural and shear resistance. The test was performed with different parameters including the type of strengthening materials, flexural-strengthening methods and shear-strengthening methods. In case of flexural test, RC beams are initially loaded to 70% of the ultimate flexural capacity and in case of shear test loaded to 60 or 80 percent of the ultimate shear capacity and subsequently reinforced with steel plates, CFS and AFS. Experimental data on strength, steel strain, deflection, and mode of failure of the reinforced beams were obtained, and comparisons between the different shear reinforced schemes and the non-strengthened control beams were made. The test results showed that damaged RC beams strengthened by steel plates, CFS and AFS have more improved the flexural and shear capacity. For the beams with external reinforcement by steel plates, aramid fiber sheets and carbon fiber sheets increases in ultimate strength of 4 to 21, 17 to 43 and 26 to 36 percent were respectively achieved. Initial load had small effect on strength after reinforcement, but an important influence on deflection. One sheet reinforced was stronger than two sheets reinforced but less deflected than two sheets reinforced.

• Safety and Health at Work
• /
• 제15권2호
• /
• pp.192-199
• /
• 2024

Background: Safety data sheets (SDSs) are hazard communication materials that accompany chemicals/hazardous products in the workplace. Many SDSs contain dense, technical text, which places considerable comprehension demands on workers, especially those with lower literacy skills. The goal of this study was to assess SDSs for readability, comprehensibility, and suitability (i.e., fit to the target audience). Methods: The Suitability Assessment of Materials (SAM) tool assessed SDSs for suitability and readability. We then amended the SAM tool to further assess SDSs for comprehensibility factors. Both the original and amended SAM tool were used to score 45 randomly selected SDSs for content, literacy demand, graphics, and layout/typography. Results: SDSs performed poorly in terms of readability, suitability, and comprehensibility. The mean readability scores were Flesch-Kincaid Grade Level (9.6), Gunning Fog index (11.0), Coleman-Liau index (13.7), and Simple Measure of Gobbledygook index (10.7), all above the recommended reading level. The original SAM graded SDSs as "not suitable" for suitability and readability. When the amended SAM was used, the mean total SAM score increased, but the SDSs were still considered "not suitable" when adding comprehensibility considerations. The amended SAM tool better identified content-related issues specific to SDSs that make it difficult for a reader to understand the material. Conclusions: In terms of readability, comprehensibility, and suitability, SDSs perform poorly in their primary role as a hazard communication tool, therefore, putting workers at risk. The amended SAM tool could be used when writing SDSs to ensure that the information is more easily understandable for all audiences.

• 한국산업보건학회지
• /
• 제22권4호
• /
• pp.276-283
• /
• 2012

Objectives: This study was conducted to survey the viewpoints on the material safety data sheets(MSDS) training for safety and health managers(SHMs) and workers. Subjects and Methods: A surveillance was made using a self-reported questionnaire for 78 SHMs and 122 workers to survey their viewpoints on the MSDS training. Survey results were analyzed using the SPSS program(Version 12.0 SPSS Inc., USA). Results: The result of the study shows that there are contrasts with the cognition of SHMs' and workers' on the education of MSDS and the program preference for education efficiency of MSDS. Workers were significantly more interested in the MSDS education than the SHMs did. Workers preferred the education program which is easily to be understood, to voluntarily participate on MSDS education, but SHMs did the quiz program. Also we found that the SHMs wanted to learn the education program via the expert(37.3%) rather than education resources(33.3%) which were served by government or relevant agency. In contrast, workers wanted the audio-visual education program, which is mainly consisted of accident cases (33.3%), rather than periodical education program(22.1%). Conclusions: This study showed that effectiveness of MSDS education was associated with the program served by company, and the education program for the voluntary participation of the workers should be made practical and attractive.

• 한국환경보건학회지
• /
• 제27권4호
• /
• pp.85-91
• /
• 2001

The regulation of Material safety data sheets(MSDS) was required for the chemicals in use in the workplace from July 1976. Under the provisions of the workplace hazardous materials information system, employers in Korea must be provided with accurate and comprehensive MSDS. To examine the reliability of MSDS for organic solvents, 63 organic solvents and MSDS were collected from the workplace of 39 companies located in Kyonggi province. Manufacture\`s MSDS were compared with the actual composition of the collected samples, and further examined the reliability by checking whether the chemicals analyzed were included in the MSDS correctly. 38 solvents were able to analyze their composition by gas chromatography-mass selective detector(GC-MSD). Among them, 28 solvents were incorrect in their composition and contents. In some case, health hazardous or carcinogenic chemicals which were not included in the MSDS were detected from samples. As a result of evaluating whether the MSDS correspond to the regulation required by Industrial Safety and Health Act (ISHA), the information in the MSDS including hazard classification, occupational exposure level, toxicity, regulatory information were incorrectly provided, and some MSDS did not disclose carcinogenic in their MSDS, and some MSDS were not written in the standard format. From this survey, continuous monitoring and promoting correct MSDS, and analyzing the components of the solvents were required to endure the reliability of MSDS for organic solvents.

• 한국산업보건학회지
• /
• 제15권1호
• /
• pp.52-60
• /
• 2005

This study was carried to assess the accuracy of material safety data sheets (MSDS) for some water-soluble metalworking fluid (MWF) with respect to mono- ethanolamine(MEA), di-ethanolamine(DEA) and tri-ethanolamine (TEA). 39 fresh and 52 used MWFs for this study were taken from the workplace. The quantification and qualification of MEA, DEA and TEA were done using ion-chromatography. Three main findings of this study were 1) EA that was not addressed in material safety & data sheets (MSDS) was found to be enough higher than 1%, 2) 33.3% of 39 fresh MWF showed ingredient and concentration of MEA, DEA and TEA in MSDS and 3) the concentrations of MEA(20.5%), DEA(41.3%) and TEA(15.4%) were much higher than those indicated in MSDS. Consequently, we concluded that the accuracy on ingredients and concentrations of MEA, DEA and TEA provided in MWF was very low. Our study recommends that the limit concentration of chemical except for carcinogen that employer has to indicate in MSDS should be lowered from 1% to 0.1% .

• 한국위험물학회지
• /
• 제6권2호
• /
• pp.23-29
• /
• 2018

The fire and explosion properties necessary for waste, safe storage, transport, process design and operation of handling flammable substances are lower explosion limits(LEL), upper explosion limits(UEL), flash point, AIT( minimum autoignition temperature or spontaneous ignition temperature), fire point etc., An accurate knowledge of the combustion properties is important in developing appropriate prevention and control measures fire and explosion protection in chemical plants. In order to know the accuracy of data in MSDSs(material safety data sheets), the flash point of phenol was measured by Setaflash, Pensky-Martens, Tag, and Cleveland testers. And the AIT of phenol was measured by ASTM 659E apparatus. The explosion limits of phenol was investigated in the reference data. The flash point of phenol by using Setaflash and Pensky-Martens closed-cup testers were experimented at $75^{\circ}C$ and $81^{\circ}C$, respectively. The flash points of phenol by Tag and Cleveland open cup testers were experimented at $82^{\circ}C$ and $89^{\circ}C$, respectively. The AIT of phenol was experimented at $589^{\circ}C$. The LEL and UEL calculated by using Setaflash lower and upper flash point value were calculated as 1.36vol% and 8.67vol%, respectively. By using the relationship between the spontaneous ignition temperature and the ignition delay time proposed, it is possible to predict the ignition delay time at different temperatures in the handling process of phenol.

• 한국산업보건학회지
• /
• 제24권1호
• /
• pp.14-37
• /
• 2014

Objectives: Since information on biological factors in the workplace are currently lacking, I wanted to create a handbook of these factors that would be viewable at a glance as a means to more effectively prevent occupationally-infected diseases. Proper information on biological hazards in the workplace allowing the appropriate recognition of the harmful factors is desperately needed. Methods and Results: In this study, I intended to create a high-utility handbook of biologically hazardous agents in the workplace. To ensure its effectiveness, information and references about biologically hazardous agents in the workplace were analyzed and classified and pathogen safety data sheets(PSDS) sourced from the Public Health Agency of Canada were included. I intended to make it accessible from the point of view of workers and their employers. A more effective classification system of occupational infectious diseases is presented, and biologically hazardous agents were classified according to occupations, industries, infectious diseases, and so on. The handbook consists of 60 major kinds of biologically infectious occupational factors that are expected to be generated in workplaces in Korea, and are focused on practical utility. The pathogen safety data sheets(PSDS) of 192 species were also included. To allow more effective management, domestic and foreign laws and regulations are presented. Conclusions: This case report presents general information on the history and contents of the handbook and PSDS, it will also be useful in workplaces if download from the homepage of OSHRI, KOSHA(oshri.kosha.or.kr/bridge?menuID=901).

• 한국산업보건학회지
• /
• 제18권1호
• /
• pp.62-71
• /
• 2008

The use of chemical products to enhance and improve life is a widespread practice worldwide. But alongside the benefits of these products, there is also the potential for adverse effects to people or the environment. As a result, a number of countries or organizations have developed laws or regulations over the years that require information to be prepared and transmitted to those using chemicals, through labels or Material Safety Data Sheets (MSDS). While these existing laws or regulations are similar in many respects, their differences are significant enough to result in different labels or MSDS for the same product in different countries. Given the reality of the extensive global trade in chemicals, and the need to develop national programs to ensure their safe use, transport, and disposal, it was recognized that a Globally harmonization system of classification and labeling of chemicals(GHS) would provide the foundation for such programs. This study offered complementary details of GHS classification criteria adopted in Korea by analyzing the differences in chemical classification system between UN and Korea Ministry of Labor. Also it is proposed that mutual agreement of information DB used is required by comparing classification results of chemicals in Korea, Japan, and EU. We offered the lists of information sources useful for chemical classification.

• 한국산업보건학회지
• /
• 제17권1호
• /
• pp.63-70
• /
• 2007

This study investigated the current management staus of chemical substance information on Material Safety Data Sheets(MSDS) and Chemical Information Cards(CIC) provided by Korea Occupational Safety & Health Agency(KOSHA) and also researched the kind and the characteristics of chemical substance information provided in other organizations. MSDS DB in Korean provided on KOSHANET(which is Kosha website) is 50,802 in total, among whom are single chemical substances with 31,870 kinds(18,932%) and are mixed chemical substances with 31,870 kinds(62.7%). The number of visiting MSDS DB on KOSHANET for the search of chemicals was 2,049,806. The number has increased each year. The CIC provided for workplaces is all 542 kinds : 14 harmful substances subject to permission, 168 harmful substances subject to management, 360 KOEL(Korean Occupational Exposure Limits) establishment substances. MSDS internationally provided by organizations producing MSDS DB was written with 16 sections, which is suitable for the writing basis of American Standards Institute(ANSI) and International Organization for Standardization(ISO) and provided chemical substance information on more than 100,000 kinds in most organizations.