• Journal of Korean Academy of Nursing
• /
• v.25 no.2
• /
• pp.362-371
• /
• 1995

There is no national system to manage, evaluate, and analyse the information about accidents, even though it is necessary for accident prevention policies and health promotion of the general public. The existing studies are, also limited as they focus only on particular group(for example : inpatients, emergency room patients) or on particular geographic areas. Thus the results of the studies cannot be ap-plied to the general public. In order to overcome these limitations, this research focuses on data collection and analysis from accident information for the general population. By providing the analysis on types and causes af accidents, this research aims to produce the basic data necessary for accident prevention policy development. The specific aims of this research are to : 1. Analyse the actual occurrences and characteristics of accidents. 2. Suggest for the accident prevention policies and safety education. Accident report form three major newspaper printed in Korea between January 1, 1989 and December 31, 1993 were collected, and the cause, place, time, and personal injury related to the accidents were classified and then analyzed by de-scriptive statistics. The results of this research conclude : 1. The number of accidents reported by the three newspapers were 2155. 2. The highest proportion of accidents were as follows ; occurred during the June-August(31.2%), Sunday(24.8%), and 5 p.m. (7.6%) of the day. 3. The highest proportion of the accident occurred in Seoul(33. l％), Kyunggi province(14.5%), Kangwon province (7.8％), and Kyungnam prov-ince(6.7%) were next highest. 4. The main causes include car accidents(32.4%), drowning(10.9%), falls(8.8%), explosion(7.1%), and poisoning(5.8%). 5. Slightly more than half of injuries(50.5%) and about two fifths of deaths(40.3%) were caused by car accidents. Therefore, the most serious type of accidents were car accidents. 6. The number of males in accidents were almost three times higher than that of females(males 72.3%, females : 27.7%). 7. The age group from 10 to 19 years old represents the highest proportion(21%) of accidents. 8. The number of the accidents in Korea, based on the information collected from the newspapers, is estimated to be 14, 367 per year. The number of in-juries is estimated to be 88, 480 persons, and the number of deaths 29, 007 respectively. It is said that ninety percent of accidents can be prevented. Several accidents prevention policies are suggested here. 1. Safety education should be done more actively throughtout life, with special emphasis on safety education for children. 2. Safety measures for children(halmets for cycling, children car seats, seats belts, and so on) should be emphasized. 3. An injury surveillance system should be initiated. The initiation of injury reporting system in each factory and school could contribute considerably to the reduction of accidents.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.94-95
• /
• 2019

Recently, the importance of prevention has emerged for the management of construction safety accidents.. Accordingly, this study collects and quantifies various risk factors at the construction site to represent them as direct risks and to create a predictive process for prevention in advance. These risk figures can be used as comprehensive safety figures to reflect current site conditions and past accidentt cases. The prevention of industrial accidents is managed in advance through the development of applications thatt quantify and predict the risks of individuals working at construction sites. The purpose of the project is to reduce industrial accidents in the construction industry by supporting safety management of site managers and workers.

• Journal of the Korean Society of Safety
• /
• v.13 no.1
• /
• pp.119-130
• /
• 1998

The purpose of this study is to investigate the safety consciousness of the lobours working at the ship building or repairing yard at which the industrial accidents frequently happen, and to provide the basic data required for the prevention of those accidents. This study is made by analyzing the questionnaires of 208 labours working at various ship building or repairing industries at random. This questionnaire is focused on finding the basic data for prevention of industrial accidents and getting the public opinions and proposals of labours. The results obtained by this study are as follows ; The negative estimations of the labours to the safety are cultivation of safety consciousness, the safety behavior in company, the molters of arrangement and the estimation of industrial or post arrangement. The positive ones are the arrangements of the protective tools and equipments for safety, the rule of safety regulation and the order of works, and the status of health education within company.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.811-816
• /
• 2022

Even though continuous management and supervision of reinforcement of policies to safeguard accidents at workplace and work sites were implemented. Accident prevention activities such as inspection and diagnosis are urgently required to induce a preliminary investigation to identify the risk factors for each type of work, before the work task to eliminate risks at the worksites. Since safety inspections at work sites were generally conducted through visual inspections, the results of safety inspections may vary depending on the findings and proficiency of the safety officers. The results of those inspections may have loopholes to prevent potential accidents at work. Therefore, the purpose of this study was to develop a risk identification checklist that can effectively perform safety inspections to prevent accidents at work sites. This study initially analyzed the previously developed accident checklist to identify current complications and issues in safety checklists. Based on the findings of major industrial accidents over the past three years, the relationship between accident, workplace, and work type were analyzed refereeing the safety inspection standards. A risk recognition-checklist was developed to provide basic data on identifying risk factors, and inspection guidance at work sites. To prepare for potential accidents by identifying and taking countermeasures to mitigate the high risk and serious accidents at sites by the guidelines of the checklist. The developed inspection checklist has been practically used by experts at work sites to perform safety inspections, and it has been verified its suitability, and feasibility, to prevent or mitigate workplace accidents, including securing the safety and health of field workers. The role of the developed safety checklist has been considered effective at worksites.

• Journal of the Korean Society of Safety
• /
• v.2 no.1
• /
• pp.43-49
• /
• 1987

Currently, Safety accidents have been raised & more concerned despite that Government has emphasized on preventing accidents in construction area of Korea. An accident is due to several causes of it, thus this the study, as the above, will specify the methodology to establish more effective safety prevention plan, itself, compared to most studies being based on a case, specially for the projects under Far-East District, Corps of Engineers, USA. Additionally, this study will be limitted for performance method and the projects will not be classified with the same sorts as domestic ones are.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.421-431
• /
• 2023

Purpose: The purpose of this study is to analyze the safety and disaster prevention effects of the Smart Safety System used to prevent safety accidents in construction machinery and demonstrate its safety. Method: Among construction machines, the behavioral patterns of workers according to the presence or absence of a smart safety system were analyzed for excavators with high risk and frequent accidents. Result: When the smart safety system was installed in the construction machine, the safety of workers from accidents caused by constriction and collision with the construction machine was secured. Conclusion: It is judged that the smart safety system installed in construction machinery can increase the effectiveness of disaster reduction and major disaster prevention related to construction machinery.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.140-146
• /
• 2001

In construction industry, workers' accident rates are relatively high compared to those of other industries. These high accidents rates are mostly due to the characteristics of construction process. In order to effectively reduce the accident rates, it is required to develop not only immediate measures but also long-term programs of instruction, training, and education. In addition, well-analyzed information on past history is required for the prevention of accidents. By examining about 800 cases of construction accidents that happened between Jan. 1992 and Dec. 2000, this paper developed an information system that provides appropriated safety information to the construction workers. This system is expected to contribute to the workers' safety in construction industry.

• International Journal of Safety
• /
• v.11 no.2
• /
• pp.1-4
• /
• 2012

The falling accidents have increased in the structure and heavy industries. Therefore, a various falling prevention systems with safety block and lanyard have been supplied in order to prevent falling accidents and acquire the long life and cost down for the maintenance. However, there are not the reliable and domestic the falling prevention system until now. Almost systems were imported from U.S.A, Japan, U.K and Germany. The structural safety of the imported safety block is satisfied sufficiently, but it has heavy weight due to the cover with the aluminum and thickness. So, many workers are not feeling themselves. Thus, the aim of this work is to develop a commercial safety block that has a light weight and strength. And the cost efficiency of the system and safety for workers also will be improved remarkably.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.3 s.51
• /
• pp.551-562
• /
• 1995

To assess the status of safety accidents, authors reviewed and analysed the records of safety accidents of a welding material manufacturing factory at Pohang city from January 1989 to December 1993. The results are; 1. The total incidence of safety accidents was 295 spells for five years. 2. Average age of workers with accident was 35.7 years. Average duration of employment was 6.2 years and the duration of employment increased as the year increased. 3. There was no statistical significance on season, month, weekday and time by year in the incidence of safety accidents. The most frequent part of body injured was upper extremities and the most frequent type of injury was abrasion. 4. Mean admission rate of safety accidents was 12.6% and the ratio of treated spells as occupational injury was 7.8%. 5. The most frequent cause of injury was worker's mistake and the most frequent action for the prevention of further accidents was safety education. 6. The incidence rate of safety accidents on 1993 was 116.2 spells per 1,000 persons. Above results suggest that to prevent safety accidents, safety education should be done continuously, the environmental and human factors were controlled and more exact reporting system of safety accidents was needed.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.2
• /
• pp.85-90
• /
• 2023

The delivery truck is traveled around the delivery area for a long time. Truck drivers cause traffic accidents because of long hours of driving, fatigue, and speeding, etc. In this study, we will test the factors for preventing accidents of drivers. We would like to find factors that affect accidents and improve that can prevent accidents. As in the results of the study, accidents occur when traffic increases and profits increase among driver age, career, and profit factors. In addition, if the volume of traffic increases during the season, the number of accidents increases further. Therefore, in order to prevent truck accidents, a stable cargo quantity must be allocated to truck and cargo must be delivered.