• 대한안전경영과학회지
• /
• 제10권1호
• /
• pp.83-90
• /
• 2008

Development of human-system interfaces (HSI) supporting the interaction between human and automation-based systems, particularly safety-critical sociotechnial systems, entails a wide range of design and evaluation problems. To help HSI designers deal with these problems, many methodologies from traditional human-computer interaction, software engineering, and systems engineering have been applied; however, they have been proved inadequate to develop cognitively well engineered HSI. This paper takes a viewpoint that HSI development is itself a cognitive process consisting of various decision making and problem solving activities and then proposes a design requirements-driven process for developing HSI. High-level design problems and their corresponding design requirements for visual information display are explained to clarify the concept of design requirements. Lastly, conceptual design of software system to support the requirements-driven process and designers' knowledge management is described.

• 천문학회보
• /
• 제37권2호
• /
• pp.194.2-194.2
• /
• 2012

Korea Aerospace Research Institute has developed an earth observation satellite and it was launched into its orbit in 2012 by using a foreign commercial launch vehicle. The launch site authority has imposed safety requirements to the spacecraft developer to ensure the safety of the personnel and to protect launch vehicle, spacecraft and facilities from accidents associated with the satellite operation at the launch site. This paper describes the range safety activities implemented for the satellite and supporting equipments during the whole phase of their design, manufacturing/test and operation at the launch site. To ensure the integrated requirements for safety management and design, system safety program plan has been developed. And based upon the plan, spacecraft developer conducted hazard analysis to identify and establish safety requirements to reflect in designs, procedures, operations. The result of the hazard analysis has been complied into safety data packages and it was reviewed by launch site review board at the safety reviews and finally it was approved to launch.

• 한국건설관리학회논문집
• /
• 제19권6호
• /
• pp.94-102
• /
• 2018

고층건물의 적법하지 않은 소방시설로 인한 화재 증가로 안전성 확보를 위한 법규 검토의 필요성이 증가하고 있지만 국내 공동주택의 경우 소방시설 화재안전규정에 대한 적법성 검토는 잘 이루어지지 않고 있다. 구조적 특성상 화재 시 인명피해의 위험이 큰 건축물임에도 검토가 미흡한 이유는 건축법과 소방법 혼재에 따른 법규 해석 오류에 있으며 이로 인한 불필요한 소방시설의 설치 및 소방시설이 누락된 상태로 이루어지는 준공검사는 막대한 경제적, 시간적 손실을 발생시킨다. 따라서 본 연구에서는 소방시설에 대하여 혼재되어 있는 법규를 한 번에 검토할 수 있는 체크리스트를 도출하고 IPA 분석을 통해 항목별 중요도와 현수준을 확인하였다. 이를 바탕으로 실무 활용성을 고려한 매뉴얼을 개발하여 건설사의 소방 준공 리스크 저감에 기여하고자 한다.

• 한국항공운항학회지
• /
• 제25권2호
• /
• pp.12-17
• /
• 2017

Manned aircraft structural design is based on structural safety factor of 1.5, and this safety factor is equivalent to a probability of failure of between 10-2 and 10-3. The target failure probability of FARs is between 10-6 and 10-9 per flight according to aircraft type. NATO released STANAG 4703 to established the airworthiness requirements for small UAV which is less than 150kg. STANAG 4703 requires the Target Level of Safety according to MTOW. The requirements of failure probability for small UAV is between 10-4 and 10-5. In this paper, requirements of airworthiness certification for small UAV were investigated and the relationship of safety factors to the probability of structural failure is analyzed to reduce measure of safety factor and structural weight of unmanned aircraft.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.575-580
• /
• 2005

In this study, safety requirement & criteria for high-speed rail system were developed for safety verification as a national rules and regulations. Safety criteria were presented through analysis of high-speed rail development specification, survey of related regulations for safety requirements. and review of operation compatibility with domestic rail system. Finally, safety rule consist of system safety requirements and safety criteria for technical parts.

• 방사선산업학회지
• /
• 제18권2호
• /
• pp.109-115
• /
• 2024

As a global effort for eco-friendly, the ship building is making great efforts to develop ships using low-carbon, eco-friendly alternative fuels. Nuclear energy, one of several eco-friendly alternative energy sources, is evaluated as an effective alternative for future ships by minimizing carbon emissions and securing economic feasibility with low power generation cost. However, although appropriate regulatory requirements are necessary for commercialization of nuclear powered ships, there are currently no regulatory requirements for nuclear powered ships in Korea. In this study, accordingly, domestic and international regulatory requirements related to nuclear powered ships were reviewed, matters to be considered in terms of safety when developing domestic marine nuclear reactor regulatory requirements were derived, and a licensing regulatory system for nuclear powered ships was derived.This study is expected to be used as basic reference data when developing regulatory requirements for nuclear powered ships.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.290-295
• /
• 2004

In railway system, the first step of safety managements is the identification of current safety level. Among many safety indexes, risk concept is the prevailing and most effective one in many developed countries for the safety management. But many requirements such as, accident classification rule, risk levels or broadly acceptable regions, safety cost benefit analysis, VPF, equivalent fatality and failure database are needed for the application of risk concept in railway. Basic requirements for the application of risk concept on railway safety improvements are derived in this study.

• 한국철도학회논문집
• /
• 제13권3호
• /
• pp.251-256
• /
• 2010

본 연구에서는 충돌해석 프로그램의 해석 결과와 실제 시험결과에 대한 비교를 통하여 충돌해석 프로그램의 신뢰성에 대한 검증을 진행하였으며, 충돌해석 프로그램을 이용하여 도시철도차량에서 요구하는 차량 편성에 대한 충돌 해석 결과를 제시하였다.

• 산업경영시스템학회지
• /
• 제44권2호
• /
• pp.124-131
• /
• 2021

In the recent business environment, risks related to product safety problems are increasing. These are arising from various factors such as increasing product and production complexity, supply chain diversification, enhanced PL (product liability) law and strengthening regulations of the government. Accordingly, ISO (international organization for standardization) published standards of PSMS (product safety management system) for suppliers such as ISO 10377 and ISO 10393. Meanwhile, the ISO 9001 QMS (quality management system) was revised in 2015, and it has established itself as an effective tool that can consistently meet the various requirements of stakeholders and promote customer satisfaction. This study aims to suggest an integration framework of QMS and PSMS based on the recent ISO international standards. To this end, firstly, the relationship between QMS and PSMS is studied based on the quality and product safety definitions, PDCA (plan-do-check-act) cycle and risk-based thinking. Secondly, the requirements of ISO 10377 and ISO 9001 are compared and classified as the common and ISO 10377 specific requirements. Finally, integration steps of two systems are suggested and guidelines that can systemize the integrated requirements are presented in the aspect of processes and documentation. This study is expected to be used as a guideline that helps companies those have already acquired QMS certification to build an international-level product safety management system early.

• Journal of information and communication convergence engineering
• /
• 제14권3호
• /
• pp.191-199
• /
• 2016

In this study, we investigate the safety requirements and test methods of a radiofrequency stimulator. The main test items include controls of a minimum output, accommodation range, and output parameters that have been known as the safety requirements in conformity with international standards. As the test criteria for controlling the minimum output, an increase or decrease in a unit of 1 mA or 1 V or less was applied to the output amplitude regulator for both continuous and discontinuous control, and the output at the minimum setting was manipulated to not exceed 2% of the maximum setting. For controlling the output parameters, one of the representative test criteria states that the current limit of 250 mA should be equal to or less than 1,500 Hz. Consequently, when applying the radiofrequency stimulator on the human body, we need to ensure that the safety requirements conform to the international standards.