• Safety and Health at Work
• /
• v.3 no.3
• /
• pp.155-165
• /
• 2012

Reflecting the current international trends toward proactive risk assessment and control at work with practical procedures, participatory action-oriented approaches are gaining importance in various sectors. The roles of these approaches in promoting the safety and health at work are discussed based on their recent experiences in preventing work-related risks and improving the quality of work life, particularly in small-scale workplaces. The emphasis placed on the primary prevention at the initiative of workers and managers is commonly notable. Participatory steps, built on local good practices, can lead to many workplace improvements when the focus is on locally feasible low-cost options in multiple aspects. The design and use of locally adjusted action toolkits play a key role in facilitating these improvements in each local situation. The effectiveness of participatory approaches relying on these toolkits is demonstrated by their spread to many sectors and by various intervention studies. In the local context, networks of trainers are essential in sustaining the improvement activities. With the adequate support of networks of trainers trained in the use of these toolkits, participatory approaches will continue to be the key factor for proactive risk management in various work settings.

• Safety and Health at Work
• /
• v.1 no.1
• /
• pp.37-42
• /
• 2010

Over years it has been increasingly concerned with how upper extremity musculoskeletal disorders (UEMSDs) are attributed to psychosocial job stressors. A review study was conducted to examine associations between UEMSDs and psychosocial work factors, and to recommend what to consider for the associations. For studies in which the job demand-control-support (DCS) model or its variables were specifically employed, published papers were selected and reviewed. A number of studies have reported relationships between UEMSDs symptoms and psychosocial exposure variables. For example, the findings are: higher numbness in the upper extremity was significantly attributed to by less decision latitude at work; work demands were significantly associated with neck and shoulder symptoms while control over time was associated with neck symptoms; and the combination of high psychosocial demands and low decision latitude was a significant predictor for shoulder and neck pain in a female working population. Sources of bias, such as interaction or study design, were discussed. UEMSDs were shown to be associated with psychosocial work factors in various studies where the job DCS model was addressed. Nonetheless, this review suggests that further studies should be conducted to much more clarify the association between UEMSDs and psychosocial factors.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.4
• /
• pp.13-20
• /
• 2003

The purpose of this study is to know the status of prevention on health obstacle in industries with confined space. Total 190 respondents, 95 safety or health managers and 95 confined space workers from 95 industries with confined space are surveyed by hygienists from April 2003, to July 2003. The contents of survey include health-work program in confined space, instrument of oxygen sampling, equipment of ventilation, safety and health education, watching manager, head count, awakening of risk, air condition and emergency training. The results are as follows: 1. It is found 38% of respondents established health-work program in confined space. The percentage of respondents with instrument of oxygen sampling and equipment of ventilation, operation of safety and health education, posting of watching man and operation of head count are 42%, 35%, 75%, 46% and 56%, respectively. 2. The percentage of awakening of risk, confirm of air condition and operation of emergency training are 36%, 25% and 15%, respectively.

• Safety and Health at Work
• /
• v.3 no.1
• /
• pp.58-66
• /
• 2012

Objectives: The purpose of this study was to review clinical characteristics and working environments of sudden cardiac death (SCD) cases associated with a tire manufacturer in Korea, and review possible occupational risk factors for cardiovascular disease including nanoparticles (ultrafine particles, UFPs). Methods: We reviewed (i) the clinical course of SCD cases and (ii) occupational and non-occupational risk factors including chemicals, the physical work environment, and job characteristics. Results: Possible occupational factors were chemicals, UFPs of rubber fume, a hot environment, shift work, overworking, and noise exposure. The mean diameter of rubber fume (63-73 nm) was (larger than diesel exhaust [12 nm] and outdoor dust [50 nm]). The concentration of carbon disulfide, carbon monoxide and styrene were lower than the limit of detection. Five SCD cases were exposed to shift work and overworking. Most of the cases had several non-occupational factors such as hypertension, overweight and smoking. Conclusion: The diameter of rubber fume was larger than outdoor and the diesel exhaust, the most well known particulate having a causal relationship with cardiovascular disease. The possibility of a causal relation between UFPs of rubber fume and SCD was not supported in this study. However, it is necessary to continue studying the relationship between large sized UFPs and SCD.

• Safety and Health at Work
• /
• v.3 no.2
• /
• pp.130-139
• /
• 2012

Objectives: The purpose of this study is to evaluate the tire manufacturing work environments extensively and to identify workers' exposure to hazardous substances in various work processes. Methods: Personal air sampling was conducted to measure polycyclic aromatic hydrocarbons, carbon disulfide, 1,3-butadiene, styrene, methyl isobutyl ketone, methylcyclohexane, formaldehyde, sulfur dioxide, and rubber fume in tire manufacturing plants using the National Institute for Occupational Safety Health Manual of Analytical Methods. Noise, carbon monoxide, and heat stress exposure were evaluated using direct reading instruments. Past concentrations of rubber fume were assessed using regression analysis of total particulate data from 2003 to 2007, after identifying the correlation between the concentration of total particulate and rubber fume. Results: Workers were exposed to rubber fume that exceeded 0.6 mg/$m^3$, the maximum exposure limit of the UK, in curing and production management processes. Forty-seven percent of workers were exposed to noise levels exceeding 85 dBA. Workers in the production management process were exposed to $28.1^{\circ}C$ (wet bulb globe temperature value, WBGT value) even when the outdoor atmosphere was $2.7^{\circ}C$ (WBGT value). Exposures to other substances were below the limit of detection or under a tenth of the threshold limit values given by the American Conference of Governmental Industrial Hygienists. Conclusion: To better classify exposure groups and to improve work environments, examining closely at rubber fume components and temperature as risk indicators in tire manufacturing is recommended.

• Safety and Health at Work
• /
• v.7 no.4
• /
• pp.259-267
• /
• 2016

Work-related musculoskeletal injuries and disorders (WMSD) are a significant issue in the health care sector. Allied Health professionals (AHP) in this sector are exposed to physical and psychosocial factors associated with increased risk of developing a WMSD. Clarification of relevant hazard and risk factors for AHP is needed to improve understanding and inform WMSD risk management. A systematic analysis of the literature was undertaken to determine prevalence and risk factors for WMSD in AHP. Databases of Ovid MEDLINE, CINAHL (EBSCO), EMBASE and the Cochrane Database of Systematic Reviews were reviewed. This quality of articles was low. Outcome measures were varied, with prevalence rates of WMSD reported from 28% to 96% over a one-year time period. The lower back was the most commonly affected body part. Relevant factors identified with the development of WMSD included inexperience in the role and area of employment. Future research needs to focus on undertaking high quality prospective studies to determine the factors associated with WMSD development in AHP.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.4
• /
• pp.363-369
• /
• 2009

The total number of confined space accident cases from 1999 to 2007 in Korea were 220, causing 353 injuries and 212 casualties. Out of 220 cases, 44(20.0%) occurred in sewage treatment facilities and 40(18.2%) occurred in both manholes and containers. When the main causes of confined space accidents were classified, oxygen deficiency accounted for 69 cases(31.4%), carbon monoxide, 48(21.8%), hydrogen sulfide, 40(18.2%), and organic solvent, 32(14.5%). Improvement of occupational accident statistics is necessary in order to report accurate and precise data for confined space accidents. The structure of confined space must be considered when selecting gas to be measured.

• Safety and Health at Work
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2015

Time-loss injuries are still a major occurrence in Canada, injuring thousands of Canadian workers each year. With obesity rates on the rise across the country, as well as around the world, it is important that the possible effects of obesity in the workplace be fully understood, especially those effects linked to lost-time injuries. The aim of this paper was to evaluate predictors of workplace lost-time injuries and how they may be related to obesity or high body mass index by examining factors associated with lost-time injuries in the health care sector, a well-studied industry with the highest number of reported time loss injuries in Canada. A literature review focusing on lost-time injuries in Registered Nurses (RNs) was conducted using the keywords and terms: lost time injury, workers' compensation, occupational injury, workplace injury, injury, injuries, work, workplace, occupational, nurse, registered nurse, RN, health care, predictors, risk factors, risk, risks, cause, causes, obese, obesity, and body mass index. Data on predictors or factors associated with lost-time injuries in RNs were gathered and organized using Loisel's Work Disability Prevention Management Model and extrapolated upon using existing literature surrounding obesity in the Canadian workplace.

• Safety and Health at Work
• /
• v.7 no.2
• /
• pp.89-96
• /
• 2016

The incidence of occupational injuries and diseases associated with industrialization has declined markedly following developments in science and technology, such as engineering controls, protective equipment, safer machinery and processes, and greater adherence to regulations and labor inspections. Although the introduction of health and safety management systems has further decreased the incidence of occupational injuries and diseases, these systems are not effective unless accompanied by a positive safety culture in the workplace. The characteristics of work in the $21^{st}$ century have given rise to new issues related to workers' health, such as new types of work-related disorders, noncommunicable diseases, and inequality in the availability of occupational health services. Overcoming these new and emerging issues requires a culture of prevention at the national level. The present paper addresses: (1) how to change safety cultures in both theory and practice at the level of the workplace; and (2) the role of prevention culture at the national level.

• Safety and Health at Work
• /
• v.6 no.1
• /
• pp.75-75
• /
• 2015