• 한국안전학회지
• /
• 제31권1호
• /
• pp.7-12
• /
• 2016

This study first focuses on the quantitative evaluation of both compulsory and voluntary safety certification of industrial machines and devices. Based on the results of statistical analysis, effectiveness of those safety certifications were confirmed. In order to reduce both the frequency and the strength of industrial accidents associated with industrial machines and devices, major target of safety regulations needs to be shifted from users to manufacturers. Adjustment of industrial machines and devices which are subject to compulsory safety certification and implementation of risk assessment are further suggested. As for the voluntary certification, reestablishment of the concept of voluntary safety certification and balance between compulsory and voluntary certifications is discussed. Voluntary safety certification is further suggested as a mean to manage safety of industrial machines and devices which are not subject to any safety regulations.

• 대한안전경영과학회지
• /
• 제19권3호
• /
• pp.27-33
• /
• 2017

Electrical product safety certification is for public safety. Korea electrical safety certification (KC) is being tested and certified on the base of Korean electrical appliance safety act and KC scheme. There are operating system and Electrical safety standards in the KC scheme. KC' operating system was adapted from japan operating system of Japan certification scheme. But KC certification' electrical safety standard was adapted from IEC standards of IECEE CB scheme. So There are many problems such as difference of version between KC standards and IEC standards, discrepancy between operating system and standards. Therefore, This paper analyzed the reason of discrepancy and proposed the improved KC certification operating system in order to reduce cost and to save time in the procedure of issuing KC approval for public safety in using electrical products and also for global competence.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.32-42
• /
• 2020

In this study, in order to secure the necessity of introducing the safety certification system for the assembled temporary equipment and materials, the feasibility of the introduction was analyzed through literature review, structural analysis, and actual experiments and surveys related to the assembled temporary equipment and materials. In the previous studies, it was found that the research on the assembled temporary equipment and materials was insufficient, and it was possible to grasp the necessity of introducing the safety certification system for the assembled temporary equipment and materials. In addition, in the results of the serious accident analysis, it was found that the soundness of the temporary equipment and materials is determined by the structural characteristics after it was assembled. As a result of the feasibility analysis of the introduction of the safety certification of the assembled temporary equipment and materials through structural analysis, it is possible to effectively and rationally reflect the main geometrical influence factors, and to introduce the safety certification system that can test the procedures and procedures of the assembled temporary equipment and materials and based on it. It was found that there is a need. As a result of feasibility analysis on the necessity of introducing the safety certification system for assembled temporary equipment and materials through actual experiments, the existing single member performance evaluation has limitations in evaluating the structural performance of the assembled temporary equipment and materials. It was found that there is a need to introduce a safety certification system. As a result of gathering opinions on the feasibility of introducing the safety certification system for assembled temporary equipment and materials of manufacturers and users through the survey, it was found that the overall positive response result was high and the effectiveness was high.

• International Journal of Safety
• /
• 제5권1호
• /
• pp.24-28
• /
• 2006

This study focuses on the issue of improving safety management of elevators. The role of certification and supervision in reducing the associated accidents is specifically addressed. The results of simple statistical analysis suggests that a certification procedure emphasizing the quality assurance during manufacturing and supervision during assembly and installation of elevators are needed and can be effective in minimizing the associated accidents.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.59-65
• /
• 2017

This study examined the stakeholder cognition of the safety certification marking system by surveying manufacturers, lessors, and users. In addition, among various issues about safety certification marking systems, the improvement of safety certification marking contents was suggested in order to guarantee quality of temporary equipments. The results by statistical method show that it is necessary to increase of users' understanding about the safety certification marking system. In addition, the quality management system of temporary equipments should be introduced to control the actual condition that temporary equipments of various product companies are mixed in a site during removal and reuse processes. For detailed marking contents, it is recommended that a certification mark, an identification number, and the production year should be displayed and the manufacturer name could be selectively presented. Detail informations such as a safety certification number, a product company, a model type or name, a specification, a weight, a product number, and the location of a certification mark should be identified by the identification number.

• 항공우주시스템공학회지
• /
• 제5권1호
• /
• pp.30-35
• /
• 2011

Certification flight test is very risky and there are many hazards. Because the flight test is performed with the aircraft, that is safety and flight characteristics are not proven. And the test items and conditions are critical. If there is loss of aircraft during certification flight test, the certification program, development period can be delayed. Therefore, maintaining safety of the aircraft during flight test is very important. There are not much flight test experiences in Korea. However, developed nations has long history of flight test and experiences of flight test accidents. Based on these experiences, they has developed systematic management methods for the flight test safety. In this study, I would like to introduce safety management and risk assessment of the certification flight test.

• 대한안전경영과학회지
• /
• 제23권3호
• /
• pp.1-9
• /
• 2021

Crane is an important equipment for the transport of heavy goods in industrial sites, but it is also known as one of the most fatal machines. In order to reduce crane accidents, it is necessary to minimize human errors during crane operations. To achieve this, ergonomic design principles are recommended to be reflected from the crane design stage. The study analyzed the safety certification standards for crane that should be fulfilled at the crane design and manufacturing stage. This study selected five representative ergonomic design principles (feedback, compatibility, consistency, full-proof, and fail-safe) by surveying heuristic evaluation principles that are widely used for usability evaluation in early design stage. Next, the principles were applied to the safety certification standards to identify insufficient clauses. This study identified 12 insufficient clauses out of 119 in the current safety certification standards for crane and discussed their improvement directions to comply the ergonomic principles. The analysis results of this study can help of improving the safety certification standards and the method used in this study can also be applied to identify insufficient clauses in the safety certification standards for other industrial machines such as press machine and lift.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.95-102
• /
• 2018

This study investigated the improvement of safety certification marking method and location marked on temporary equipments in order to guarantee the quality and safety of temporary equipments. The survey was performed for the stakeholder (manufacturers, lessors, and users) to find out the effective way that all stakeholder can agree each other. The main reason which users checked the safety certification making is that the mandatory safety certification marking can prevent the usage of poor and illegal temporary equipments. For the marking method, all stakeholder agreed that a depressed engraving method was an effective and usable displaying method. The opinions about the position of safety certification marking among the users, lessors, and manufacturers did not come into the agreement. The manufacturers preferred the marking position in which the engraving process is easy, but users wanted the conspicuous place such as vertical member. However, it is necessary to continuously study ways to adopt the position preferred by the users.

• 대한안전경영과학회지
• /
• 제17권2호
• /
• pp.161-175
• /
• 2015

This study analyzed that the infant carrier standard affects the satisfaction of certification. Baby Carrier Safety requirements in the Republic of Korea is enforceable by court duty certification. Therefore, a test was conducted to compare with the safety requirements of the United States and Europe and the survey was conducted to know how much manufacturers and importers are satisfied with the certification. According to the test result, there is a difference between domestic and foreign safety requirements about flame retardancy. As a result of the survey, The satisfaction of the certification is proportionate to the one of product standard.

• 자동차안전학회지
• /
• 제14권4호
• /
• pp.106-112
• /
• 2022

The purpose of this study is to explore ways of improving the motor vehicles safety certification system in preparation for the deployment of Lv.4 or higher autonomous vehicles. In order to effectively achieve the objectives of this study, theoretical and empirical research methodologies were employed, including literature review of prior research, government-published data, etc.; comparative research on legislative cases of other countries regarding motor vehicles safety certification; historical and legal research on domestic systems; legal analysis to explore approaches for improvement, etc. Some argue that the type approval system is needed in preparation for deploying autonomous vehicles, but there are several limitations in moving to the type approval system from the self-certification system currently adopted in Korea. First, there is a possibility that the system may be in conflict with the Korea-U.S. MOU regarding Foreign Motor Vehicles (1988) and the Korea-U.S. FTA (2011); second, there is a risk of undermining the cause of the self-certification system, which is the autonomy of manufacturers; third, the boundary between autonomous vehicles and non-autonomous vehicles is unclear; and fourth, the type approval system may hinder technological competitiveness. On the other hand, considering that the Korea-U.S. FTA and the UNECE IWVTA recognize exceptions to deal with road safety and risks to human health or the environment, and have a pre-certification system for some auto parts such as pressure-resistant containers, it can be said that there is room to introduce the type approval system for supplementation purposes. To improve the motor vehicles safety certification system while ensuring the safety of autonomous vehicles of Lv.4 or higher, the targets of type approval should be defined and the criteria, procedures, etc. for type approval should be established. At the same time, the consistency between motor vehicle-related laws and harmonization with international standards need to be considered.