• Journal of Wellbeing Management and Applied Psychology
• /
• v.6 no.3
• /
• pp.13-18
• /
• 2023

Purpose: The small-scale environmental impact assessment has been in operation since its implementation in August 2000, and is a system that meets the purpose of sustainable development in consideration of the environment in areas requiring conservation. However, when preparing a small environmental impact assessment report, the contents of the reduction measures are too qualitative, or reports are prepared to simply list the compliance stipulated by individual laws, and the contents of consultations prepared by consultative agencies and review agencies are not much different. In addition, the direction of consultation on development projects for similar locations of the same project type is frequently changed by reflecting the subjective judgment of the consultative officer of the Ministry of Environment (Environment Agency). Therefore, this study attempted to improve the establishment of measures to reduce the existing simple listing of qualitative contents and the inconsistent presentation of review opinions by consultative agencies and review agencies. Research design, data and methodology: The research method extracted absolute evaluation items and relative evaluation items among small environmental impact assessment items, analyzed and presented detailed items, and prepared a distribution table for each section according to the details of the relative evaluation items, and presented them as a table. Results: This study was conducted to derive uniform results with objective indicators in the preparation and consultation process of a small-scale environmental impact assessment. Conclusions: Once a quantitative evaluation is established, the consultant can objectively determine and process the environmental impact.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.2
• /
• pp.57-68
• /
• 2012

This study is to suggest the improving methods for rural community centers by analysis of 30 community centers in Samnangjin-eup, Miryang city, Gyeongnam. To fulfill this purpose, the facilities, usable condition and management system were examined. The user needs and level of satisfaction were also investigated through the interviews with 858 citizens. The average size of the centers is $96m^2$, and 73% of them are one-story buildings. Women use the community center more frequently than men in ratio of 6:4. 43.4% of interviewees visit the center 1 or 2 times a month, but on the other hand 27.4% of them use the center almost every day. Recess is surely the main purpose, and health care and community meeting are next two reasons. 67.8% and 72.4% of them are not satisfied with the inside and outside of the community center respectively. The interview results demonstrate that the most important issue is the lack of facilities. To improve the community centers in Samnangjin-eup, first of all, various kinds of indoor and outdoor facilities must be equipped. Secondly, considering the center is the core of rural community life, the qualitative improvement in accommodation is also needed as well as facility diversification. The efficiency of space utilization is another issue. A small piece of land or abandoned space must be utilized. Moreover, it is very critical that the users are mostly seniors and elders, so improvements of facilities will be executed in terms of safety and convenience. Finally, administrative and financial support should be made for the people, so as to maintain the the rural community center on their own.

• Journal of Environmental Science International
• /
• v.18 no.10
• /
• pp.1123-1134
• /
• 2009

This study was designed to evaluate qualitatively and quantitatively the pollutant compositions, which were emitted from three types of mosquito repellents(MRs)(mat-, liquid-vaporized, and coil-type) by utilizing a 50-L environmental chamber. A qualitative analysis revealed that 42 compounds were detected on the gas chromatography/mass spectrometer system, and that the detection frequency depended upon chemical types. Nine of the 42 compounds exhibited a detection frequency of 100%. Four aromatic compounds(benzene, ethyl benzene, toluene, and xylene) were detected in all test MRs. The concentration equilibriums in the environmental chamber were achieved within 180 min after sample introduction. The coil-type MR represented higher chamber concentrations as compared with the mat- or liquid-vaporized-type MR, with respect to the target compounds except for naphthalene. In particular, the chamber concentrations of ethyl benzene, associated with the use of coil-type MR, were between 0.9 and $65\;mg\;m^{-3}$ whereas those of mat- and liquid-vaporized-type MRs we~e between 0.5 and $2.0\;mg\;m^{-3}$and 0.3 and $1.4\;mg\;m^{-3}$, respectively. However, naphthalene concentrations in the chamber, where a liquid-vaporized-type MR was placed, were measured as between 17.8 and $56.3\;mg\;m^{-3}$, but not detected in the chamber, where a mat- or coil-type MR was placed. The empirical model fitted well with the time-series concentrations in the environmental chamber(in most cases, determination coefficient, $R^2$ ≿ 0.9), thereby suggesting that the model was suitable for testing emissions. In regards to the target compounds except for benzene, although they were emitted from the MRs, health risk from individual exposure to them were estimated not to be significant when comparing exposure levels with no observed adverse exposure levels or lowest observed adverse exposure levels of corresponding compounds. However, it was concluded that the use of MRs could be an important indoor source as regards benzene.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.23-28
• /
• 2017

For manufacturing industry to achieve efficient manufacturing process, improving a company's productivity and reducing cost is a required task of the current manufacturing companies. For design of efficient manufacturing process and improvement of productivity, efficient manufacturing process method is studied through removal of unnecessary elements analyzing motions and using test-bed linkage system based on virtual reality. When building process line after verifying optimization through virtual process arrangement simulation in advance, it is available to save additional cost for process modification or supplement to result in practical effects of improving a company's manufacturing competition. Reducing design period, improving equipment, making automation, realizing ergonomics, and improving process through this study, it will be available to achieve improvement of productivity, enhancement of quality, cost reduction as well as employees' satisfaction for safety and health.

• Journal of Radiation Protection and Research
• /
• v.31 no.2
• /
• pp.53-63
• /
• 2006

The increased risk of cancer with exposure to low-dose radiation was estimated through longitudinal study for radiation workers at the nuclear power plants in Korea. The radiation dose data were collected from the Radiation Safety Management System(RSMS) of the Korea Hydro & Nuclear Power Co., Ltd(KHNP). The cancer risks with radiation exposure were evaluated in terms of relative mortality ratios(RMR) and relative incidence ratios(RIR) to the unexposed employees at the nuclear power plants, and of the standardized mortality ratios(SMR) and standardized incidence ratios(SIR). There were no significant increases of canters of all sites in the exposed group either in RIR[1.08, 95% confidence interval(CI) 0.74-1.58] or in RMR[1.21, CI 0.70-2.08]. Neither SIR[0.81, CI 0.28-0.96] nor SMR[0.86, CI 0.66-1.10] significantly deviated from 1.0 for cancers of all sites. The trend analysis did not identify evident dose-response relationship due to insufficient numbers of the cases. Consequently, it is concluded that increases in cancer risks in the radiation worker group exposed to low doses at the nuclear power plants in Korea are not identified at this time.

• Journal of Internet of Things and Convergence
• /
• v.8 no.6
• /
• pp.55-63
• /
• 2022

In recent years, with the rapid development of large and medium-sized urban rail transit in China, the total operating mileage of high-speed railway and the total number of EMUs(Electric Multiple Units) are rising. The system complexity of high-speed EMU is constantly increasing, which puts forward higher requirements for the safety of equipment and the efficiency of maintenance.At present, the maintenance mode of high-speed EMU in China still adopts the post maintenance method based on planned maintenance and fault maintenance, which leads to insufficient or excessive maintenance, reduces the efficiency of equipment fault handling, and increases the maintenance cost. Based on the intelligent operation and maintenance technology of PHM(prognostics and health management). This thesis builds an integrated PHM platform of "vehicle system-communication system-ground system" by integrating multi-source heterogeneous data of different scenarios of high-speed EMU, and combines the equipment fault mechanism with artificial intelligence algorithms to build a fault prediction model for traction motors of high-speed EMU.Reliable fault prediction and accurate maintenance shall be carried out in advance to ensure safe and efficient operation of high-speed EMU.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.2
• /
• pp.163-174
• /
• 2020

Particulate matter levels are rapidly increasing daily, and this can affect human health. Therefore, air pollutant emissions from sea vessels require management. This study evaluates the status of air pollutants, focusing on air pollutant emissions from the vessels of the Korea Coast Guard (KCG), and proposes national management measures to reduce emissions. According to a report recently released (2018) by the National Institute of Environmental Research (NIER), emissions from vessels constituted 6.4 % of the total domestic emissions, including 13.1 % NO_x, 10.9 % SO_x, and 9.6 % particulate matter (PM10/PM2.5). Among the rates of pollutant emission from vessels, the emission rates of domestic and overseas cargo vessels were the highest (50.6 %); the ratio of fishing boats was 42.6 %. With respect to jurisdictional sea area, 44.1 % of the emissions are from the south sea, including the Busan and Ulsan ports, and 24.8 % of the emissions are from the west sea, including the Gwangyang and Yeosu ports. The KCG inspects boarding lines to manage emission conditions and regulate air pollutant emissions, but it takes time and effort to operate various discharge devices and measure fuel oil standards. In addition, owing to busy ship schedules, inspection documents are limited in terms of management. Therefore, to reduce the air pollutant emissions of such vessels, regulations will be strengthened to check for air pollutants, and a monitoring system based on actual field data using KCG patrol ships will be established, for each sea area, to manage the emissions of such vessels. Furthermore, there is a need for technological development and institutional support for the introduction of environmentally friendly vessels.

• Journal of Food Hygiene and Safety
• /
• v.24 no.1
• /
• pp.19-26
• /
• 2009

This study was undertaken to analyze the hygienic problems of group food services and to predict the outbreak patterns of future food-borne diseases. A delphi survey with 20 experts identified the main causes of food-borne outbreaks in group food services as improper hygienic management of raw food materials, washing of worker's hands, dividing the spaces and unsanitary retail storage. Vibrio parahaemolyticus, Escherichia coli (EPEC), non-typhoid Salmonella serotypes, Staphylococcus aureus, Escherichia coli (ETEC), norovirus, and the hepatitis A virus all have potential to cause outbreaks of food-borne disease. We analyzed the daily food use and the possibility of food-borne outbreaks in school food services for fruits, milk, fish, pork, eggs, and meat as raw food materials, and bibimbab, soybean sprouts muchim, spinach namul, cucumber sengchae, jabchae, and pork bulgogi as prepared food items. Frozen (${\leq}\;-20^{\circ}C$) and refrigerated ($0{\sim}10^{\circ}C$) processed foods are popular items in group food services. Their storage, heating, and chemical sanitization methods are potential sources of food disease outbreaks. Our results can be applied to a well-organized hygiene control system and can be used to develop menus for preventing food-borne outbreaks.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.672-678
• /
• 2015

The types of hazardous and noxious substances (HNS) being transported by sea in Korea are at about 6,000, HNS transport volume accounts for 19% of total tonnage shipped in Korea, and the increase rate of seaborne HNS trade in Korea is 2.5 times higher than the average increase rate of the world seaborne HNS trade. Reflecting this trend, HNS spill incidents have been frequently reported in Korean waters, and there are increasing social demands to develop HNS management technology for the preparedness, response, post-treatment and restoration in relation to HNS spill incidents at sea. In this study, a risk-based HNS prioritization system was developed and an HNS risk database was built with evaluation indices such as sea transport volume, physicochemical properties, toxicities, persistency, and bioaccumulation. Risk scores for human health and marine environments were calculated by multiplying scores for toxicity and exposure. The top-20 substances in the list of HNS were tabulated, and Aniline was ranked first place, but it needs to be managed not by individuals but by HNS groups with similar score levels. Limitations were identified in obtaining data of chronic toxicity and marine ecotoxicity due to lack of testing data. It is necessary to study on marine ecotoxicological test in the near future. Moreover, the priority list of HNS is expected to be utilized in the development of HNS management technology and the relevant technologies, after the expert's review process and making up for the lack of test data in the current research results.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.3-12
• /
• 2011

Purpose: With increasing medical use of radiation and radioactive isotopes, there is a need to better manage the risk of radiation exposure. This study aims to grasp and analyze the individual radiation exposure situations of radiation-related workers in a medical facility by specific job, in order to instill awareness of radiation danger and to assist in safety and radiation exposure management for such workers. Materials and Methods: From January 1, 2010 December 31, 2010, medical practitioners working in the radiation is classified as a regular personal radiation dosimetry, and subsequently one year 540 people managed investigation department to target workers, dose sectional area, working period, identify the job function-related tasks for a deep dose, respectively, the annual average radiation dose were analyzed. Frequency analysis methods include ANOVA was performed. Results: Medical radiation workers in the department an annual radiation dose of Nuclear and 4.57 mSv a was highest, dose zone-specific distribution of nuclear medicine and in the 5.01~19.05 mSv in the high dose area distribution showed departmental radiation four of the annual radiation dose of Nuclear and 7.14 mSv showed the highest radiation dose. More work an average annual radiation dose according to the job function related to the synthesis of Cyclotron to 17.47 mSv work showed the highest radiation dose, Gamma camera Cinema Room 7.24 mSv, PET/CT Cinema Room service is 7.60 mSv, 2.04 mSv in order of intervention high, were analyzed. Working period, according to domain-specific average annual dose of radiation dose from 10 to 14 in oral and maxillofacial radiology practitioners as high as 1.01~3.00 mSv average dose showed the Department of Radiology, 1-4 years, 5-9 years, respectively, 1.01 workers~8.00 mSv in the range of the most high-dose region showed the distribution, nuclear medicine, and the 1-4 years, 5-9 years 3.01~19.05 mSv, respectively, workers of the highest dose showed the distribution of the area in the range of 10 to 14 years, Workers at 15-19 3.01~15.00 mSv, respectively in the range of the high-dose region were distributed. Conclusion: These results suggest that medical radiation workers working in Nuclear Medicine radiation safety management of the majority of the current were carried out in the effectiveness, depending on job characteristics has been found that many differences. However, this requires efforts to minimize radiation exposure, and systematic training for them and for reasonable radiation exposure management system is needed.