• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.530-532
• /
• 2005

Actually, it's very difficult to discriminate the transient on underground power cable system because of the reflected signal including many noises. Therefore, in this paper, a solution based on multiple scales correlation of the transient using SWT(Stationary Wavelet Transform) is presented. It's quick and straightforward. For applying all algorithms, we just use the signal captured in single end.

• Journal of the KSME
• /
• v.31 no.4
• /
• pp.356-363
• /
• 1991

선형 탄성 유한요소 응력해석과 평균응력 효과를 고려한 저주기 피로실험으로부터 결정된 피로 특성, 그리고 국부변형률 방법을 종합하여 외경에 흠이 존재하는 자긴가공된 두꺼운 압력 용기의 피로수명이 평가되었다. 직사각형의 매우 날카로운 흠에서의 응력집중계수는 타원형 홈에서의 응력집중계수의 약 두배의 값이 얻어졌으며, 고강도 압력용기강인 ASTM A723의 저주기 피 로거동에 대한 평균응력 영향은 Morrow 및 SWT 파라메타를 이용하여 충분히 고려되었다. 균열발생이 예상되는 위험한 부분인 홈의 뿌리부분에서의 국부적인 응력, 변형률이 계산되었으며 예측된 피로수명은 실험적으로 얻어진 수명과 비교했을 때 2에서 4배의 오차를 보이면서 일치 하는 결과를 얻었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.493-495
• /
• 2002

본 연구에서는 TCP Connection을 유지하는 Stepping Stone 형태의 공격을 역추적하기 위해 사용되는 패킷 워터마크를 검출하는 시스템의 구현에 대해서 기술하고 있다. 본 연구에서 사용한 패킷 워터마크는 Sleepy Watermark Tracing(SWT)에서 사용한 virtual null string 형태의 워터마크를 사용하였으며, 이러한 워터마크의 효율적인 탐지 및 분석하는 방법을 설계 구현하였다. 본 연구의 의의는 패킷 워터마크 검출 시스템의 실제 구현을 통하여 TCP Connection Traceback 형태의 침입자 역추적 시스템에 활용할 수 있다는 것이다.

• Advances in aircraft and spacecraft science
• /
• v.4 no.1
• /
• pp.1-19
• /
• 2017

Fatigue life prediction of a multi-row countersunk riveted lap joint was performed numerically. The stress and strain conditions in a highly stressed substructure of the joint were analysed using a global/local finite element (FE) model coupling approach. After validation of the FE models using experimental strain measurements, the stress/strain condition in the local three-dimensional (3D) FE model was simulated under a fatigue loading condition. This local model involved multiple load cases with nonlinearity in material properties, geometric deformation, and contact boundary conditions. The resulting stresses and strains were used in the Smith-Watson-Topper (SWT) strain life equation to assess the fatigue "initiation life", defined as the life to a 0.5 mm deep crack. Effects of the rivet-hole clearance and rivet head deformation on the predicted fatigue life were identified, and good agreement in the fatigue life was obtained between the experimental and the numerical results. Further crack growth from a 0.5 mm crack to the first linkup of two adjacent cracks was evaluated using the NRC in-house tool, CanGROW. Good correlation in the fatigue life was also obtained between the experimental result and the crack growth analysis. The study shows that the selected methodology is promising for assessing the fatigue life for the lap joint, which is expected to improve research efficiency by reducing test quantity and cost.

• Korean Journal of Ichthyology
• /
• v.8 no.1
• /
• pp.49-55
• /
• 1996

The growth of total length(TL), total weight(TW) and somatic weight(SW) of rainbow trout, Oncorhynchus mykiss alevin at yolk absorption period was expressed by the Gompertz growth model as $TLt=2.7e^{-1.24{\cdot}e^{-0.11t}}(r^{2}=0.66)$, $TWt=1.8e^{-2.03{\cdot}e^{-0.11t}}(r^{2}=0.66)$ and $SWt=1.8e^{-5.41{\cdot}e^{-0.13t}}(r^{2}=0.83)$ respectively. Yolk length, yolk height and yolk volume of rainbow trout decreased linearly. The relative growth of total weight-total length, somatic weight-total length, yolk length-total length, yolk height-total length, yolk volume-total length, yolk weight-total length, yolk weight-total weight, yolk weight-yolk height and yolk weight-yolk length at yolk absorption period revealed the pattern of yolk absorption in rainbow trout.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.185-194
• /
• 2007

WiBro has become intentionally standardize as IEEE 802.16e. This WiBro service has been started by a portable internet at home as well as abroad. In this paper, an offender hacker do not direct attack on system on system that It marched an attack directly in damage system because a place oneself in mobile station of portable internet WiBro and avoid to attack hacker's system. At this time, a mobile make use of network inspection policy for back-tracking based on log data. Used network log audit, and presented TCP/IP bases at log bases as used algorithm, the SWT technique that used Thumbprint Algorithm. Timing based Algorithm, TCP Sequence number. Study of this paper applies algorithm to have been progressed more that have a speed to be fast so that is physical logical complexity of configuration of present Internet network supplements a large disadvantage, and confirm an effective back-tracking system. result of research of this paper contribute to realize a back-tracking technique in ubiquitous in WiBro internet network.

• Smart Structures and Systems
• /
• v.30 no.1
• /
• pp.75-88
• /
• 2022

Engineering structures in operation essentially belong to time-varying or nonlinear structures and the resultant response signals are usually non-stationary. For such time-varying structures, it is of great importance to extract time-dependent dynamic parameters from non-stationary response signals, which benefits structural health monitoring, safety assessment and vibration control. However, various traditional signal processing methods are unable to extract the embedded meaningful information. As a newly developed technique, variational mode decomposition (VMD) shows its superiority on signal decomposition, however, it still suffers two main problems. The foremost problem is that the number of modal components is required to be defined in advance. Another problem needs to be addressed is that VMD cannot effectively separate non-stationary signals composed of closely spaced or overlapped modes. As such, a new method named generalized adaptive variational modal decomposition (GAVMD) is proposed. In this new method, the number of component signals is adaptively estimated by an index of mean frequency, while the generalized demodulation algorithm is introduced to yield a generalized VMD that can decompose mode overlapped signals successfully. After that, synchrosqueezing wavelet transform (SWT) is applied to extract instantaneous frequencies (IFs) of the decomposed mono-component signals. To verify the validity and accuracy of the proposed method, three numerical examples and a steel cable with time-varying tension force are investigated. The results demonstrate that the proposed GAVMD method can decompose the multi-component signal with overlapped modes well and its combination with SWT enables a successful IF extraction of each individual component.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.111-113
• /
• 2005

In this paper a computer program has been developed using IT technologies for load flow analysis. The program is written in the Java language for the platform and operating system independence. The software technique, such as Standard Widget Toolkit (SWT), Graphical Editing Framework (GEF), and Java web start, are used for the program. The program also has Graphical User Interface (GUI) to enable users to construct power system displays through simple mouse clicks and map directly into visual power system elements on the screen. The input data of the elements of power system can be entered on the screen. The results of the program cail be checked on the screen.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.11
• /
• pp.1225-1232
• /
• 2009

This study suggests a structural design process for the upper control arm installed at a vehicle. Static strength and durability are the most important responses in the structural design of a control arm. This study considers the static strength in the optimization process. The inertia relief method for FE analysis is utilized to simulate the static loading conditions. According to the classification of structural optimization, the structural design of a control arm is included in the category of shape optimization. In this study, the metamodel technique using the kriging method is adopted to obtain the minimum weight satisfying the strength constraint. Then, the final design is suggested by considering the durability criteria. The durability assessment is obtained by the index of fatigue durability called the SWT (Smith-Watson-Topper) index. The final optimum shape has been proposed by trial and error method.

• Journal of Magnetics
• /
• v.17 no.1
• /
• pp.33-35
• /
• 2012

A magnetic brake system was fabricated for use with small wind turbines. The torque of the pivot did not change as the speed of revolution increased when the magnetic array disc was far from the salient of the aluminum housing, the torque abruptly increased as the magnetic array approached the salient of the aluminum housing. The torque increased as a quadratic function of the speed of revolution when the distance between the magnetic array and the datum point was 60 mm.