• 한국건설안전학회 논문집
• /
• 제2권2호
• /
• pp.76-81
• /
• 2019

무인타워크레인의 운전자격 취득이 쉬워지고 불법개조가 늘어나며 소규모 건설현장에서도 무인타워크레인이 점차 활용되고 있다. 그러나 운전경험이 부족한 타워크레인 운전자의 문제가 커지면서 안전사고도 늘고 작업자도 사고위험에 노출되고 있다. 본 연구에서는 무인타워크레인 사고를 분석하여 사고 원인을 도출하였다. 그 후, 사고 원인의 중요도를 도출하기 위해 AHP 기법을 사용하여 분석하였다. 이 연구의 결과는 무인타워크레인을 사용하는 사업자와 건설 노동자들이 작업 규칙을 따르지 않는다는 것이다.

• 한국안전학회지
• /
• 제20권4호
• /
• pp.138-147
• /
• 2005

The accidents which occurred between during february of 1997 to December of 2004 at the 2nd Daegu subway construction site have been classified. The accident types of injuries include accidental falls, falling objects which consist 53.4% of all accidents. This result is higher than the same types of accidents occurring at construction sites which are 46.3%. It was found that the 3.4 times more accidents are caused from safety measures and working methods than problems caused by lack of supervision. 78.0% of the accidents occurred at stations and at the ventilation area. 31.9% of the accidents occurred when the operation was near completion($81.0%{\sim}100.0%$) which means there was pressure to complete the operation to meet the set due date. In the case of 50.0% of the accidents were caused by workers with less than two month work experience. And lumbago is 6.9%, especially lumbago didn't showed before. Maybe accident should increase if not reduce a possibility of danger. In this study a literature search has been conducted for the cause of these accident types and respective suggestions are provided.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.173-174
• /
• 2018

Recently, a growing number of accidents have taken place at construction sites, causing serious casualties. To prevent accidents or minimize damage, it is necessary to develop the safety precautions education is essential. However, the effects of safety education do not have as much effect as the importance of safety education. so As a new direction, we are looking forward to effective education by simulating realistic environments using VR. The safety training method used to experience and learn dynamic situations in a limited room wearing HMD is combined with VR. It will be the start of the construction industry going forward.

• 한국안전학회지
• /
• 제34권6호
• /
• pp.88-95
• /
• 2019

It has been only a few years since drones have been introduced to Korea, and as the use of drones has increased in industrial sites as well as in hobby activities, accidents such as workers' body parts coming into contact with rotating propellers have been occurring since 2016. Industrial accident cases are being filed. In the case of a remote control vehicle, if you release the remote controller in the event of an abnormal situation, it stops in place and no further danger occurs but in case of drones flying over the sky is different. Sudden motor stops during flight, uncontrolled changes in flight posture, loss of radio waves, loose propeller, etc, numerous factors can lead to accidents due to unintentional movements. Therefore, drone operators need safety knowledge as well as high knowledge about drones. However, drones with a weight of less than 12 kg can fly without a pilot's certification, and therefore, a minimum accident prevention measure is required. 10 accidents approved as industrial accidents since 2016, 23 accidents surveyed by general drone operator, 40 accidents surveyed by the Korean Consumer Resources Unfortunately for the purpose of writing this paper, drones are a new species and do not have many parameters for analysis but my experience has shown that the type of disaster does not deviate significantly. In addition, there is no paper that analyzes drone related industrial accidents not only in Korea but also in other countries. However, even if you watch an overseas drone accident video through YouTube, it is not much different from the case that occurs in Korea. I hope that this study will be of little help to all the drone pilots as well as the work safety of industrial drones used in industrial sites.

• 한국가스학회지
• /
• 제12권4호
• /
• pp.29-33
• /
• 2008

본 연구에서는 수소충전소에 대한 교육 및 가상체험 프로그램을 구축하였으며, 수소와 안전모듈, 수소 충전소 모듈, 가상현실 체험공간 모듈 및 전문가 그룹을 대상으로 한 사고 시나리오 모듈 4가지로 구성되었다. 본 프로그램을 통해 사용자는 수소충전소 이론과 운전상태를 간접적으로 체험하고, 수소충전소 관련 정보를 습득할 수 있다. 또한 수소충전소에서 발생이 가능한 다양한 유형의 사고 시나리오 체험과 수소충전소의 안전운전과 사고대응을 위한 emergency response plan 및 standard operating procedure를 습득하여 관련 종사자에게 실질적인 사고발생 메커니즘과 그에 따른 대응방안에 대한 교육 및 안전홍보가 가능하다. 본 연구를 통하여 개발된 버츄얼리얼리티 프로그램은 수소에너지 시장도입에 필수적인 수소충전소 기술개발 및 건설 활성화에 도움이 될 것으로 기대된다.

• Safety and Health at Work
• /
• 제8권4호
• /
• pp.410-412
• /
• 2017

Post-traumatic stress disorder (PTSD) is a serious problem not only among workers who experience industrial accidents but also among workers who witness such accidents. Early intervention is needed to prevent prolonged psychological problems. There has been no study conducted regarding the psychological problems of and interventions for bystander workers in Korea. This study introduces the experience of intervention on psychological problems at the Busan Workers' Health Center workers who witnessed their colleagues' death. An investigation and an intervention were conducted according to the Korean Occupational Safety and Health Agency (KOSHA) Guide. In total, 21 individuals including indirect observers showed statistical differences on scores of the Impact Event Scale Revised and the Patient Health Questionnaire 9 after the intervention. Future interventions and research involving a larger sample size over a longer period are needed. The KOSHA Guide could be a useful tool for urgent psychological intervention in the event of major workplace disasters.

• Nuclear Engineering and Technology
• /
• 제26권1호
• /
• pp.41-53
• /
• 1994

1991년 2월 미하마원전에서 발생한 증기발생기 세관 파열사고에 대한 경험을 바탕으로, 본 사고에 대한 고리 1호기의 대처능력을 평가하기 위하여 해석을 수행하였다. 고리 1호기의 계통설계 및 운전조건은 미하마 2호기와 아주 유사하기 때문에 고리 1호기에서 발생한 가상의 증기발생기 세관 파열사고시의 사고경위 및 전개에 대한 평가가 필요하였다. 해석은 고리 1호기 EOP를 근거로 현실적으로 가능하게 수행되었다. 해석결과, 파열된 세관을 통한 누출은 사고후 약 40분 후에 정지되었으며, 고리 1호기는 유사한 증기발생기 세관 파열사고의 경우 충분한 대처능력이 있음을 보였다. 그러나, SI 신호작동후 소외전원으로 부터의 비안전등급 AC전원으로 단절되는 설계에 대한 재고가 필요하며, EOP의 운전절차가 운전원의 적절한 판단을 요구하기에는 다소 충분치 못함을 보였다. 또한 미하마 원전의 사고를 실험적으로 모사한 LSTF의 실험결과를 이용 해석코드인 RELAP5/MOD3의 평가능력에 대하여 해석을 수행하였다. 해석결과 코드는 사고 초기의 누설량 예측을 제외하고는 일반적으로 실험결과와 잘 일치하고 있음을 보였다.

• 한국응급구조학회지
• /
• 제11권2호
• /
• pp.67-86
• /
• 2007

This study is about the drunken drivers' accident patterns and behavior and aims at providing basic data for developing measures to secure safety against accidents by drunken drivers and programs to cultivate good drinking habits. For this purpose, this study conducted a questionnaire of 800 persons over 20 years of age in the selected 20 companies with more than 30 employees in the 4 regions(Daegu, Masan, Changwon, and Jinhae) and analysed the 653 sheets except invalid ones among the returned 673 survey sheets in total(return rate 84.13%), and the researcher conducted a man-to-man interview with each subject from June 20th to July 31st 2006. The result are as the following. As the experience of causing an accident by drinking, the 79.1% of them had the experience, and in case of the subjects with excessive drinking over 4 times a year, the rate of the accident by drinking showed as high as 90.5%. As the patterns of accidents, in male subjects, violence(38.5%) and traffic accidents(37.1%) showed high, while in the female, hurts from falls and fall accidents(40.2%) were found be high. In case of the traffic accidents among the accidents by drinking, the rate of causing serious damage to the life was found to be 89.3%, so it showed that the traffic accidents caused by drinking were influencing on the life much. In conclusion, the drinking problem may be controlled by each individual's will, but without change of social environment and system around people, the problem can not be eradicated. Therefore there should be social infrastructure which can help people to actively live their life with exercises and hobbies, and in order to prevent the reoccurrence of a drink accident, and social structure in which there are education programs for drink accident causers and one can change the perception about drinking culture, should be formed.

• International Journal of Safety
• /
• 제11권2호
• /
• pp.29-37
• /
• 2012

Since most construction workers comprehend information on work through sight, the importance of safety signs are increasing by the day. In Korea, due to the sharp economic progress and the higher standard of the workforce, since the end of 1980, each year the number of foreign workers entering the country who working simple technical jobs have increased this condition. This study researched safety signs, which are the final accident prevention measures at the workplace. Based on the study, comprehension of the standard safety signs of the Occupational Safety and Health Act (OSHA) was lacking at a level of 2.5. Also, the perception level of the Industry Public Safety Law (38%) was very low. And, it was found that sex and experience or non-experience in safety training was not an issue in the level of understanding. However, when satisfying the standards of the Occupational Safety and Health Act and changing the safety signs, the level of understanding went up to 3.49 and the perception level was increased significantly to 70%. Thus, it is concluded that, since the foreign workers are mainly from non-English speaking countries and because the workers of Korea are not familiar with English, in order to provide proper safety information, there must first of all be simplistic and concise pictograms. This will provide needed information and must be coupled with simple English words that can give additional information to the worker and be effective in helping him understand and perceive the safety sign. Also, it has been determined that the existing forms of safety signs and their effectiveness in industry accident prevention must be reassessed.

• 대한인간공학회지
• /
• 제36권3호
• /
• pp.231-244
• /
• 2017

Objective: This study aims to understand the occupational injury characteristics of the workers in the motor vehicle parts (automobile parts) manufacturing industry and to present basic guidelines on accident prevention through accident analysis. Background: There occur many occupational injuries in the motor vehicle parts manufacturing industry. But there were few researches for the occupational injuries of the workers in the motor vehicle parts manufacturing industry. Method: This study analyzed the data of occupational injuries of 1,609 workers in the motor vehicle parts manufacturing industry in 2015. The accident characteristics were analyzed by dividing them into worker related factors and accident related factors. Results: Among the occupational injuries of the workers in the motor vehicle parts manufacturing industry, 80.6% of the victims were males, 64.0% were older than 40. 57.8% of the victims were employed by the companies with less than 50 workers. In addition, there was a difference in accident characteristics according to age, work experience, employment type, events or exposures, accident time of the day, agents, natures of injuries and illnesses, injured organs and injured body part. Conclusion: It is important to prevent equipment/machinery accidents. For this purpose, more efforts should be made to establish safety measures faithful to the basics of safety devices and safety work procedures. It is also suggested that prevention of disasters should be intensively carried out for workplaces with less than 50 employees and middle-aged and elderly people. Application: The result can be used to present guidelines for preventative measures for the workers in the motor vehicle parts manufacturing industry including safety education/training.