• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2012년도 춘계학술발표회 초록집
• /
• pp.113-116
• /
• 2012

플랜트란 산업 기계, 전기 통신 기계등 여러 가지를 생산하는 공장을 의미하고 있다. 해양플랜트는 바다위에 설치된 시설이라고 볼 수 있으며 주로 원유 및 가스를 채취하여 시중에서 사용할 수 있도록 정유공정까지 거치는 대규모 설비라고 할 수 있다. 따라서 가연성 물질을 생산, 적재함으로 화재 및 폭발의 위험성이 상존하며 화재가 발생하면 인화성 물질로 인한 대규모 화재와 폭발로 인하여 인명과 재산피해의 규모 또한 가름하기가 어렵다. 본 논문에서는 해양플랜트 화재시 화재와 폭발 두 가지 위험성 중 제트화재에 저항을 가지는 기자재를 평가할 수 있는 ISO 22899-1 시험방법과 설비에 대하여 설명하고자 한다.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.61-68
• /
• 2013

In the case of the fire to the exterior of the building through openings, the openings of the adjacent building are exposed to the risk of combustion expanding and factors that affect the combustion in the radiant heat and direct flame. Recent five years, fire of the adjacent building indicated that incidence of the 5,134(2.27%) among total 225,934 cases occurred The damage scale of fire expanded was lower than in a single building but casualties(5.46%) and property(25.0%) damage were higher. Therefore, this study provides to analyze the operating status for fire protection equipment of fire-preventing area in the Seoul and to apply measures to improve fire protection equipment according to narrow the distance between the building openings studied.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.660-668
• /
• 2000

The stress of connection points between railway vehicle equipment and carbody is considered as one of the important railway safety factor under the vehicle service condition. If any material or equipment drop in to the rail during the service condition, the vehicle call be lose its control as well as run off the rail. The be]t safety evaluation method by using hand calculation is broadly used by manufacturer is introduced in this paper. Two different kinds of the bolt, such as regular bolt and the bolt aluminum extruded carbody use, are tested based on U.I.C according to equipment fixed. The effect of holder and base to bolt under tile loading condition is analyzed on this paper.

• 대한안전경영과학회지
• /
• 제23권3호
• /
• pp.89-96
• /
• 2021

This study analyzed the physical changes in 119 paramedics transporting equipment at the emergency site and performing post-cardiopulmonary resuscitation through experiments. First, the average heart rate increased by about 25 times comparing CPR was performed without physical load and with personal protective equipment after moving equipment. In the third quartile, it increased to about 27 times. Second, when CPR was performed without physical load, and CPR was performed after moving the equipment with personal protective equipment, both the body temperature was raised and the rising body temperature was measured within normal body temperature. Third, the change in respiration rate increased by 7 times on average comparing CPR was performed without physical load and CPR was performed after moving the equipment while wearing personal protective equipment. In the third quartile, it increased to about 11 times. Finally, the change in blood pressure increased by 26.6 mmHg on average comparing CPR was performed without physical load and with wearing personal protective equipment after moving the equipment, and increased by 31.2 mmHg on average in the third quartile.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1252-1252
• /
• 2022

Temporary work that utilizes temporary equipment (e.g., system scaffold and system pipe support) in construction work is one of the most vulnerable work from a safety perspective in South Korea. Typically, temporary equipment is reused at construction sites. The Korea Occupational Safety and Health Agency announced guidelines regarding the performance standards for reusable temporary equipment to prevent the accidental collapse of temporary facilities. Nevertheless, temporary facilities' collapse still occurs, which could be attributed to a degradation in the performance due to the reuse of temporary equipment. Therefore, this study investigated the performance of simple temporary structures assembled with new and reused equipment. To this end, an experimental module was designed based on previous research cases, and two experimental models were constructed, in which one was assembled using new equipment (Model A), and the other was built using reused equipment (Model B). To determine the performance of each model, a load test was conducted to measure the maximum load that each model could withstand. The experimental results revealed that the maximum load of Model B was 15% lower than that of Model A. This indicates that there is a meaningful performance difference between those two models. Based on this result, the authors decided to perform additional tests with more realistic models than previous ones. The new experimental module was designed to ensure compliance with the Korean design guidelines. In this presentation, the authors show details of the first tests and their results and plan for the additional test.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.179-187
• /
• 2020

This paper investigates the construction equipment accidents by time. Construction sites are unique with many different hazardous conditions which cause accidents. According to the Occupational Safety and Health Administration (OSHA), accidents related to construction equipment are one of the most leading causes of fatal injuries in the construction industry. While there have been many studies investigating the equipment-related accidents, few research studies provided in-depth analyses about the time that accidents frequently occurred. By using the OSHA accidents data collected between 1997 and 2012, this paper analyzed the accidents data by time, equipment type including excavator, backhoe, dozer, and crane, accident cause, and injury class. The analyses revealed that the time window with most accidents was between 13:00 and 13:59. In terms of the injury class, the time windows with the highest numbers of equipment accidents were between 13:00 and 13:59 and between 11:00 and 11:59 for fatality and hospitalization, respectively. For the accident causes, equipment operator's error was the highest number of accident causes. It is expected that findings from the analyses can be used to more strategically develop management plans and guidelines to prevent accidents related to construction equipment to practitioners.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.64-69
• /
• 2012

The concept of SIL is applied in the most of all standards relating to functional system safety. However there are problems for the people to apply SIL to their plants. as these standards don't include sufficient informations. In this regards, this paper will suggest the direction of SIL application and concept based on IEC 61508 and IEC 61511. A Safety Integrity Level(SIL) is the discrete level(one out of possible fours), corresponding to a range of the probability of an E/E/PE (Electric/Electrical/Programmable Electrical) safety-related system satisfactorily performing the specific safety functions under all the stated conditions within a stated period of time. SIL can be divided into the target SIL(or required SIL) and the result SIL. The target SIL is determined by the risk analysis at the analysis phase of safety lifecycle and the result SIL is calculated during SIL verification at the realization phase of safety lifecycle. The target SIL is determined by the risk analysis like LOPA(Layer Of Protection Analysis), Risk Graph, Risk Matrix and the result SIL is calculated by HFT(Hardware Fault Tolerance), SFF(Safe Failure Fraction) and PFDavg(average Probability of dangerous Failure on Demand). SIL is applied to various areas such as process safety, machinery(road vehicles, railway application, rotating equipment, etc), nuclear sector which functional safety is applied. The functional safety is the part of the overall safety relating to the EUC and the EUC control system that depends on the correct functioning of the E/E/PE safety-related systems and other risk reduction measures. SIL is applied only to the functional safety of SIS(Safety Instrumented System) in safety. EUC is the abbreviation of Equipment Under Control and is the equipment, machinery, apparatus or plant used for manufacturing, process, transportation, medical or other activities.

• 대한안전경영과학회지
• /
• 제13권2호
• /
• pp.211-217
• /
• 2011

The government has been operating the long-term care insurance since 2008. In June 2010, the government manual wheelchairs, electric beds, manual beds, mattresses prevent pressure ulcers, mobile tub, bath lifts, including six items were changed to rental-only item. For the successful settlement of welfare equipment rental system, The efforts to prevent inconvenience of welfare equipment user's and improvement of the system for the activation is needed. The main object of this study is to identify the factors affecting satisfaction of welfare equipment rental and seek to proposals of revitalizing equipment rental system.

• 안전기술
• /
• 제151호
• /
• pp.62-63
• /
• 2010

• 한국안전학회지
• /
• 제28권5호
• /
• pp.83-89
• /
• 2013

Occupational Safety and Health Act provides that industrial safety helmets are personal protective equipment(PPE) to protect heads against falls from a height. Relevant domestic regulations are distinguished and different from other countries' cases. This study investigated industrial safety helmet's protective purposes and characteristics related to falls and the notion of fall prevention. A comparative analysis of regulations on safety helmets and fall prevention as well as standards on safety helmet's impact test requirements is followed by a literature review. It is also suggested that the term "fall" related to safety helmets should be changed to "impact on the upper part of head" in domestic regulations and standards.