• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.409-420
• /
• 2021

The safety and health ledger system, which gives the responsibility of safety and health management for construction site workers to the construction project owner, was introduced as part of the overall revision of the Occupational Safety and Health Act. There is a need to explain the system's effectiveness in terms of economic feasibility to solve the execution problem of the system caused by low awareness and implementation rate. In this study, the economic effect of implementing the safety and health ledger system was analyzed using cost-benefit analysis based on the data discussed at the time of the introduction of the system. Results show that creating and managing the design safety and health ledger caused additional costs in implementing the system. As a result of comparing the cost of preparation and the direct and indirect benefits caused by the reduction of industrial accidents, the benefits were evaluated higher than the costs. Thus, it is thought that the safety and health ledger system reduces construction work accidents and generates economic effects.

• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.314-323
• /
• 2022

Purpose: To study the effect of the amended Occupational Safety and Health Act on the expansion of the employer's responsibility and obligations and the evaluation of the employer on the improvement of the safety management system. Method: An academic discussion was conducted by comparing the contents of previous studies with the analysis results. A questionnaire was prepared using the measurement tools collected from previous studies, and statistical multiple regression analysis was performed with the collected data. Result: Research hypothesis It was found that the expansion of responsibility and obligations of the business owner and the reinforcement of the employer's evaluation of the ordering party had a positive (+) effect on the improvement of the safety management system. Conclusion: The expansion of the responsibility and obligations of the employer and the strengthening of the evaluation of the owner of the orderer are having a positive effect on the improvement of the construction safety management system for the prevention of construction accidents.

• Journal of the Korean Society of Safety
• /
• v.33 no.4
• /
• pp.30-37
• /
• 2018

Although the safety management plan review system according to the Construction Technology Promotion Act for securing the safety of the construction work is a fundamental system essential for the prevention of the construction industry disaster, the necessity of its improvement has been raised because it often fails to meet the original purpose. In this study, through the analysis of the effect of the safety management plan and the problems of the operation, we suggest ways to improve it in view of the construction accident reduction and conducted surveys on the construction site through the questionnaires of the client, construction company, and construction business technology manager. In order to improve the effectiveness of this system as a result of the study, it is necessary to distribute the guidelines for the preparation of the safety management plan, manuals, etc., to simplify the contents of the safety management plan, also the step-by-step approval of the safety plan can be a solution. For this, it is necessary to revise the policy through consultation with the Ministry of Land, Transport and Maritime Affairs and related experts.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.381-389
• /
• 1999

One of the objectives of any task design is to provide a safe and helpful workplace for the employees. The safety and health module may include means for confronting the design with safety and health regulations and standards as well as tools for obstacles and collisions detection (such as error models and simulators). Virtual Reality is a leading edge technology which has only very recently become available on platforms and at prices accessible to the majority of simulation engineers. The design of an automated manufacturing system is a complicated, multidisciplinary task that requires involvement of several specialists. In this paper, a design procedure that facilitates the safety and ergonomic considerations of an automated manufacturing system are described. The procedure consists of the following major steps: Data collection and analysis of the data, creation of a three-dimensional simulation model of the work environment, simulation for safety analysis and risk assessment, development of safety solutions, selection of the preferred solutions, implementation of the selected solutions, reporting, and training When improving the safety of an existing system the three-dimensional simulation model helps the designer to perceive the work from operators point of view objectively and safely without the exposure to hazards of the actual system.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.41-46
• /
• 2005

The production, processing, sale and service of food materials are not subject to attainment via a single country. In accordance with internationalization of the world, issues related to food safety have emerged as critical international concerns and they are closely associated with the health and interest of domestic consumers, producers, manufacturers, and distributors. As a third party certification standards, ISO 22000 is in progress International Organization for Standardization(ISO) and the Draft International Standard(DIS) has already been presented on December 2004. The purpose of this study is to analyze the international standards, guidelines and legislation in regard of Food Safety Management System(FSMS) including ISO 9001, Hazard Analysis Critical Control Point(HACCP) and Product Liability(PL) so as to present Korean-model Food Safety Management System requirements and system establishment model.

• Safety and Health at Work
• /
• v.1 no.1
• /
• pp.11-18
• /
• 2010

In the UK, a person or organisation that creates risk is required to manage and control that risk so that it is reduced 'So Far As Is Reasonably Practicable (SFAIRP).' How the risk is managed is to be determined by those who create the risk. They have a duty to demonstrate that they have taken action to ensure all risk is reduced SFAIRP and must have documentary evidence, for example a risk assessment or safety case, to prove that they manage the risks their activities create. The UK Health and Safety Executive (HSE) does not tell organisations how to manage the risks they create but does inspect the quality of risk identification and management. This paper gives a brief overview of where responsibility for occupational health and safety lies in the UK, and how risk should be managed through risk assessment. The focus of the paper is three recent major UK incidents, all involving fatalities, and all of which were wholly avoidable if risks had been properly assessed and managed. The paper concludes with an analysis of the common failings of risk assessments and key actions for improvement.

• Journal of Korean Society for Quality Management
• /
• v.51 no.4
• /
• pp.607-618
• /
• 2023

Purpose: In this study, we proposed a plan to establish and implement a safety and health management system by utilizing corporate resources so that manufacturing companies can effectively respond to the Serious Accident Punishment Act. Methods: We identified critical factors and response strategies necessary for manufacturing companies to respond to the Severe Accident Punishment Act effectively and surveyed employees working at the company regarding their importance and performance. Results: In this study, we presented a method of strategically constructing the response strategies (20) shown in previous studies by matching them with the company's resources (leadership, organization, budget, education, and awareness). In particular, leadership refers to the ability of managers who can prevent serious accidents by carrying out safety and health security obligations to avoid safety and health hazards or risks to employees in the business or workplace that is controlled, operated, and managed. Conclusion: Based on the manager's firm leadership, the system's purpose and direction must be accurately set and sufficiently communicated to members. In addition, for companies to identify and improve risk factors on their own, a Process approach must be established to improve execution by referring to legal standards together with field managers and supervisors.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.37-45
• /
• 2019

The characteristic of fire and explosion related to electrostatic discharge is that it is difficult to reproduce the electrostatic charge and discharge phenomenon in addition to the large human and material damage. Therefore, in order to prevent accidents and disasters related to electrostatic in fire and explosion hazard areas, it is important to manage the level of electrostatic in a safe manner from the perspective of system between industrial facilities and human bodies. Rule 325 of the Occupational Safety and Health Regulations, "Prevention of Fire / Explosion due to Electrostatic", requires the use of grounding, conductive materials, humidification and electrification in order to prevent the risk of disaster caused by static explosion and electrostatic in the production process. In order to comply with these measures, related technologies, standards and systems are needed from the viewpoint of preventive measures related to electrostatic in fire and explosion hazard areas, but in Korea, it is still insufficient. Therefore, technical, institutional and managerial measures are needed as a precautionary measure to improve the level of ESD safety in fire and explosion hazard areas and prevent electrostatic related injury. In Korea, we analyzed the current status and characteristics of electrostatic related disaster by using the statistics of industrial accident and fire statistics of the Ministry of Employment and Labor. We also analyzed the current status and characteristics of electrostatic related disasters in Japan using JNIOSH accidents and disasters investigation cases and JNIOSH fire accident data of Japan Fire Bureau. The purpose of this study is to compare and analyze the current status of electrostatic related accidents and disasters in Korea and Japan in order to improve the safety management of electrostatic in fire and explosion hazard areas. In order to prevent accidents and disasters in the industrial field, The technical, institutional, and managerial measures to manage the level of electrostatic in a safe state were derived from the system point of view.

• The Korean Journal of Health Service Management
• /
• v.11 no.4
• /
• pp.189-202
• /
• 2017

Objectives : This study aims to present a new classification system using evaluation standards to ensure the safety of transport ventilators used in Korea. Due to the rapid advancement of technology, various types of ventilators have been developed and as the range of application increases, so does demand. With quick access to information and a growing economy, the technology used in Korean hospitals is equivalent to that of other countries; however, regulatory and safety consciousness are still lagging in Korea. Methods : Based on researching overseas cases, reference data and standards for improving the current system in Korea are proposed. Results : According to the review of transport ventilator use in Korea, it was found that concerns about safety is due to the absence of a standardized classification system for evaluating the safety and effectiveness of transport ventilators. Conclusions : In order to improve the safety of patients and the quality of medical care, it is essential to establish guidelines and assessment standards guaranteeing the safety of transport ventilators in Korea. Clear definitions and classifications for devices must precede the application of such standards. In addition, effective evaluation standards should be developed in order to resolve problems and improve upon the current system through continuous validation.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.5
• /
• pp.7-16
• /
• 2007

Safety and health problem are essential element of enterprise productivity Innovation within 21th century Global struggle for existence. It is not only to protect workers but it also should prevent workers from various forms of danger. In this paper, specifically, through Case Study about safety and damage government official System course danger exclusion technique of physical distribution, I wish to present direction of continuance possibility management hereafter.