• Journal of the Korean Society of Safety
• /
• v.27 no.1
• /
• pp.117-122
• /
• 2012

In recent years, there have been a number of concerns and measures surrounding 'Traffic Safety' for children. But, actually, safety measurements of 'School Zone' lack. This research thesis was designed to quantify risk degrees of 'School Zone', in a simple way, with the development of evaluation indicators to evaluate risk degrees of 'School Zone'. This is deems to be used for a guideline necessary for devising improvements or safety measures against 'School Zone' in the future. And, this is expected to be useful for managing and controlling safety each local facility about elementary schools.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.89-100
• /
• 2014

Construction victims have increased year by year. Disaster proportion is also increasing continuously. Looking over the causes of disasters by each type of work, fall from working platform indicate the highest rate above all so that it is urgently required to set up safety measures. This study is to grasp the present status of construction accidents, to identify areal characteristics of the top 20% accidents on the basis of working platforms with the highest accident rate, to grasp the causes of accidents after their analyses, and to present methods to reduce casualties related to working platforms. As measures to reduce construction disasters, this study proposes to improve safety management and training on working platforms, to complement safety regulations, and to better performance including the development and expansion of certified products suitable for safety regulations.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.77-85
• /
• 2017

As industrialization progresses, mass production becomes a smart production system. However, industrial accidents do not decline, and during the course of industrialization, due to the logic of economic agents that have an economical and effective employment environment, they are changed to non-regular workers. The Occupational Safety and Health Act stipulates that the safety managers must be distinguished and the safety managers perform the task of conducting industrial accidents by balancing the duties and regulations specified in the Act on Special Measures for Deregulation. Safety administrators providing advice on issues needed to prevent industrial accidents and preventive measures We would like to present the problems and improvements that may arise due to safety managers' replacement due to accidents caused by industrial accidents or accidents.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.4
• /
• pp.361-375
• /
• 2021

Seoul metropolitan government of South Korea has large population and facilities, and lots of building construction have been performed in urban area. Many safety accidents with causing lives and property damages occurred at construction sites in South Korea and Seoul. Thus, Korea government and Seoul have made efforts to secure the safety of construction sites. In this study, current law and measures by central department and Seoul were analyzed to find limitations and improvement points in construction safety management. Safety inspection results for construction sites in Seoul were investigated to demonstrate the main hazard work and safety risk, and interview surveys targeting safety managing persons were performed according to safety management, inspection, and education. Based on analytical results of current status on safety management, improvement measures were proposed for safety secure on construction safety in Seoul. The proposed measures include improvement of safety management systems, alleviation of safety blind spots according to construction size, strengthening efficiency of safety management, and autonomous safety engagement by construction sites centered.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.385-390
• /
• 2005

This paper provided a counter measures against the troubles and accidents that are likely to take place in the power plant using hydrogen gas as a coolant for the cooling system of the generator. Because of the extremely wide flammability limits of hydrogen in comparison to the other flammable gases, the safety measures against the hydrogen accidents is very important to ensure the normal operation of electric-power facility. This study's purpose was a presentation of standard model of safety management of hydrogen equipments in the coal firing power plant such as following items: 1) providing the technical prevention manual of the hydrogen explosions and hydrogen fires occurring in the cooling system of power generator; 2) the selection of explosion-proof equipments in terms of the risk level of operating environment; 3) the establishment of regulations and counter measures, such as the incorporation of gas leakage alarm device, for preventing the accidents from arising; 4) the establishment of safety management system to ensure the normal operation of the power plant.

• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.92-97
• /
• 2010

Fire simulation by using a computational fluid dynamics model and examination of the fires at indoor shooting ranges broken out in the past were conducted, to presume causes of the fire at the indoor shooting range in Busan and suggest fire safety measures. On-site investigations and shooting tests on unburned gunpowder were also carried out. No trace of the muzzle spark and spark at the bullet trap was found in CCTV footage, and the impact of a stray bullet failed to ignite gunpowder. Cigarette was therefore presumed to be the most likely source of ignition among the potential sources. It appeared that the explosion in the shooting area was caused by violent burning of the polyurethane sound absorber and unburned gunpowder accumulated on it. The fire safety measures include prohibit of use of profile polyurethane sound absorber, removal of steel components from bullet trap, clean up and control of unburned gunpowder, etc.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.2
• /
• pp.17-28
• /
• 2023

This study aimed to verify the validity of the evaluation items and weight determination of the indoor environmental safety area, which has the most frequent accidents, among the safety certification evaluations of educational facilities by the Ministry of Education of the Republic of Korea, which has been conducted since May 2021. As a preceding study, the evaluation items of the school safety evaluation checklist being implemented in the US state of Vermont were compared, and the causes of accidents judged by teachers in the accident experiences written by 200 Korean teachers were compared with the safety certification evaluation items belonged to the Ministry of Education. In addition, research literature using the AHP analysis technique on safety risks of elementary and secondary schools in China and safety evaluation index study cases of 539 elementary school children in Indonesia were analyzed. Through these preceding studies, measures to add and adjust evaluation items were derived and the validity and importance rankings of evaluation items were calculated through AHP questionnaires to teachers and safety experts. In addition, a survey was conducted on 104 ordinary people to verify the results of expert analysis. As a result of expert AHP analysis, 'safety education and disaster response training (.396)' was the highest priority for the relative importance of the first layer, followed by 'safety measures (.387)' and 'building materials'. Safety (.216)' was found to be the highest priority. In the overall importance ranking of the 13 second-tier screening items, safety accident prevention education had the highest priority and disaster preparedness training ranked second, proving that the Ministry of Education's review weight was underestimated. In addition, slip and collision accident countermeasures, which were not in the existing Ministry of Education review items, ranked 4th, laboratory practice room safety measures ranked 6th, and sanitation, cleanliness, hazardous substance management, and cafeteria/cooking room safety measures ranked 9th, indicating a significant level of importance. Referring to the importance ranking, which is the result of this study, it is suggested that it is necessary to review the weight of each review item again.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.225-233
• /
• 2012

The research discusses interrelationship of structural and reliability importance measures which used in the probabilistic safety assessment. The most frequently used component importance measures, such as Birnbaum's Importance (BI), Risk Reduction (RR), Risk Reduction Worth (RRW), RA (Risk Achievement), Risk Achievement Worth (RAW), Fussel Vesely (FV) and Critically Importance (CI) can be derived from two structure importance measures that are developed based on the size and the number of Minimal Path Set (MPS) and Minimal Cut Set (MCS). In order to show an effectiveness of importance measures which is developed in this paper, the three representative functional structures, such as series-parallel, k out of n and bridge are used to compare with Birnbaum's Importance measure. In addition, the study presents the implementation examples of Total Productive Maintenance (TPM) metrics and alternating renewal process models with exponential distribution to calculate the availability and unavailability of component facility for improving system performances. System state structure functions in terms of component states can be converted into the system availability (unavailability) functions by substituting the component reliabilities (unavailabilities) for the component states. The applicable examples are presented in order to help the understanding of practitioners.

• Safety and Health at Work
• /
• v.7 no.4
• /
• pp.331-339
• /
• 2016

Background: Occupational risk management is known as a catalyst in generating superior returns for all stakeholders on a sustainable basis. A number of companies in Ghana implemented health and safety measures adopted from international companies to ensure the safety of their employees. However, there exist great threats to employees' safety in these companies. The purpose of this paper is to investigate the level of compliance of Occupational Health and Safety management systems and standards set by international and local legislation in power producing companies in Ghana. Methods: The methodology is conducted by administering questionnaires and in-depth interviews as measuring instruments. A random sampling technique was applied to 60 respondents; only 50 respondents returned their responses. The questionnaire was developed from a literature review and contained questions and items relevant to the initial research problem. A factor analysis was also carried out to investigate the influence of some variables on safety in general. Results: Results showed that the significant factors that influence the safety of employees at the hydroelectric power plant stations are: lack of training and supervision, non-observance of safe work procedures, lack of management commitment, and lack of periodical check on machine operations. The study pointed out the safety loopholes and therefore helped improve the health and safety measures of employees in the selected company by providing effective recommendations. Conclusion: The implementation of the proposed recommendations in this paper, would lead to the prevention of work-related injuries and illnesses of employees as well as property damage and incidents in hydroelectric power plants. The recommendations may equally be considered as benchmark for the Safety and Health Management System with international standards.

• Safety and Health at Work
• /
• v.14 no.4
• /
• pp.384-389
• /
• 2023

Background: Exposure to welding fume is associated with adverse effects on worker health. The use of various control measures can reduce levels of exposure and the resulting health effects. However, little is known about the factors that may influence workers' use of control measures in the workplace and their perceived intervention needs. This study aimed to investigate workers' and other stakeholders' views on ways to improve the use of welding fume control measures in Australian workplaces. Methods: We conducted a series of online focus group discussions and individual interviews with participants who have some occupational involvement in welding, whether as workers, employers or industry representatives, union representatives, or regulators. A semi-structured question guide was used, and all discussions and interviews were recorded and transcribed for analysis. Results: Five focus group discussions and five individual interviews were conducted with a total of 21 participants. Three major themes emerged. The first addressed the current awareness of welding fume harms and concern about exposure; the second focussed on the current use of control measures, and barriers and facilitators to their use; and the last centred around intervention needs and the contents of a potential effective intervention. Conclusion: Improving the use of control measures to prevent exposure to welding fume requires knowledge around the barriers and facilitators of control, use, and the intervention needs of stakeholders. This study has provided such knowledge, which will facilitate the design and implementation of an intervention to reduce welding fume exposure and ultimately protect the health of workers.