• Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.1-7
• /
• 2008

Recently the wind energy has been alternatively used as a renewable energy resource instead of the mostly used fossil fuel due to its lack and environmental issues. This work is to propose a structural design and analysis procedure for development of the low noise 100W class small wind turbine system which will be applicable to relatively low speed region like Korea and for the domestic use. Structural analysis including load cases, stress, deformation, buckling, vibration and fatigue life was performed using the Finite Element Method, the load spectrum analysis and the Miner rule. In order to evaluate the designed structure, the structural test was carried out and its test results were compared with the estimated results. In addition, the blade should be safe from the impact damage due to FOD(Foreign Object Damage) including the bird strike. In order to analize the bird strike penomena on the blade, MSC. Dytran was used, and the applied method Arbitrary Lagrangian-Eulerian was evalud by comparison with the previous study results.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.3
• /
• pp.265-282
• /
• 2000

Despite manufacturers' effort to provide safe and reliable products, a number of product-related accidents occur all over the world resulting in much damage to property, personal injury and even loss of life. Considerable evidence indicates that some accidents arise from user negligence, but most are due to the design, manufacture, and distribution of unreasonably dangerous products when compared to their use. As a result, a tremendous number of product liability lawsuits have been filed, many times causing huge amount of financial damages to manufacturers. Furthermore, with increasing government regulation and growing power of consumer lobbies, manufacturers might be more exposed to product liability claims in the future than now. The objectives of this study are twofold: to provide a framework of future research on product liability and safety and to introduce a product safety policy. To accomplish these objectives, previous studies on product liability and safety were reviewed thoroughly. The product safety policy consists of two parts: (1) an engineering design strategy for reducing product-related risks and (2) a management program for a product liability loss prevention plan. The policy is essential to preventing manufacturers' liability exposure as well as designing a safer product.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.5
• /
• pp.307-315
• /
• 2015

Recently, Smart Home System(SHS) is applied in order to provide comfort, energy efficient and better security to the residence. Thus, by introducing the SHS in the house of elderly people, it is possible to provide a convenient and safe life for old people especially living alone. This paper presents the design and implementation of a low cost but yet flexible and secure smart-phone based SHS. The design is based on inter-working between Arduino board with Bluetooth and Arduino board with Ethernet shield, and the home monitor/appliances are connected to the input/output ports of this board via sensors/relays. In addition, when the old man is put on an emergency, the proposed system will automatically notify it the family. Therefore, we have implemented an inexpensive and efficient SHS for the elderly living alone by inter-working smart phones, internet server and Arduino micro-controller.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1869-1876
• /
• 2014

Car rear-view camera system supplies various services for life protection, ease of parking, and safe driving by showing the rear of the vehicle through monitor when reversing the car. In this paper we researched development methods and design of a Car Rear-view Camera System based on the Binary CDMA technology - new technology of wireless personal area network developed by Korea - that makes free installation without wired cables restriction and reduces installation costs and technology royalties.

• Wind and Structures
• /
• v.21 no.4
• /
• pp.369-381
• /
• 2015

Moore, Oklahoma was hit by an EF5 tornado on May 20, 2013. The tornado track slightly overlapped with two previous tornadoes that occurred on May 3, 1999 and May 8, 2003 respectively. A research team from Texas Tech University was deployed to investigate the performance of shelters based on observation of their post-storm conditions. Sixty-one shelter units were further documented by size, manufacturer, and date of installation if available. Then they were crossed referenced with the external databases to determine their compliance with design and construction standards by the International Code Council/National Storm Shelter Association and/or criteria from the Federal Emergency Management Agency publications. Wind intensity was estimated for each shelter location using the EF scale. Results showed a marked increase in the number of exterior underground shelters as well as the popularity of a new in-garage floor underground shelter design. All of the units provided protection for their occupants with no loss of life reported. However, one older shelter had a door failure due to neglect of maintenance. Recommendations were made to improve future performance of shelters.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.6079-6097
• /
• 2018

Safety-related systems (SRSs) has widely used in shipbuilding and power generation to prevent fatal accidents and to protect life and property. Thus, SRS performance is a high priority. The safety integrity level (SIL) is the relative performance level of an SRS with regard to its ability to operate reliably in a safe manner. In this article, we proposed an optimal design procedure to achieve the targeted SIL of SRSs. In addition, a more efficient failure mode and effects diagnostic analysis (FMEDA) process and optimization model were developed to improve cost efficiency. Based on previous IEC 61508 diagnostic analyses that revealed unnecessary costs associated with excessive reliability, the new approach consists of two phases: (i) SIL evaluation by FMEDA, and (ii) solution optimization for achieving the target SIL with minimal cost using integer-programming models. The proposed procedure meets the required safety level and minimizes system costs. A case study involving a gas-detection SRS was conducted to demonstrate the effectiveness of the new procedure.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.127-132
• /
• 2002

Recent deepwater offshore structures in Gulf of Mexico utilize butt welded tubular joints. Application of welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical because the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimating the fatigue behavior of these tubular members in the design stage is generally conducted by using S-N curves specified in the codes and standards. Applying the stress concentration factor of the welded structure to S-N approach often results in very conservative assessment because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fracture mechanics and fitness for service (FFS) technology have been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves to be used and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. An attempt was made to develop set of S-N curves based on fracture mechanics approach by considering non-uniform stress distribution and a threshold stress intensity factor. Series of S-N curves generated from this approach were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02"). Similar comparison with API X′ was made for tubular joint.. These initial crack depths are larger than the limits of inspection by current Non-destructive examination (NDE) means, such as Automatic Ultrasonic Inspection (AUT). Thus a safe approach can be taken by specifying acceptance criteria that are close to limits of sizing capability of the selected NDE method. The comparison illustrates conservatism built into the S-N design curve.

• Fire Science and Engineering
• /
• v.27 no.2
• /
• pp.40-45
• /
• 2013

In recent years, many electrical fires have occurred due to complex causes. Therefore, products are required to make with scientific design considering electrical, thermal, mechanical and environmental influences. Disasters can cause losses of life and property with fall in confidence of countries and companies. And demands for safe product have been increased by reason of recent deregulation followed by limitless competition. It is necessary to design safe product in order to improve corporate image and strengthen international competitive power. This paper addresses electrical fire case of air conditioner. The use of air conditioner have recently increased as a result of global warming. The aim of this study is to provide safety design and fire prevention measures of air conditioner through cause analysis and reappearance experiments.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.155-159
• /
• 2005

Analysis target ship is not introduced yet in domestic as steel yacht that is getting into the spotlight by leisure life in Australia or Japan. Sailing yacht or Yacht for leisure time made of FRP into controlling power fare mainly and the design and made of latest fishing boat and something of domestic is consisting mainly. To need investigated for concept is various kinds overall strength as that use mainly steel wire material structurally of steel yacht by small crafts about Longi strength, Transe strength portion even of design safety factor at subject to do Rule's allowable stress enough stable structure accomplish. But it is assessment of part intensity that become refer to most in small size ship.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.88-89
• /
• 2002

The aims of this study is to realize the structural design for development of a medium scale E-glass/epoxy composite wind turbine blade for a 750KW class horizontal axis wind turbine system. In this study, the various load cases specified by the IEC61400-1 international specification and GL Regulations for the wind energy conversion system were considered, and a specific composite structure configuration which can effectively endure various loads such as aerodynamic and centrifugal loads, loads due to accumulation of ice, hygro-thermal and mechanical loads was proposed. In order to evaluate the structure, the structural analysis for the composite wind turbine blade were peformed using tile finite element method(FEM). In the structural design, the acceptable blade structural configuration was determined through the parametric studies, and the most dominant design parameters were confirmed. In the stress analysis using the FEM, it was confirmed that the blade structure was safe and stable in any various load cases Moreover the safety of the blade root joint with insert bolts, newly devised in this study, was checked against the design fond and the fatigue.