• Journal of Microbiology and Biotechnology
• /
• 제28권3호
• /
• pp.409-417
• /
• 2018

Biologically produced 2,3-butanediol (2,3-BDO) has diverse industrial applications. In this study, schematic isolation and screening procedures were designed to obtain generally regarded as safe (GRAS) and efficient 2,3-BDO producers. Over 4,000 candidate strains were isolated by pretreatment and enrichment, and the isolated Bacillus strains were further screened by morphological, biochemical, and genomic analyses. The screened strains were then used to test the utilization of the most common carbon (glucose, xylose, fructose, sucrose) and nitrogen (yeast extract, corn steep liquor) sources for the economical production of 2,3-BDO. Two-stage fed-batch fermentation was finally carried out to enhance 2,3-BDO production. In consequence, a newly isolated Bacillus licheniformis GSC3102 strain produced 92.0 g/l of total 2,3-BDO with an overall productivity and yield of 1.40 g/l/h and 0.423 g/g glucose, respectively, using a cheap and abundant nitrogen source. These results strongly suggest that B. licheniformis, which is found widely in nature, can be used as a host strain for the industrial fermentative production of 2,3-BDO.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.668-674
• /
• 2002

Structural integrity assessment is indispensable for preventing catastrophic failure of industrial structures/components/facilities. This diagnosis of operating components should be done periodically for safe maintenance and economical repair. However, conventional standard methods for mechanical properties have the problems of bulky specimen, destructive and complex procedure of specimen sampling. Especially, the mechanical properties at welded zone including weldment and heat affected zone could not be evaluated individually due to their size requirement problem. So, an advanced indentation technique has been developed as a potential method for non-destructive testing of in-field structures. This technique measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation such as yield strength, tensile strength and work-hardening index. Also indentation technique can evaluate a residual stress based on the concept that indentation load-depth curves were shifted with the direction and the magnitude of residual stress applied to materials. In this study, we characterized the tensile properties and welding residual stress of various industrial facilities through the new techniques, and the results are introduced and discussed.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.8-15
• /
• 2014

This study investigates structural and vibration analyses for three types of bike frame fork models. As long as the maximum equivalent stresses of these models are lower than the yield stress, the three models are considered to be safe structurally. Type 3, with a maximum equivalent stress of 169.23 MPa, has the lowest stress among the three models and the strongest strength. Types 1, 2 and 3 have natural frequencies lower than 270 Hz. Type 3, with a critical frequency of 118 Hz, has the best durability under vibration among the three models. In order to decrease the vibration transmitted to a bike rider riding on a rough road, the impact due to vibration can be relieved by selecting a Type 3 model from among the three models. The results of this study can be effectively utilized for the design of a bike frame fork as this allows the anticipation and prevention of damage caused by durability issues.

• Journal of the Korean Wood Science and Technology
• /
• 제42권6호
• /
• pp.675-681
• /
• 2014

최근 친환경 재료에 대한 국민들의 관심이 높아지면서 실내사용목재의 이용도 증가하고 있다. 본 연구는 실내사용 목재의 내화성 부여를 위한 기초자료로 활용될 수 있는 열특성 분석에 그 목적이 있다. 열방출률과 열방출량, 가스발생량, 중량감소 등의 연소성질을 열중량 분석(TGA) 및 콘칼로리미터(KS F ISO 5660-1)의 방법으로 분석하였다. 분석결과 목재의 재질적 특성은 연소적 특성으로 발현되었으며, 열적성질과 연소가스 발생량과의 관계는 상관관계가 높게 나타났다. 탄화층 형성에 의한 연소억제 효과도 수종에 따라 현저한 차이를 보였다. 총열방출량과 중량감소량은 상관관계가 높게 나타났다. 점화시간과 총열방출량 등의 자료는 목재의 내화성능부여 등의 기초 자료로서 매우 중요하리라 판단되었다.

• 대한화장품학회지
• /
• 제22권2호
• /
• pp.174-181
• /
• 1996

The novel synthesis of 3-aminopropyl dihydrogen phosphate(3-APPA; 3-Aminopropane phosphoric acid), and its applicability to the skin as a cosmetic raw material in terms of its efficacy and toxicology were presented. The phosphorylation of 3-amino-1-propanol was carried out via cyclization into 6-membered 2, 6-oxaza-phosphoryl ring in the presence of phosphorous oxychloried and an organic base. The subsequent ring-opening hydrolysis and crystallization afforded the highly purified product in 90% isoloated yield. The method is much superior to the previous literature phosphorylation methodsm, as the procedure is simple and high-yielding. To confirm the efficacy of 3-APPA, several activities related to anti-aging capacity were measured. In-vitro human fibroblast, linear and 3-dimensional collagen matrix culture revealed that 3-APPA stimulated the proliferation of fibroblasts, and enhanced the synthesis of collagen, which showed 3-APPA's potency for skin wrinkle reduction. The toxicolgical aspect of 3-APPA was also extensively examined. In vivo toxicity tests such as acute oral toxicity, eye irritation, human patch, and the repeat insult human patch test proved 3-APPA to be a safe material. Thus 3-APPA can be used as an effective anti-aging agent for various cosmetic formulations.

• Preventive Nutrition and Food Science
• /
• 제8권4호
• /
• pp.336-342
• /
• 2003

The effects of cultivation methods (cultivation of curled-shaped type, M-1; conventional cultivation, M-2; growing after treatment with a growth regulator, M-3; cultivation by the combination of M-1 and treatment with oak charcoal, M-4) on the quality characteristics of soybean sprouts were studied by the measurement of growth characteristics. This study also investigated the changes in shelf-life stability of the new soybean sprouts (NSB) using M-4, which was cultivated with oak charcoal and treated with antimicrobial Citrus sunki seed extract. Among the soybean sprouts grown for six days at the high temperature and humidity environment (90$\pm$5% RH, 25$\pm$1$^{\circ}C$), M-1 revealed no significant difference in terms of quality, such as the harvest yield, the rot rate and the growth characteristics when compared with M-2. M-3 showed no significant difference in growth characteristics, of hardness, and sensory evaluation scores when compared with the soybean sprouts grown by conventional methods. NSB had a low number of total microorganisms and had a better appearance after five days of storage than did the control group (M-2). These findings demonstrate that chemical-free and clean soybean sprouts can be grown by combining oak charcoal and antimicrobial Citrus sunki seed extract, thereby meeting the consumer demand for safe, chemical free sprouts.

• Journal of Acupuncture Research
• /
• 제31권1호
• /
• pp.105-110
• /
• 2014

Objectives : The objective of this study is to analyze the single-dose toxicity of horse placenta hydrolysate extracts. Methods : Sprague-Dawley rats were chosen for the study. Doses of horse placenta hydrolysate extracts, 2,000 mg/kg, 1,000 mg/kg and 500 mg/kg, were administered to the experimental group, and the same doses of normal saline solution were administered to the control group. This study was conducted under the approval of the Institutional Animal Ethics Committee. Results : In all 4 groups, no deaths occurred, and the horse placenta hydrolysate extracts administered by oral was over 2,000 mg/kg. No significant changes in the weight between the control group and the experimental group were observed. To check for abnormalities in organs and tissues, we used microscopy to examine representative histological sections of each specified organ, the results showed no significant differences in any organs or tissues. Conclusions : The above findings suggest that treatment with horse placenta hydrolysate extracts is relatively safe. Further studies on this subject should be conducted to yield more concrete evidence.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.1-6
• /
• 2012

This paper presents a stress safety of a composite pressure cylinder for a hydrogen gas vehicle. The composite pressure cylinder in which is composed of an aluminum liner and carbon fiber wound layers contains 104 liter hydrogen gas, and is compressed by a filling pressure of 70 MPa. The FEM computed results are analyzed based on the US DOT-CFFC basic requirement for a hydrogen gas cylinder and KS B ISO specification. The FEM results indicate that the stress, 255.2 MPa of an aluminum liner is sufficiently low compared with that of 272 MPa, which is 95% level of a yield stress for aluminum. Also, the composite layers in which are wound on the surface of an aluminum cylinder are safe because the stress ratios from 3.46 to 3.57 in hoop and helical directions are above 2.4 for a minimum safety level. The proposed composite pressure cylinder wound by carbon fibers is useful for 70 MPa hydrogen gas vehicles.

• Nuclear Engineering and Technology
• /
• 제49권4호
• /
• pp.838-849
• /
• 2017

This paper proposes penalty factor equations that take into consideration the weld strength over-match given in the classified form similar to the revised equations presented in the Code Case N-779 via cyclic elastic-plastic finite element analysis. It was found that the $K_e$ analysis data reflecting elastic follow-up can be consolidated by normalizing the primary-plus-secondary stress intensity ranges excluding the nonlinear thermal stress intensity component, $S_n$ to over-match degree of yield strength, $M_F$. For the effect of over-match on $K_n{\times}K_{\nu}$, dispersion of the $K_n{\times}K_{\nu}$ analysis data can be sharply reduced by dividing total stress intensity range, excluding local thermal stresses, $S_{p-lt}$ by $M_F$. Finally, the proposed equations were applied to the weld between the safe end and the piping of a pressurizer surge nozzle in pressurized water reactors in order to calculate a cumulative usage factor. The cumulative usage factor was then compared with those derived by the previous $K_e$ factor equations. The result shows that application of the proposed equations can significantly reduce conservatism of fatigue assessment using the previous $K_e$ factor equations.

• 대한약침학회지
• /
• 제14권3호
• /
• pp.47-53
• /
• 2011

Objectives: This study was performed to analyse the effects of Sweet Bee Venom(SBV-purified melittin supported by G&V Co., the major component of honey bee venom) on the respiratory system in rats. Methods: All experiments were conducted at Biotoxtech Company, a non-clinical studies authorized institution, under the regulations of Good Laboratory Practice(GLP). Male rats of 5 weeks old were chosen for this study and after confirming condition of rats was stable, SBV was administered in thigh muscle of rats in 0.175, 0.35 and 0.7 mg/kg dosage. And checked the effects of SBV on the respiratory system using the whole body plethysmography. And respiratory rate, tidal volume and minute volume of rats were checked after administered SBV (melittin). Results: 1. In the measurement of respiratory rate, there were not observed any significant differences compared with control group. 2. In the measurement of tidal volume, there was not observed any significant differences compared with control group. 3. In the measurement of minute volume, 0.35mg/kg dosage group showed significant differences compared with control group. But we estimated that this result was caused by individual differences. Conclusions: Above findings suggest that SBV seems to be safe treatment in the respiratory system of rats. And further studies on the subject should be conducted to yield more concrete evidences.