• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.475-480
• /
• 2010

The safety step has been developed to ensure the passengers' safety including the disabled and the weak by eliminating gap between vehicle and platform. The type of safety step is divided according to the position that the safety step is installed. The type of safety step attached platform is the rubber type that is previously attached to a platform. The installed rubber can reduces the gap between vehicle and platform by a fixed distance. If the safety step is installed on the vehicle, it is possible to respond to the various platform typed such as straight or curved form. It is also flexible to the height of riding depends on number of passenger and platform conditions and does not require crew's additional operation. We have been developed vehicle attached safety step for advanced electric multiple unit. We hope to increase the use of safety step for the disabled and the weak to expand the convenience use of railway transportation system.

• Journal of the Korean Society of Safety
• /
• v.32 no.1
• /
• pp.98-107
• /
• 2017

This study is aimed to design for qualification structure and develop the subjects for examination of the school safety manager qualifications. For the study purpose, job analysis and meetings with experts were performed for extract contents such as task range, criteria of examination, subjects of examination and examination methods, etc. The first step, duties and tasks of the school safety manager were figured out through revised job analysis data of the school safety manager developed before. On the second step, job model was established and developed job specification including importance, difficulty and frequency of each task. On the third step, task specification was developed, and Knowledge-Skill Matrix was the most important thing on examination were completed. The fourth step was the selection of examination subject using task-subject matrix and 6 subjects such as The Principles of Safety, Understanding of the School Safety Manual, Law Related on the School Safety, Introduction to Education, Understanding and Dealing with Type of the School Safety, Establishment of the School Safety Plan were derived from previous procedure. The fifth step was development of guidelines for design examination of each subject. The last step was development for skills education program.

• International Journal of Safety
• /
• v.9 no.2
• /
• pp.1-5
• /
• 2010

In order to analyze the potential rise of ground surface of grounding grid installed in buildings, the grounding simulator has been designed and fabricated as substantial and economical measures. This paper describes the study of touch and step voltages with grounding grid where earth leakage current is injected. To assess risk voltage of grounding grid, the grounding simulator and CDEGS program were used to obtain measured data and theoretical results of this study. The grounding simulator was composed of an electrolytic tank, AC power supply, a movable potentiometer, and test grounding electrodes. The potential rise was measured by grounding simulator, and the touch and step voltages were computed by CDEGS program. As a consequence, the touch voltage and step voltage above the grounding grid were very low, but were significantly increased near the edge of grounding grid.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.3
• /
• pp.55-62
• /
• 2023

Public institutions have a responsibility to ensure the safety of their employees and the public. One way to do this is to implement a systematic safety inspection system based on risk assessments and continuous improvements. This study developed a systematic safety inspection system for public institutions that are ordered construction projects. The proposed system in this study consists of a three-step process: (1) developing safety grade evaluation tables, (2) preparing and conducting safety inspections, and (3) evaluating and improving safety management grades. The first step is to develop safety grade evaluation tables by analysis and diagnosis of the construction site's work type, disaster statistics, and related laws. The second step is to conduct safety inspections using the developed evaluation tables. The third step is to determine the safety management grade based on the results of the safety inspection, and to improve risk factors found during the safety evaluation. The proposed system was implemented in highway construction projects carried out by public institutions. The results showed that the proposed system has two major effects: (1) reducing accident-related deaths and injuries, (2) improving safety management levels by continuous evaluation and improvement. The proposed system can be utilized in construction projects ordered by public institutions to improve the level of occupational safety and health.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.2
• /
• pp.85-95
• /
• 2016

Objective:The purpose of this study is to suggest the methodology for establishment of safety culture in industry. Background: There have been studies indicating positive relation between safety culture and safety performance. But the areas of those efforts have been mainly focused on elements or factors consisting of safety culture. So it is expected that studies on methodologies for developing process of the culture could contribute for the industry to understand and apply it accordingly in order to improve their practices. Method: In this study, the scope was considered just for industry, even though there are many fields of culture. As the first step, the limitations of regulatory control and efforts by industry were reviewed, and the trends of researches were presented. In the second step, the global company practices were provided with detailed activities. Results: This paper showed the limitations of present state in government strategies and industry for safety culture improvement. Also the restricted areas in researches were shown. As one of the solutions to resolve those things, such global company practices as perception to safety journey, the steps of culture development, total safety philosophy, structure and elements of safety process, standards and procedures, training, and up to keys to success were suggested. Conclusion: Through this study, the development of the structure of safety process which consists of many purposeful activities has been derived to be very important. Because it will be the seeds of safety culture expressing their thinking process and behaviors. Also it is required to approach success step by step according to the achievement of each step. Application: This study can be used to develop the methodology and safety process in industry with different viewpoints for safety culture establishment.

• Journal of Applied Reliability
• /
• v.16 no.2
• /
• pp.125-133
• /
• 2016

Purpose: The purpose of this study is to evaluate durability of platform safety step system in railway. Method: We performed finite element analysis & durability analysis of platform safety step system with VPD (Virtual Product Development) techniques and examined the durability standard & qualification life through the rig test during no failure test time in reliability qualification test. We continued to test 1 million cycles in KRS (Korea Railway Standard) for system's robust design performance. Result: FEM analysis results are 14.9MPa & 14.7MPa of pin-joint, pivot and durability analysis result is above 1 million cycles. we calculated theoretically no failure test time 855,000 cycles and through the 1 million cycles durability rig test in KRS standard we confirmed product quality. Conclusion: This platform safety step system was designed very safe in terms of a mechanical strength & durability.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.2
• /
• pp.15-24
• /
• 2008

As users increasingly recognize the importance of safety and the Product Liability comes into effect, a company should take responsibility of protecting the users who use its product. In order to produce a safe product and satisfy the needs of users, it is critical for develope opriately and understand the characteristics of the product accurately. Furthermore, a safe product can be realized by considering a safety level of the product in a whole product development process. However, in general, product development projects hardly evaluate the safety of a product in the product planning step. In addition, most of safety evaluation methods which are applied in the product planning step have a tendency to be qualitative because a detailed product design step. Therefore, this research aims at enhancing the performance of the safety evaluation process by applying quantitative methods such as 'AHP' and 'Fuzzy'. AHP can help analysts derive the weight of safety factors. Fuzzy is applied to evaluate the degree of safety of product elements in this paper. The proposed method will be able to improve the safety level of a product by using the quantitative methods in the product planning step.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.1
• /
• pp.188-195
• /
• 2015

This paper presents measurement error reduction technique of touch and step voltage of grounding system based on numerical analysis. When measuring touch and step voltage of grounding system, auxiliary current probes should be located at suitable places. However, the auxiliary probes can not be located at suitable places in such cases as there are buildings and pavements. Therefore, in this paper, we provided measurement error reduction technique of touch and step voltage of grounding system according to the positions of auxiliary probes and angle between auxiliary probes. Also, measurement error analyses of touch and step voltage of grounding system have been conducted using more than one current probe. Based on these analyses, recommended positions of auxiliary probes within allowable measurement errors were presented.

• Journal of Radiation Protection and Research
• /
• v.33 no.2
• /
• pp.77-86
• /
• 2008

This study attempted to provide reference materials for improving the behavior level in radiation safety managements by drawing a prediction model that affects the radiation safety management behavior because the radiation safety management of medical Cyclotrons, which can be used to produce radioisotopes, is an important factor that protects radiation caused diseases not only for radiological operators but average users. In addition, this study obtained follows results through the investigation applied from January 2 to January 30, 2008 for the radiation safety managers employed in 24 authorized organizations, which have already installed Cyclotrons, through applying a specific form of questionnaire in which the validity was guaranteed by reference study, site investigation, and focus discussion by related experts. The radiation safety management were configured as seven steps: Step 1 is a production preparation step, Step 2 is an RI production step, Step 3 is a synthesis step, Step 4 is a distribution step, Step 5 is a quality control step, Step 6 is a carriage container packing step, and Step 7 is a transportation step. it was recognized that the distribution step was the most exposed as 15 subjects (62.5%), the items of 'the sanction and permission related works' and 'the guarantee of installation facilities and production equipments' were the most difficult as 9 subjects (37.5%), and In the trouble steps in such exposure, the item of 'the synthesis and distribution' steps were 4 times, respectively (30.8%). In the score of the behavior level in radiation safety managements, the minimum and maximum scores were 2.42 and 4.00, respectively, and the average score was $3.46{\pm}0.47$ out of 4. Prosperity and well-being programs in the behavior and job in radiation safety managements (r=0.529) represented a significant correlation statistically. In the drawing of a prediction model based on the factors that affected the behavior in radiation safety managements, general characteristics, organization characteristics, and selfefficacy didn't show a significant path statistically in which the prosperity and well-being programs in job characteristics affected the behavior in radiation safety managements. Therefore, it is necessary to establish a strategy that improves the level of prosperity and well-being levels in job characteristics in order to increase the behavior in radiation safety managements. Thus, this study provides basic materials for the radiation safety management of Cyclotron through the full-scale investigation that is first applied in Korea.

• Journal of the Korean Society of Safety
• /
• v.32 no.2
• /
• pp.117-123
• /
• 2017

This study was intended to find methods of fire extinguishing system designs that can improve the equipment's usability. In this study, the fire suppression experiment through fire extinguishers and the data drawn through the experiment were analyzed, and then the guideline for the improvement of designs was presented. The procedure is as follows. A fire suppression experiment with the use of fire extinguishers was done by 43 average adults. The whole process of the fire suppression was videotaped, and then captured major scenes were analyzed with the use of RULA, a human engineering measurement tool. The analyzed data were divided into 4 steps, and then the guideline for design improvement was presented. The summary of the study is as follows. Step 1, Fire extinguisher distance step. To reduce overload occurring at the process of holding fire extinguishers suddenly, wheels are attached to the body of extinguishers, or pedestals are installed. Step 2, Fire extinguisher transportation step. The length of hose is extended, or fire fighting water is sprayed far, so that overload of legs occurring at the process of travel can be reduced. In addition, the weight of fire extinguisher shouldn't be over 2 kg. Step 3, Safety pin removal stage. Safety pins should be applied with button type, so that excessive posture of lower limbs and excessive twisting of wrists won't happen during safety pin removal process. Besides, safety pins should be designed for easy identification and operation. Step 4, Fire extinguishing agent spraying step. To reduce overload occurring at sudden spraying of fire fighting water, pressure should be increased gradually until high pressure. With the above study results applied to existing fire extinguisher design, it may contribute to reducing any fire damage.