• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.316-323
• /
• 2000

In railway train operations, a braking distance between two trains must be controlled on their speeds to avoid rear end collisions. The distance is decided by some parameters such that propulsion and braking performance of trains, gradient and etc. When determining this block distance, it is important to consider the two aspects that safety insurance at train running and increase of train running frequency. In this paper, we showed a methodologies of equiblock by consideration gradients and calculated optimal block speeds on the basis of the equivalent block distance.

• 한국안전학회지
• /
• 제27권4호
• /
• pp.33-37
• /
• 2012

This paper describes the characteristics for ground impedance of counterpoise according to position of auxiliary probe and frequency using the fall-of-potential method and the testing techniques to minimize the measuring errors are proposed. The fall-of-potential method is theoretically based on the potential and current measuring principle and the measuring error is primarily caused by the position of auxiliary probes. In order to analyze the effects of ground impedance due to the distance of the current probe and frequency, ground impedances were measured in case that the distance of current probe was located from 10[m] to 100[m] and the measuring frequency was ranged in 55 [Hz], 128[Hz], 342[Hz], and 513[Hz]. The results could be help to determine the position of auxiliary probe when the ground impedance was measured at grounding system.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.88-93
• /
• 2004

This experimental study was carried out to evaluate effect of the radiation heat flux for the pool and spill fire in petroleum storage tanks, which were made form steel. Each of them had the capacity of 250, 2500 and 25000 liter, respectively. The effects of the radiation heat flux are as follows; 1) The intensity of radiation heat flux from a flame decreased exponentially with increasing distance from outside wall of tanks, and increased significantly with surface area of tank and dyke. 2) In the case of 25000L tank, the radiation heat flux was about max. 98.9kW/$m^2$ in 1m from wall of tank. 3) The distance, that was able to ignite wood or plastics by radiation heat flux of approximately 12.5kW/$m^2$, was about 3.14m from wall of 25000L tank.

• 자동차안전학회지
• /
• 제11권3호
• /
• pp.7-12
• /
• 2019

AEB (Autonomous Emergency Braking system), a system in which vehicles automatically recognize forward objects or pedestrians and actively brake when forward collisions are expected, has been mandated by NHTSA (National Highway Traffic Safety Administration) and IIHS (Insurance Institute for Highway Safety) for all vehicles sell in the United States since 2022, and AEB research is also actively underway in korea. In this study, it can be confirmed that the passenger injury is reduced according to the AEB detection distance when it is assumed that the AEB is mounted in the actual event generated from KIDAS (Korea New Car Assessment Program) data through various analysis programs.

• 한국안전학회지
• /
• 제23권4호
• /
• pp.19-24
• /
• 2008

This paper presents and discusses the experimental results on the F10T high strength bolts used in the T-flange joint structure. The experimental works were carried out for the parameters which are flange web thickness, the distance between bolts, prying ratio. The results show that the working stress imposed to bolts decreases as the flange web thickness increases on the other hand the imposed stress to the bolts increases as the distance between two bolts increases. In other words the strength of the T-flange joint increased as the web flange thickness increases and the distance between two bolts decreases. The prying ratio is increased as the distance between two bolts increases and as the flange web thickness decreases However, the degree of stress decrease in flange thickness variation is not that high as the distance variation between two bolts. Finally the equation for predicting the failure stress in T-flange joint structure using F10T high strength bolts was suggested.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.110-116
• /
• 2013

Curvic coupling of mill turret should maintain disk weight and the cutting resistance which occurs the machining operation and must also have power transmission function. In order to improve machining operation range, the ejecting distance from curvic coupling to the disk must increase as much as possible. But moment is increased by the lack of capacity of the curvic coupling. Increase of moment is the cause of vibration/noise and degradation of machining performance not only stability problem. The manufacturer of mill turret has no the design information between the ejecting distance and the cutting resistance with safety of curvic coupling. Therefore this study describes a finite element analysis model of mill turret using ANSYS workbench. The structural analyses and modal analyses with varying of the ejecting distances and cutting resistances are performed. Finally the equation for relationship between the critical ejecting distance and the cutting resistance is defined under 5 of the safety factor for the maximum von-Mises stress at the curvic coupling.

• 대한안전경영과학회지
• /
• 제13권4호
• /
• pp.179-191
• /
• 2011

When it comes to the training program conducted by company to improve job performance ability, it would be not a investment but a waste if the training contents is not practically applied to the business accomplishment. Even though some people raise a question on the job application of postal distance training, funded by employment insurance, the study on the job application of postal distance training shows that the components of the training program have a positive effect on it and the model has 60.5% validity. Moreover, its control effect on environmental support and individual characteristics has been partially established. The study has been conducted by questioning survey with the employees who completed a postal education 3 months ago. With the result, we can find that the postal distance training benefits employees to improve their job performance abilities and expect that it continuously plays a crucial role in the field of company training through the development of high-quality training programs.

• International journal of advanced smart convergence
• /
• 제10권3호
• /
• pp.232-244
• /
• 2021

This study analyzed the changes in carbon monoxide, carbon dioxide, oxygen and visual distance by presence of sprinkler heads and their types in the event of a fire in an indoor gymnasium. Based on carbon monoxide and visual distance that affects human bodies enormously, first, if there is no sprinkler head, carbon monoxide will reach 0.4% within five seconds and visual distance rapidly shrank within five seconds. Seconds, in the event of standard sprinkler heads, carbon monoxide gradually increased from 30 seconds onwards and visual distance rapidly shrank after five seconds. Second, Third, if there are special sprinkler heads, carbon monoxide fluctuated after opening the head and visual distance became 5m or below from 15 seconds. Finally, in the event of early response sprinkler heads, carbon monoxide fluctuated up and down at 3 seconds due to falling water drops. Visual distance shrank up to 5m or below at 6 seconds. In the future, time for operation of each sprinkler head shall be analyzed.

• 한국광학회지
• /
• 제28권1호
• /
• pp.16-21
• /
• 2017

고광도 섬광에 의하여 사람 눈에 미치는 영향을 체계적으로 이해하는 것은 고섬광의 사용상에나 눈의 보건의학적인 관점에서 큰 가치가 있다. 본 논문에서는 고섬광의 안전지표로서 노출제한거리를 제안하고, 섬광의 특성으로부터 노출제한 노출제한거리를 구하는 방법을 제시한다. 본 연구에서 고려한 고섬광에 대한 노출제한을 결정하는 요인은 망막에서 투영되는 열적 에너지이며 이는 망막의 열적위험을 나타내는 열적유효복사휘도로 표현된다. 고섬광의 노출제한거리는 열적 유효복사휘도 또는 광도와 광원 반경에 거의 비례하나 지속시간에는 거의 의존하지 않는다. 고섬광의 노출제한거리가 지속시간에 비례하지 않는다는 점은 눈에 미치는 영향이 노출되는 시간에 비례할 것이라는 기대와는 다른 중요한 발견으로 생각된다. 본 연구에서 제안된 노출제한거리는 고섬광의 연구개발과 활용에서 뿐만 아니라 눈을 보호하는 보건의학 분야에서도 안전지표로서 중요하게 활용될 것으로 기대된다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권2호
• /
• pp.159-164
• /
• 2022

The study developed a radiation dose measurement program in the radiology laboratory to measure how much exposure the students are exposed to during the radiology class, to request for the improvement and the revision of the current Nuclear Safety Act. The experimental program is shown in the following figure, and experiments were conducted to determine the degree of radiation exposure in the control room with a lead gown at a distance of 1 m, 2 m, and 1 m, and in a control room with a radiographic lead glass wall. The duration of the experiment was 3 months from April to June, when radiation imaging practice classes were conducted, and 128 hours of imaging practice per month were conducted. In order to find out the dose of radiation dose during radiology imaging practice class, the experiment was carried out from April to June for 3 months, and according to the program, the results of exposure dose were 0.34 mSv at 1 m distance, 0.01 mSv at shielding of lead gown at 1 m distance, 0.16 mSv at 2 m distance, and 0.01 mSv at control room with radiation lead glass wall. The exposure dose from the test results was much below the annual general public limit dose of 1 mSv. The restriction on the operation of the radiation equipment in the practice of the students is a regulation that infringes the right of students to learn, and amendments or exemptions of Nuclear Safety Act should be enacted to ensure that it does not violate the fundamental right to learn for students in radiology.