• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.295-296
• /
• 2021

With the recent diversification and complication of buildings, the functions of building are also developing. As much as the development of buildings, the machine or equipment used for them is also developing. Thus, all sorts of domestic/foreign industrial facilities and fire stations in the whole nation are using the electric shutter that could meet the insulation just like the exterior wall of general buildings, for bringing-in/storage and crime prevention/fire prevention. Currently, various types of electric shutters are used. Such wrong operation and poor management are causing many panel-falling accidents. This study researched the reduction of electric shutter panel-falling risk by reviewing the domestic/foreign laws and standards, and researching the new safety equipment. First, the causes for falling and accident types were drawn by analyzing the cases of electric shutter accidents. After that, a checklist as the measures for reducing the falling of electric shutter in building was suggested by analyzing the items for the inspection of electric shutter.

• Journal of the Korean Society of Safety
• /
• v.24 no.6
• /
• pp.72-78
• /
• 2009

Exposure to HDI(hexamethylene di-isocyanate) commonly used in vehicle crash repair workshops remains a leading cause of occupational asthma. Although skin and eye contamination are considered as absorption routes, there are no occupational exposure standards for skin and ocular exposure. This is the reason why there are more empirical data should be provided. Therefore this study was to determine contamination levels of HDI on the skin, eyes, work surfaces, respirators and eye protectors. There was evidence of contamination on a variety of work surfaces, for example, door handles, bench top and spray gun, etc. A high proportion(47~80%) of skin wipe samples from neck, forehead, back hand, palm and wrist was positive for HDI contamination, even though spray time was relatively brief. The contamination levels from spraying inside spray booth were generally higher than outside booth due to poor work practices and inappropriate personal protective use like safety gloves. Apprentices had higher exposure levels than the qualified painters, likely due to lack of the recognition of safety and hygiene. The extent of contamination inside the PPE might provide an indication of the potential for respiratory & skin exposure and ocular exposure. Eye fluid samples from 4 out of 14 workers had the positive detection of HDI contamination, due to poor work practices like no or inappropriate eye protection. Considering the potential for dermal & ocular exposure to contribute to possible health symptoms including respiratory sensitization, the empirical data point to a need for improving work practices and appropriate PPE selection, use and maintenance.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.1
• /
• pp.50-57
• /
• 2020

Objectives: Methyl bromide is a highly toxic substance that can cause systemic poisoning, neurotoxicity, pulmonary edema. Methyl bromide is a widespread fumigation agent used for import and export quarantine, but there is little data on exposure assessment of workers participating in such fumigation. Therefore, this study aims to investigate the exposure level of methyl bromide among workers and the concentration distribution of methyl bromide in the workplace during fumigation. Methods: For this study, one wood tent and one container fumigation area in Pusan, and one wood tent fumigation area in Incheon were investigated over three months from June 2001. Results: Methyl bromide exposure levels for container fumigation workers were from undetected to 1.86 ppm and from undetected to 2.28 ppm for tent fumigation workers as an 8 hr TWA. After opening the container door, the methyl bromide concentration in the container decreased rapidly over time, but the concentration remained over 1 ppm even after about one hour. The concentrations around the tent during its removal were highly affected by wind, but were detected in a range from undetected to 11.97 ppm. Conclusions: This study confirmed that both container and tent fumigation caused workers to exceed the exposure limit of 1 ppm as an 8 hour TWA. In particular, it could be confirmed that a situation exists in which the worker may be exposed to high concentrations of methyl bromide when opening the container or removing the tent due to the nature of the work. Therefore, it is very important to improve working methods and to wear appropriate personal protective equipment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.2 s.21
• /
• pp.41-47
• /
• 2004

Plate has cutout inner bottom and girder and Door etc. in hull construction absence is used much, and this is strength in case must be situated, but establish in region that high stress interacts sometimes fatally in region that there is no big problem usually by purpose of weight reduction, a person and freight movement, piping etc.. Because cutout‘s existence is positioning in this place, and, elastic bucking strength by load causes large effect in ultimate strength. Therefore, perforated plate elastic bucking strength and ultimate strength is one of important design criteria to decide structural elements size at early structure design step of a ship. Therefore, we need reasonable & reliable design formula for elastic bucking strength of the perforated plate. The author computed numerically ultimate strength change about several aspect ratios, cutout dimension, and plate thickness by using ANSYS Finite element analysis code based on finite element method in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.602-607
• /
• 2017

The development of science and technology has increased the average life expectancy and resulted in a significant increase in the elderly population. Due to the preponderance of the nuclear family in modern society and the weakening of the spirit of filial piety and respect for the elderly caused by the influence of Western civilization, elderly people are usually not living with their family, but have become dependent on elderly care facilities and, consequently, the number of elderly care facilities has increased significantly. On May 28, 2014, a fire occurred in the elderly care facilities in Jangseong, South Jeolla Province, and despite the rapid extinction of the fire by firefighters, 21 of the 28 casualties died due to smoke inhalation. This study was conducted for the purpose of providing measures to prevent smoke from entering into the rooms from which elderly people have difficulty evacuating in the case of fire. The use of the air curtain method to prevent smoke inflow was proposed and an experiment was conducted in which smoke was generated with a smoke generator. As a result of the experiment, it was confirmed that more than 90% of the smoke inflow was blocked if the door was closed in the room where the air curtain was installed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.2
• /
• pp.313-319
• /
• 2013

This study shows the results of safety analysis obtained from the three different wire rope connections in the RPSD (Rope Platform Screen Door) system, which are the rope connected at both ends, the ropes connected by a pulley at both ends, and the ropes connected by many pulleys at both ends. With a constant load applied, the displacements in the ropes connected by a pulley at both ends and the ropes connected by many pulleys at both ends are smaller than that in the rope connected at both ends. There are no any special different displacements between the ropes connected by a pulley at both ends and the ropes connected by many pulleys at both ends. The displacement in the wire rope diameter of 6mm is smallest of 4.83mm and the strains from the displacements in the ropes connected by a pulley at both ends and the ropes connected by many pulleys at both ends are very small.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.123-136
• /
• 2012

The validity of the results from observational methods such as RULA, REBA, OWAS has been one of major concerns due to their subjective characteristics in determining the posture of interests. There have been many studies regarding validity of the results from each checklist. However, most studies provided only fragmentary rather than comprehensive results in nature. This study specifically tried to analyze consistency of novice user based on intra-observer consistency and sensitivity of industrial types during MSDs(Musculoskekltal Disorders) evaluation with major checklists. In this study, twenty two novice subjects were participated to conduct MSDs evaluation for the forty five jobs from three types of industries(automobile, electronics, hospital). The main results for this study were summarized as follows; 1) The action level based on RULA was always higher than that from REBA and OWAS for all three types of industries., 2) The order of consistency from novice users was OWAS(72.7%(kappa=0.57)) RULA(54.3%(kappa=0.41)), REBA(41.0%(kappa=0.34))., 3) The percentage of agreement between 2nd and 3rd trials was higher than those between 1st and 2nd trials and between 1st and 3rd trials irrespective of industrial types during using RULA and REBA., 4) The average score of automobile industry was higher than those of hospital and electronics industries., 5) The types of jobs associated with five body parts(A1(Front), A2(Interior), A3(Rear), A4(Lower), A5(Door)) in automobile industry showed statistically significant differences in terms of MSDs scores for the body parts considered in each checklists.

• Journal of the Korean Society for Railway
• /
• v.17 no.2
• /
• pp.87-93
• /
• 2014

The KTX, running in Korea but imported from Alstom Co. in France, has folding type staircases complying with European standard EN 4752. However, when operating, the step size is only 200mm, while the Korean standard step size is 253mm, a standard reflecting the average value of persons aged 20~60. From the aspect of kinesiology, the current step size can cause falls or slips during embarking and disembarking of passengers because body load is mostly focused on the heel and the current step is much more narrow than the standard size. Thus, we have performed an analytical study to check the safety of folding type staircases on the KTX after re-design.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.447-453
• /
• 2013

Since PSDs(Platform Screen Doors) are set up at many subway stations, their design related to safety has become gradually important. In particular, the interference check with a running railway vehicle is the most important of performance indices because the collision between PSDs and vehicles can be dangerous for passengers in the car and on platforms. When the train comes into a station with a curvature, the passenger car has a large translational and rotational motion and the displacement is enough for coming in contact with PSD. The performance is affected by many design parameters such as rail design parameters and vehicle velocity. This study proposes dynamic analysis models for railway vehicles and rails. Some parameters were also considered in the models to determine their influence on the performance.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.83-90
• /
• 2011

It has been very important to have an exact evaluation for risk factors in order to prevent WMSDs(Work-related Musculoskeletal Disorders). However, most WMSDs evaluation methods have always been some problems of possibilities associated with subjective evaluation. Therefore, this study tried to conduct a sort of usability analysis on three major evaluation methods(OWAS, RULA, REBA). Specifically, major subjects in the study consisted of three parts as follows; comparison of the results between experienced and inexperienced observers, analysis for the consistency of the results in terms of different evaluation times, and analysis for the consistency of the results in terms of different job characteristics(based on the part of the automobile). The results of the study were summarized as follows; 1) There was statistically significant difference of the results by RULA and by REBA between experienced and inexperienced observers. This might be due to the fact that experienced observers have had better ability to detect the important working posture during evaluation. However, the results by OWAS did not give any significantly different results between experienced and inexperienced observers, 2) All three checklists applied by experienced subjects did not show any single result significantly different in terms of different evaluation times. This might have to do with high intra-observer reliability from some of previous studies, 3) The five parts of an automobile were selected as five major jobs with different job characteristics in the automobile industry. Specifically, they were door part, front part(hood, etc.), inside part(dash board, seats, etc.), rear part(trunk etc.), and bottom part. All three methods did not show any significant differences for the results from each observers. Further study on this subject would eventually provide a sophisticated evaluating guidelines for WMSDs regarding determination of observer-specific evaluation, identification of repetitive number of evaluations for stable results for each checklist, determination of job-specific evaluation methods, and so on.