• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.43-47
• /
• 2016

대전 관평천 유역의 도시계획에 의해 개발된 도시지역을 대상으로 우수 관거 최종 유출부에 설치한 모니터링시스템을 이용하여 복수의 강우사상에 대해 연속으로 유출량 자료를 획득하였다. 본 연구는 연속적으로 획득한 유출량 자료를 바탕으로 SWMM(storm water management model)을 보정하고 최적의 수문학적 매개변수를 산정하는데 있다. SWMM의 수문학적 매개변수는 기본 침투식인 Curve Number, Horton 및 Green-Ampt를 바탕으로 각각의 경우에 맞는 유역의 조도계수 및 저류 깊이를 산정하였다. 현재 도시 개발에 따른 유출변화를 모의하는데 있어 국외에서 연구된 매개변수를 적용하고 있다. 번 연구에서 구한 매개변수는 향후 도시개발에 따른 유출 변화를 SWMM을 이용하여 분석하기 위한 기초자료를 활용 할 수 있을 것으로 판단된다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.1-11
• /
• 2010

This study proposed the method for the SWMM data generation connected with the spatial database and designed the data model in order to display flooding information such as the runoff sewer system, flooding areas and depth. A variety of data, including UIS, documents related to the disasters, and rainfall data are used to generate the attributes for flooding analysis areas. The spatial data is constructed by the ArcSDE and Oracle DB. The prototype system is also developed to display the runoff areas based on the GIS using the ArcGIS ArcObjects and spatial DB. The results will be applied to the flooding analysis based on the SWMM.

• Water for future
• /
• v.26 no.3
• /
• pp.125-135
• /
• 1993

This study was conducted for two purposes. The first was the selection of the proper model for the urban runoff, and NPS(non-point source) loads and the second was the adjustment of the selected model through the calibration and the verification of the observed data on an urban drainage basin. The selected model for this study was the Storm Water Management Model(SWMM) developed and maintained by the US Environmental Protection Agency(EPA). In particular, the Runoff Block for the surface discharge and the Transport Block for the flow routing was used. The study basin is Youngdu basin, which is a typical developed urban drainage basin. The four rainfall events for the runoff and the two for the four NPS pollutants(SS, BOD, COD and TN) were used for the calibration and the estimation of the model parameters. This study performed the calibration with regard to the peak discharge, the time to peak discharge, the volume and the relative error for three items. It was shown that SWMM can successfully be used for the prediction of the runoff and the NPS pollutants discharge. The result of this study can be used as the basis for the analysis of the correlation between the runoff and the NPS pollutants discharges, and the analysis of the mass balance with the monthly and annual NPS loads in an urban drainage basin.

• Journal of Korea Water Resources Association
• /
• v.48 no.2
• /
• pp.105-114
• /
• 2015

In the case of rapidly developed urban and industrial complex, the most area becomes impervious, which causes the increasing runoff and high probability of flooding. SWMM model has been widely used to calculate stormwater runoff in urban areas, however, the model is limited to interpreting the actual natural phenomenon. It has the uncertainty in the model structure, so it is difficult to calculate the accurate runoff from the urban basin. In this study, the model parameters were investigated and uncertainty was quantified using Uncertainty Quantification Index (UQI). As a result, pipe roughness coefficient has the largest total uncertainty and largest effect on the total runoff. Therefore, when the stormwater pipe network is designed, pipe roughness coefficient has to be calibrated accurately. The quantified uncertainty should be considered in the runoff calculation. It is recommended to understand the characteristics of each parameter for the prevention and mitigation of urban flood.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.373-381
• /
• 2012

An automatic flow and water quality monitoring system was applied to estimate pollutant loads to an urban stream during storm events in DTV (Daeduk Techno Valley), Daejeon, Korea. The monitoring system consists of rainfall gage, ultrasonic water level meter, water quality sensors for DO, temperature, pH, conductivity, turbidity and automatic water sampler for further laboratory analysis. All data are transmitted through on-line system and the monitoring system is designed to be controlled manually in the field and remotely from laboratory computer. Flow rates were verified with field measurements during storm events and showed good agreements. Automatic sampler was used to collect real time samples and analyzed for BOD, COD, TN, TP, SS and other pollutant concentrations in the laboratory. SWMM (Storm Water Management Model) urban watershed model was applied and calibrated using the observed flow and water quality data for the study area. While flow modeling results showed good agreement for all events, water quality modeling results showed variable levels of agreement. These results indicate that current options in the SWMM model to predict pollutant build up and wash-off effects are not sufficient to satisfy modeling of all the rainfall events under study and thus need further modification. This study showed the automatic monitoring system can be used to provide data to assist further refinement of modeling accuracy. This automatic stormwater monitoring and modeling system can be used to develop basin scale water quality management strategies of urban streams in storm events.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.218-218
• /
• 2017

Urbanization increases impervious area and decreases the water quantity infiltrating into soil layers. This leads to lack of ground water, it could be possibly problematic for agricultural water for crop growth in lower basins, reducing not only ground water but also streamflow quantities. One such approach to minimize the impact of urbanization is to apply low impact developments (LIDs). LIDs are to decrease the percentage of impervious area so that infiltration rate is increased, there is a need to simulate the LIDs prior to the construction. LIDs in Storm Water Management Model (SWMM) are limited to be seven types, however it is often required to simulate LIDs more than seven types. Therefore an approach to apply eleven LIDs is provided in the study, updating the model parameters. A scenario containing eleven LIDs was given by the environmental decision makers, the effect of LIDs were simulated with the expected annual costs considering establishment and maintenance costs.

• Journal of Environmental Science International
• /
• v.14 no.12
• /
• pp.1185-1194
• /
• 2005

The runoff characteristics of non-point source pollutions in the municipal area of Jeonju were investigated and analyzed by using the SWMM (Storm Water Management Model). The flow rates and water qualities of runoff from two types of drainage conduits were measured respectively. One was a conventional combined sewer system and the other was a separated sewer system constructed recently From August to November in 2004, investigations on two rainfall events were performed and flow rate, pH, BOD, COD, SS, T-N and T-P were measured. These data were also used for model calibration. On the basis of the measured data and the simulation results by SWMM, it is reported that $80-90\%$ of pollution load is discharged in the early-stage storm runoff. Therefore, initial 10-30 mm of rainfall should be controlled effectively for the optimal treatment of non-point source pollution in urban area. Also, it was shown that the SWMM model was suitable for the management of non-point source pollution in the urban area and for the analysis of runoff characteristics of pollutant loads.

• Journal of Korea Water Resources Association
• /
• v.43 no.10
• /
• pp.893-909
• /
• 2010

The purpose of this study is to consider the interaction between surface water and groundwater in basin scale by developing TANK_GS model. The soil moisture structure of tank model with 3 tanks is improved to simulate the appropriate stream-aquifer interactions. Maximum likelihood method is applied to calibrate parameters with variance functions to deal with heteroscedasticity of residuals. The parameters of improved TANK_GS model and variance function are simultaneously estimated by Simulated Annealing method, a global optimization technique. The results of TANK-GE are compared to those of the SWMM-GE model which had been developed to consider the stream-aquifer interactions. The new TANK_GS model and SWMM-GE model are applied to Gapcheon basin, which belongs to Geum River basin. TANK_GS model showed better model performance compared to the original TANK model and characterized the relationship of stream-aquifer interactions as satisfactorily as the SWMM-GE model. The sustainable groundwater yield can be estimated for the regional water resources planning using the TANK_GS model

• Journal of Korea Water Resources Association
• /
• v.52 no.6
• /
• pp.411-420
• /
• 2019

The objective of this study is to evaluate the appropriateness of methodology for designing urban sewer system using a rational method-based model, Makesw and an urban runoff model, SWMM. The Gunja basin was selected as a study area and precipitation, runoff, vegetation, soil, imperviousness data were used to estimate floods. The appropriateness of methodology was evaluated based on comparison analysis between floods estimated from Makesw and SWMM. The comparison analysis was conducted between floods estimated from Makesw and SWMM, which were simulated using design rainfall and measured rainfall from past inundation events. The comparison results showed that in the case of design rainfall, the rational method-based floods were larger than that based on SWMM in all main lines. However in several branch lines, the rational method-based floods were smaller than thoes based on SWMM. In addition, for the case of measured rainfall from past inundation events, it was easily to find the main and branch lines where the rational method-based floods were smaller than SWMM based ones. Especially, the lines where rational method-based floods were underestimated, were mostly main, $1^{st}$, $2^{nd}$ lines. It was concluded that the rational method-based results were not conservative. Based on rational method (steady flow analysis) and SWMM (unsteady flow analysis), the more conservative results the method provides, the more highly it is recommended to use in designing an urban sewer system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1106-1110
• /
• 2008

침투 트렌치, 투수성 포장, 지하수 양수 등의 모형화가 가능하도록 SWMM 4.4H 버전을 수정하여 개발된 SWMM-GE(Storm Water Management Model-Groundwater Enhanced)는 DOS 버전으로 개발되어 입력과정이 불편하고 출력결과를 다른 그림 소프트웨어로 도시하여 분석하는데 시간이 오래 걸린다. 즉, 사용자 편의환경이 구성되어 있지 않다. 이런 문제를 개선하기 위해 DOS 버전 SWMM-GE의 Windows 버전 사용자 편의환경을 개발 하였다. 먼저 전체 레이아웃을 개발하고 그 틀 아래서 RUNOFF 블록의 전 후 처리 모듈과 실행 모듈을 개발하였다. 레이아웃은 Project, Layers, Map View, Properties, Overview로 구성되었다. 그리고 남가좌 1 유역을 대상으로 개발된 편의환경을 사용하여 입력자료를 구축하고 수행하였다. 개발된 RUNOFF 블록의 사용자 편의환경은 기술자들의 프로그램 접근성과 활용성을 높일 수 있다.