• 한국압력기기공학회 논문집
• /
• 제20권1호
• /
• pp.7-15
• /
• 2024

Environmental qualification is required for safety related electrical equipment under harsh environments located in nuclear power plants according to 10 CFR 50.49 and RG 1.89. As analog technology has recently been replaced by digital technology, NRC established RG 1.209 as a regulatory guideline for environmental qualification of safety related computer-based I&C system located in mild environments, requiring evaluation for electromagnetic compatibility, smoke exposure and type test for actual service conditions such as temperature and humidity. In this paper, the trend of environmental qualification for digital equipment is analyzed by comparing the environmental qualification requirements between digital and analog equipment.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2007년도 춘계학술대회
• /
• pp.449-456
• /
• 2007

This paper presents system of physical distribution module, and classification of logistics equipments. This study also introduces equipment standards of logistics facilities, and environmental rules for distribution center. Moreover, this paper shows safety standard and marking for logistics equipments and tools.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2004년도 제5회 정기학술발표대회 논문집
• /
• pp.296-300
• /
• 2004

건축물이 노후화되면 구조안전성능, 설비 및 마감의 안전성 등이 저하된다. 기간의 경과와 사용조건에 따라 성능 및 건축물의 가치는 변하기 때문에 건축물의 효율적인 유지관리 및 건축물의 매매 시 발생할지도 모르는 분쟁으로 인한 소비자 보호 차원에서 건축물의 안전성능에 대한 정확한 평가가 필요하다. 이 연구에서는 건축물의 안전성능에 관한 기존의 연구 결과와 성능평가 모델들을 비교 분석하여 건축물의 안전성능을 객관적으로 평가할 수 있는 항록을 선정 $\cdot$제시하였다. 이 연구 결과는 건축물의 적정 설계 $\cdot$시공 유지관리를 통하여 장수명화를 유도하기 위한 수단의 하나로 이용할 수 있을 것으로 판단되며, 앞으로 진행되는 건축물의 안전성능평가를 위한 기준 및 절차 연구의 기초 자료로 활용될 수 있을 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.63-64
• /
• 2012

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.632-637
• /
• 2012

Antenna equipment is transported being assembled to moving equipment and often subjected to vibration and shock excitation during transportation. In these circumstances, structural safety of antenna equipment must be secured. Wire rope isolators are assembled between moving equipment and antenna equipment to reduce the level of vibration and shock. In this paper, a isolator that are suitable to the system is selected and dynamic characteristics analysis of driving on antenna equipment is conducted using real system and the result is compared with response analysis. Also modal test of array-antenna pack-assembly is conducted and structural safety of that is secured by reinforcing its structure.

• 한국가스학회지
• /
• 제26권4호
• /
• pp.18-26
• /
• 2022

한국 정부는 열사용기자재(산업용 보일러)의 폭발, 화재에 대한 위험과 안전한 사용 및 관리를 고려하여 에너지이용합리화법에 따라 열사용 기자재(산업용 보일러) 검사를 수행하고 있다. 이 연구는 열사용기자재(산업용 보일러)에 대한 검사 결과 데이터를 통해 안전 및 성능 취약점을 도출하는데 목적이 있다. 이 연구는 2016년 1월부터 2020년 12월까지의 열사용기자재(산업용 보일러) 불합격 검사결과인 1,249건을 조사하였다. 연구방법은 불합격률 분산 수치가 높은 보일러 타입별 불합격 사유와 검사 방법별 불합격 사유를 통계적으로 분석하는 것이다. 안전 및 성능 취약점 카테고리는 18가지로 축약되었으며, 각 카데코리별 주요 불합격 원인은 검사원들의 의견을 추가 분석하여 제안하였다. 이 연구가 열사용기자재(산업용 보일러)의 안전 및 성능 취약점을 다루는데 기초 자료가 될 것으로 기대한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.259-262
• /
• 2009

This paper in order to reduce the electric disaster damage which is caused by with electric equipment of traditional market developed the electric safety monitoring system which is suitable in traditional market. With for this did the actual condition investigation about electrical equipment of traditional market and we constructed Test-bed for testing reliability of electric safety monitoring system. Also experiment led in Test-bed and confirmed a stability. This paper following will be used with the data for the reliability security of the electric safe system operation which follows in the traditional market actual proof equipment construction which will be advanced.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.419-422
• /
• 2016

최근 레이저 기술개발로 레이저 포인터, 레이저 수평계, 거리측정기, 온도계 등 다양한 레이저 제품들이 생산되고 있다. 다만 대부분의 소비자들은 그의 위험성에 대해서 인지하지 못하고, 무심코 사용한 레이저 용품에 의해 영구적 망막손상이나, 피부손상 등을 초래하고 있다. 이에 국내외 안전관리 현황 및 국제표준 IEC 60825-1 의 안전 요구사항 분석에 대한 연구이다.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.127-135
• /
• 2013

PURPOSES : The purpose of this study is development of automatic equipment to measure the road water-reservoir which can be one of factors for road traffic safety inspection and its application to safety analysis. METHODS : The scopes of this study are the examination of the riskiness and location of road water-reservoir through literature review, development of appropriate sensor and automatic equipment to survey the road water-reservoir and evaluation of field application. RESULTS: The laser lighting and IR camera were selected to develop the equipment. It was found from the field calibration that there is a high correlation between rutting and road water-reservoir and road water-reservoir caused by rutting can be correctly calculated. About 20.2km of national highway were inspected for case study and field application. It was found from correlation of traffic incident that 2.08km of the latent length for water-reservoir which is related to 12 traffic incidents were analyzed. CONCLUSIONS : This technique can be utilized evaluation method for road condition such as road water-reservoir for conventional evaluation system such as road traffic safety assessment and safety analysis and it can be use to new evaluation system to apply various road condition and traffic condition.

• Safety and Health at Work
• /
• 제2권4호
• /
• pp.336-347
• /
• 2011

Objectives: In Korea, an average of 258 workers claim compensation for their noise-induced hearing loss (NIHL) on an annual basis. Indeed, hearing disorder ranks first in the number of diagnoses made by occupational medical check-ups. Against this backdrop, this study analyzed the impact of 19 types of noise-generating machines and equipment on the sound pressure levels in workplaces and NIHL occurrence based on a 2009 national survey on work environments. Methods: Through this analysis, a series of statistical models were built to determine posterior probabilities for each worksite with an aim to present risk ratings for noise levels at work. Results: It was found that air compressors and grinding machines came in first and second, respectively in the number of installed noise-generating machines and equipment. However, there was no direct relationship between workplace noise and NIHL among workers since noise-control equipment and protective gear had been in place. By building a logistic regression model and neural network, statistical models were set to identify the influence of the noise-generating machines and equipment on workplace noise levels and NIHL occurrence. Conclusion: This study offered NIHL prevention measures which are fit for the worksites in each risk grade.