• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.43-57
• /
• 2021

The Forward Collision Warning, a representative technology of the Advanced Driver Assistance Systems, was selected as the target technology. The cognitive response time, deceleration, and impact were selected as the measures of effectiveness. And the amount of change with and without the Forward Collision Warning was measured. The experimental scenarios included a sudden stop event (1) of the vehicle in front of the driver and an event (2) in which the vehicle intervened in the next lane. All experiments were divided into day and night. As a result of the analysis, response time and the deceleration rate decreased when the forward collision warning system was installed. It was analyzed that the driver's risk situation could be detected quickly and the number of front-end collisions could be reduced as a result. Reflecting the driver's operating habits and diversifying the experimental scenarios will increase the installation effectiveness of ADAS and be used to estimate the effectiveness of other technologies.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1161-1175
• /
• 2018

An unexpected event could be easily followed by a large secondary accident due to the limitation in sight of drivers in road tunnels. Therefore, a series of automated incident detection systems have been under operation, which, however, appear in very low detection rates due to very low image qualities on CCTVs in tunnels. In order to overcome that limit, deep learning based tunnel incident detection system was developed, which already showed high detection rates in November of 2017. However, since the object detection process could deal with only still images, moving direction and speed of moving vehicles could not be identified. Furthermore it was hard to detect stopping and reverse the status of moving vehicles. Therefore, apart from the object detection, an object tracking method has been introduced and combined with the detection algorithm to track the moving vehicles. Also, stopping-reverse discrimination algorithm was proposed, thereby implementing into the combined incident detection processes. Each performance on detection of stopping, reverse driving and fire incident state were evaluated with showing 100% detection rate. But the detection for 'person' object appears relatively low success rate to 78.5%. Nevertheless, it is believed that the enlarged richness of image big-data could dramatically enhance the detection capacity of the automatic incident detection system.

• Journal of Internet Computing and Services
• /
• v.20 no.4
• /
• pp.91-102
• /
• 2019

In autonomous driving systems, the ability to classify pedestrians in images captured by cameras is very important for pedestrian safety. In the past, after extracting features of pedestrians with HOG(Histogram of Oriented Gradients) or SIFT(Scale-Invariant Feature Transform), people classified them using SVM(Support Vector Machine). However, extracting pedestrian characteristics in such a handcrafted manner has many limitations. Therefore, this paper proposes a method to classify pedestrians reliably and effectively using CNN's(Convolutional Neural Network) deep features and transfer learning. We have experimented with both the fixed feature extractor and the fine-tuning methods, which are two representative transfer learning techniques. Particularly, in the fine-tuning method, we have added a new scheme, called M-Fine(Modified Fine-tuning), which divideslayers into transferred parts and non-transferred parts in three different sizes, and adjusts weights only for layers belonging to non-transferred parts. Experiments on INRIA Person data set with five CNN models(VGGNet, DenseNet, Inception V3, Xception, and MobileNet) showed that CNN's deep features perform better than handcrafted features such as HOG and SIFT, and that the accuracy of Xception (threshold = 0.5) isthe highest at 99.61%. MobileNet, which achieved similar performance to Xception and learned 80% fewer parameters, was the best in terms of efficiency. Among the three transfer learning schemes tested above, the performance of the fine-tuning method was the best. The performance of the M-Fine method was comparable to or slightly lower than that of the fine-tuningmethod, but higher than that of the fixed feature extractor method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.121-132
• /
• 2018

Weather is an important factor affecting roadway transportation in many aspects such as traffic flow, driver 's driving patterns, and crashes. This study focuses on the relationship between weather and road surface condition and develops a model to estimate the road surface condition using machine learning. A road surface sensor was attached to the probe vehicle to collect road surface condition classified into three categories as 'dry', 'moist' and 'wet'. Road geometry information (curvature, gradient), traffic information (link speed), weather information (rainfall, humidity, temperature, wind speed) are utilized as variables to estimate the road surface condition. A variety of machine learning algorithms examined for predicting the road surface condition, and a two - stage classification model based on 'Random forest' which has the highest accuracy was constructed. 14 days of data were used to train the model and 2 days of data were used to test the accuracy of the model. As a result, a road surface state prediction model with 81.74% accuracy was constructed. The result of this study shows the possibility of estimating the road surface condition using the existing weather and traffic information without installing new equipment or sensors.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.350-362
• /
• 2019

The purpose of this study was to examine the effects of job characteristics and health on accident experience by analyzing the data of transportation workers according to age. The analysis used data from 'the fourth Korean Working Conditions Survey(KWCS)'. A total of 1,997 transport workers data were finally analyzed, and correlation analysis, crossover analysis and logistic regression analysis were performed. It was confirmed that there was no correlation between the age of the transport workers and the accident experience. In the relationship between the characteristics of transportation workers and the experience of the accident, it was found that, in the case of older workers, there was a significant effect in the order of 'at mistake someone else hurt', 'musculoskeletal problem', 'cardiovascular problem' and 'repetitive movements of hands or arms', the model explaining power was 56.9%(p <.01). In the case of non-older workers, it was found that 'depression and anxiety disorder', 'relationship between job and safety', 'at mistake someone else hurt' and 'labor union', the model explaining power was 21.8%(p <.01). Therefore, in order to promote prevent accidents of transportation workers in future, it is necessary to consider various variables such as health and job characteristics besides age.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.475-486
• /
• 2021

The purpose of this study was to propose a policy direction to improve the service of public bicycles in Seoul by identifying the physical characteristics that affect the satisfaction level in the Seoul Metropolitan Government's public bicycle use environment. To this end, a survey was conducted on users regarding their experiences using public bicycles in Seoul, and the responses of 567 people were analyzed. IPA analysis and ordinal logistic analysis were used. An analysis of the Seoul Metropolitan Government's public bicycle IPA showed that the satisfaction level was lower than that of importance in all categories. Among them, the most urgent need for improvement was the installation of bicycle roads, improved connectivity of bicycle roads, improved road management, classification of roads and bicycle roads, improved safety during night driving, and low satisfaction levels. Second, an analysis of the factors affecting the satisfaction in the public bicycle use environment showed that the model's explanatory power increased significantly from 0.062 to 0.437 after incorporating perceived variables, confirming that the perceived neighborhood environment characteristics are an important variable for determining the satisfaction level in the public bicycle use environment, among the perceived neighborhood environmental characteristics, accessibility, convenience, manageability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.268-278
• /
• 2021

Technologies that are leading the fourth industrial revolution, such as the Internet of Things (IoT), big data, artificial intelligence (AI), and cyber-physical systems (CPS) are developing and generalizing. The demand to improve productivity, economy, safety, etc., is spreading in various industrial fields by applying these technologies. Digital twins are attracting attention as an important technology trend to meet demands and is one of the top 10 tasks of the Korean version of the New Deal. In this study, papers, magazines, reports, and other literature were searched using Google. In order to investigate the contribution or role of geospatial information in the digital twin application, the definition of a digital twin, we investigated technology trends of domestic and foreign companies; the components of digital twins required in manufacturing, plants, and smart cities; and the core techniques for driving a digital twin. In addition, the contributing contents of geospatial information were summarized by searching for a sentence or word linked between geospatial-related keywords (i.e., Geospatial Information, Geospatial data, Location, Map, and Geodata and Digital Twin). As a result of the survey, Geospatial information is not only providing a role as a medium connecting objects, things, people, processes, data, and products, but also providing reliable decision-making support, linkage fusion, location information provision, and frameworks. It was found that it can contribute to maximizing the value of utilization of digital twins.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.53-65
• /
• 2021

C-ITS(Cooperative Intelligent Transport System) that pursues traffic safety and convenience uses various sensors to generate traffic information. Therefore, it is necessary to improve the sensor-related technology to increase the efficiency and reliability of the traffic information. Recently, the role of CCTV in collecting video information has become more important due to advances in AI(Artificial Intelligence) technology. In this study, we propose to identify and track dynamic objects(vehicles, people, etc.) in CCTV images, and to analyze and provide information about them in various environments. To this end, we conducted identification and tracking of dynamic objects using the Yolov4 and Deepsort algorithms, establishment of real-time multi-user support servers based on Kafka, defining transformation matrices between images and spatial coordinate systems, and map-based dynamic object visualization. In addition, a positional consistency evaluation was performed to confirm its usefulness. Through the proposed scheme, we confirmed that CCTVs can serve as important sensors to provide relevant information by analyzing road conditions in real time in terms of road infrastructure beyond a simple monitoring role.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.167-182
• /
• 2022

The accident data attributes of the traffic accident report are used not only in traditional traffic safety-related research to identify the cause of traffic accidents, but also as basis data for the development of the automated vehicle driving performance verification scenarios. However, since the data attributes of the traffic accident report are limited for the purpose of reconstructing the traffic situation and developing scenarios, this study aims to provide the directions for improvement of traffic accident report, ultimately for its expanded usability for the automated vehicle test scenarios. The directions for improvement of the traffic accident report are provided by categorizing the traffic situation before the accident (pre-crash), the situation immediately before or during the accident (on-crash), and the situation after the accident (post-crash), respectively. Additional data items or data processing methods are presented. Furthermore, data elements that can be extracted from the traffic accident process data in the unstructured narrative form are explored and provided.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.37-46
• /
• 2021

Government agencies, such as police and local governments, strive to prevent traffic hazards and create a comfortable road environment by pormoting transportation and road facilities. To this end, roads and transportation facilities are enhanced and adjusted, and improvement projects in areas with frequent traffic accidents are carried out. Usually, improvement projects in areas with frequent traffic accidents vary by projects and region. Moreover, these projects are carried out under the supervision of a person in charge and related parties. Hence, civil complaints and subjectivity are reflected in deriving priorities for the improvement projects, limiting the efficiency of the project. To this end, a study was conducted to estimate the direction of improvement of the project target site. This study comprehensively considered road, traffic, and accident conditions of representative projects with high effectiveness in handling traffic accidents. The results of the study state that the accuracy of estimating the improvement project was around 88%. In addition, the study found that there was a strong relationship between traffic volume, accident rate, and accident severity in estimating the improvement direction.