• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.454-461
• /
• 2015

This study compares the results of a sled test and FEA(Finite Element Analysis) of a vehicle seatbelt system and aims to propose a method to efficiently reduce the error rate in the results of the FEA. This study evaluates the relative importance of potential causes, applying AHP(Analytic Hierarchy Process) technique in order to improve the reliability of the result of the FEA, and draw a highly reliable result of FEA, conducting a Taguchi Method and optimization for reducing the error rate in the FEA through the design of experiments.

• International Journal of Safety
• /
• v.10 no.2
• /
• pp.16-20
• /
• 2011

The computer application on embedded system is recently more increased in accordance of the development of computer technology. In this trend, the depending of SW in embedded system, especially railway signaling system, is being increased further. So the testing for the safety of railway signaling system software became more important. Hence, the safety assurance of the vital software on the railway signaling system is very important but yet, not many works have been done. In this paper, we represented the implementation results of development of performance testing tool in railway signaling system. The implemented testing item had referred to the international standards in relation to the software for railway system, such as IEC 61508 and IEC 62279.

• Journal of Aerospace System Engineering
• /
• v.6 no.3
• /
• pp.7-12
• /
• 2012

The contents of aircraft system safety assessment vary depending on factors such as the complexity of the system, how critical the system is to flight safety, what volume of experience is available on the type of system and the novelty and complexity of the technologies being used. If the system safety assessment is to substantiate that the developed products are 'safe enough' to be taken into use, then the system safety assessment should be planned and managed to provide the necessary assurance that all relevant hazards and failure conditions have been identified and that all significant combinations of hazards and failures which could cause those conditions have been considered. The assessment must assist the designer and management in making decisions. It must make clear what the critical features of each system are and upon which special manufacturing techniques, inspection, testing, crew drills and maintenance practice they are critically dependent. This paper has prepared to study on promoting the efficiency of aircraft system safety assessment and to present how to compile system safety assessment strategy.

• Journal of Korean Clinical Nursing Research
• /
• v.20 no.3
• /
• pp.303-312
• /
• 2014

Purpose: This study aimed to use the DACUM analysis technique and identify the job description among nurses of the Central Supply Department, in order to clarify their duty and task descriptions, identify the characteristics of job. Methods: Through a DACUM workshop, job descriptions, and the job duties and tasks were derived. A total of 150 nurses from the Central Supply Departments of medical Institutions over 100 beds were surveyed using drafting and a job analysis table. Individual jobs' frequency, importance and difficulty were measured using a 3-point scale, and the results were analyzed using SPSS. Results: The nurses' job in the Central Supply Department consisted of 13 duties and 64 tasks. Duties with highest importance and difficulty was 'sterilization assurance system', the second was 'employee safety management' and the duty with highest frequency was 'manage packaging before sterilization'. Conclusion: This study clarified the types of nursing jobs in the Central Supply Departments, as well as identified the job characteristics and status in the given setting. Given the sterilization assurance system for preventing hospital infection, and safety management for ensuring work environment safe were found to be important duties, it is suggested for the department to stress those important jobs for managing hospital safety.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.169-177
• /
• 2021

Recently, the use of electric and electronic control systems is increasing in the automobile industry. This increase in the electric and electronic control system greatly increases the complexity of designing a vehicle, which leads to an increase in the malfunction of the system, and a safety problem due to the malfunction is becoming an issue. Based on IEC 61508 relating to the functional safety of electrical/electronic/programmable electronics, the ISO 26262 standard specific to the automotive sector was first established in 2011, and a revision was published in 2018. Malfunctions due to system failure are covered by ISO 26262, but ISO/PAS 21448 is proposed to deal with unintended malfunctions caused by changes in the surrounding environment. ISO 26262 sets out safety-related requirements for the entire life cycle. Functional safety analysis includes FTA (Fault Tree Analysis), FMEA (Failure Mode and Effect Analysis), and HAZOP (Hazard and Operability). These analysis have limitations in dealing with failures or errors caused by complex interrelationships because it is assumed that a failure or error affecting the risk occurs by a specific component. In order to overcome this limitation, it is necessary to apply the STPA (System Theoretic Process Analysis) technique.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.108-115
• /
• 2009

Recent advances in computer technology have brought more dependence on software to train control systems. Hence, the safety assurance of the vital software running on the railway system is very critical task and yet, not many works have been done. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to evaluate software's safety, especially for the vital software running on board train controllers. In this paper, we have developed the static software testing tool for railway signaling, especially Fagan Inspection module and checklists supporting module. This static testing tool for railway signaling can be utilized at the assessment phase, and also usefully at the software development stage also. It is anticipated that it will be greatly helpful for the evaluation on the software for railway signalling system.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.63-71
• /
• 2008

This study was conducted with respect to the causal factors revealed through the investigation of the recent airlines aircraft crash accident which occurred while aircraft was on the climb-out or on the final approach. This study also highlighted the importance of flight deviation and exceedance occurrences in consideration of Flight Operational Quality Assurance Program(FOQA). Twenty airline pilots participated in the flight experiment to perform ten(10) sets of simulated approaches and landings. As a result, Twelve(12) kinds of deviation events were discovered. In this respect, The FOQA program must be fully implemented to prevent any flight safety incident under the auspices of the Korea domestic aviation community as well.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.620-624
• /
• 1997

Corrugated membranes which are used as a means of liquid- and gas-sealing for a LNG storage tank and provide one of the most reliable primary barrier are the main component of in-ground membrane types for the assurance of high safety. It absorbs large thermal and mechanical deformations caused by ultra low temperature of LNG, -162 .deg.c, the cryogenic liquid and mechanical deformations caused by was carried out on crossing corrugation by commercial F.E code, ANSYS. This paper presents some of results in stress analysis of membranes performed for the purpose to investigate the strength of existing membrane for LNG storage tank designed by IHI,MHI, KHI and KGC expect for Technigaz eariy published. Based on these analytical studies,design criteria were estabilished and SHI original membranes having a high level of safety and fitting to larger capacities were developed.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.2
• /
• pp.127-135
• /
• 2009

In today's society it is often required to state objectively conformity of products (including services) to specified requirements. Conformity assessment bodies (CABs). can objectively state such conformity. These CABs perform conformity assessment activities that include certification, inspection, testing and calibration. A system to accredit CABs conformity assessment services should provide confidence to the purchaser and regulator. Certification of management system is one of means of providing assurance that the organization has implemented a system for the management of the relevant aspects of its activities, in line its policy.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1118-1125
• /
• 2010

This paper presents the methods to acquire the Safety Certificate from Independent Safety Assessment based on the IEC standard62279 which is commonly applied to railway system for Automatic Train Control(ATC) system in accordance with Urban Maglev project. This also shows approach methods and relative activities for project life-cycle to accomplish and ensure the system requirements of ATC system, RAMS and S/W quality activities. Furthermore, the key tasks conducted with ISA are noted in detail. These kind of activities for software quality of ATC system to obtain Safety Certificate could be a CASE model to improve the quality of domestic railway system and products, and also contribute to the growth of railway business and toward the achievement of overseas' railway signaling markets.