• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.950-957
• /
• 2023

For safe mooring and towing between the ship and port, the equipment must be designed in accordance with the relevant international regulations. However, some small shipyards and engineering companies often do not fully comprehend the core contents. Therefore, the international regulations regarding towing and mooring equipment are reviewed and the bollard and chock are newly developed based on the Mooring Equipment Guideline 4 (MEG4) standards. A bollard is a mooring equipment used to fix a mooring rope to the hull. It has two columns and is mostly used in a figure eight pattern knots under the mooring condition. The chock, which is used to change the mooring rope direction coming into the ship from outside, is manufactured using a casting with curvature. The two mooring equipment are widely used in the stern, bow, and mid-side. Owing to the increase in the size of container vessels and LNG ships, the mooring rope load has increased and the safe working load of the mooring equipment must be revised. This study summarizes and examines the results of the allowable stress method obtained using finite element analysis modelling. To consider the mesh size effect, a reasonable criteria was suggested by referring the existing class guidance. Additionally, the safe working load was verified through nonlinear collapse analysis, and the elastic region against load increments was confirmed. Furthermore, the proposed evaluation method can be used to develop similar equipment in the near future.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.251-256
• /
• 2015

In this paper, an systematic approach is presented, in which the bridge-type traffic sign structure is body out by CSDDA PrePost Processor. There is dead load and wind load that is working on the structure which will make force and moment. Analyzied the stress distribution of the standard form and by changing the shape, compared the safety in terms of deflection and stress (with the standard form) to know the effect of each component in the bridge-type traffic sign structure. The safety of deflection and stress is evaluated by maximum distance/100) and ASIC code respectively. The standard form of bridge-type traffic sign structure is established by two pairs of pillar and two pairs of floor beam. Replaced the links which is consist of flange and screws as the torsion spring and nm our analysis program. By adjusting variable of rigidity modulus of torsion spring, moment between column and beam is controled depending on value of rigidity modulus.

• Journal of the Korean Society of Safety
• /
• v.35 no.4
• /
• pp.15-22
• /
• 2020

Scaffolding works are demolished after this structure is completed, and safety accidents often occur because they are installed differently from legal standards or frequently change during work. Therefore, in order to strengthen the safety of scaffolding, the Ministry of Land, Infrastructure and Transport required a need for design standards for temporary facilities that can systematically prevent and solve large-scale safety accidents that are repeatedly increasing during temporary construction. It has been enacted, and some contents have been revised for the past three years. However, construction site personnel do not know or know the revised matters, but often install scaffolding by the installer's experience rather than complying with relevant laws and regulations. It is the situation that the ground strength test of the foundation ground for the load applied to the floor of the column is omitted in most sites. Therefore, this study grasped the actual situation on the degree of recognition of the revised laws and regulations of the construction site and the foundation-based treatment of the floor working load of the scaffolding column, and derived problems. In addition, we intend to provide reference materials for the endurance test according to the ground conditions to small-scale small sites where it is difficult to conduct the test by carrying out the endurance test of the scaffolding ground according to the revised standards.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1113-1124
• /
• 2009

The limit equilibrium method and finite element method have been commonly used to assess the stability of anchored slope. However, the existing limit equilibrium methods do not consider the load transfer of anchor and, if the potential failure surface crosses the bonded zone of anchors, the anchor loads are not included in computing the factor of safety. In this paper, simplified bishop method, one among several methods based on the limit equilibrium is used to develope the Excel Sheet program and the working load of anchor along the failure surface is calculated by Flamant's formula, proposed by Morlier and Tenier(1982). Additionally, the finite element analysis of anchored slope considering the load transfer is performed in order to compare with the result from the limit equilibrium analysis and analyze the reinforced effect of anchor. From this study, new modelling method that limits the reinforcing range and considers the load transfer is proposed and Excel Sheet program is developed. The factor of safety for several cases between PC STABL and Excel Sheet program is also compared for verification of the program.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.223-231
• /
• 2002

Recently, work-related musculoskeletal disorders(WMSDs) have rapidly increased and have been a major issue in the field of industrial safety. Of several physical risk factors for WMSDs, which include postures, vibration, repetitive work, speed or acceleration of movements, etc., awkward postures have been known as one of the major causes of WMSDs. For reducing the potential for injury as a result of postures, cost effective quantification of the magnitude for physical exposure to poor working postures is important and needed. To do this, several postural classification schemes have been developed and used in industrial sites. It is known that perceived discomfort for joint motions and muscle strength for females were much less than those for males. However, the existing postural classification schemes were developed without considering these gender effects. This study aims to develop a new postural classification scheme for female workers, based on the perceived discomfort for joint motions. The result showed that there was significant difference between the schemes for female and male. It was also found that when compared with OWAS, RULA and REBA, postural load was quantified more precisely with the developed scheme. It is recommended that different schemes according to gender of workers involved in work be used in order to accurately evaluate postural load of work postures.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.11a
• /
• pp.9-14
• /
• 2001

This paper considers automated storage and retrieval systems with double shuttle. We develop the travel time model based on the first come first service rule. We evaluate the performance of the double shuttle system working on the four command cycle.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.3
• /
• pp.46-54
• /
• 1988

The International Association of Classification Societies(IACS) can trace its original back to the International Conference on Load Lines of 1930 and was established in 1968. Long before the formal foundation of IACS, a number of working parties existed to carry out studies of specific topics concerning technical rules of classification. The general terms of reference of the working groups of IACS are to draft unified rules and regulations between Societies, to study safety standards at the request of the International Maritime Organization(IMO) and to prepare unified interpretations of technical regulations of international conventions. As an associate member since 1975, the Korean Resister of Shipping has been actively attending the meeting of IACS working parties. In this paper, summaries of major agenda of the working parties including history of unified requirements and relevant technical tendencies are explained for the purpose of providing better understanding of the rule development.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.3
• /
• pp.50-61
• /
• 2015

This paper presents on the structural behavior of the the methyl methacrylate monomer (MMA) double wide flanged the glass fiber-reinforced polymer(GFRP) pipe composite structures for the manhole raise. The evaluation of structural performance on this composite structure was conducted by the axial load, fatigue load, and ultimate load test. The assessment indicates that the MMA double wide flanged GFRP pipe composite structures was confirmed safety, durability and reliability in result as expected. It was found that this composite structure was able to short working times to around 30-50% and construction costs to around 10-23% with compare other construction methods. Also, environmental pollution and civil complaints will be prevented because there will be no longer any noises, vibrations, dust, or construction wastes.

• Ocean Systems Engineering
• /
• v.6 no.2
• /
• pp.191-201
• /
• 2016

Stern bearing is a key component of marine propulsion plant. Its environment is diverse, working condition changeable, and condition severe, so that stern bearing load is of strong time variability, which directly affects the safety and reliability of the system and the normal navigation of ships. In this paper, three affecting factors of the stern bearing load such as hull deformation, propeller hydrodynamic vertical force and bearing wear are calculated and characterized by random theory. The uncertainty mathematical model of stern bearing load is established to research the relationships between factors and uncertainty load of stern bearing. The validity of calculation mathematical model and results is verified by examples and experiment yet. Therefore, the research on the uncertainty load of stern bearing has important theoretical significance and engineering practical value.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.05a
• /
• pp.31-36
• /
• 2002

In this paper, we developed a working adaptation evaluation system using finger force measurement which interact between material and biological system. The system consists of a finger force transducer, a signal conditioner, an A/D converter, a computer, and a software system for data processing. The finger force transducer is made by a load cell and a special mechanism. The data processing software controls the A/D converter, data monitoring, and data analysis for group classification. The developed system were tested by 4 different materials in left hand and the finger forte transducer in the other hand's thumb and index finger with 16 persons. As the results of experiments, the developed system could measure the finger force quantitatively and classify the measured values into four groups.