• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.546-547
• /
• 2005

This study aims to evaluate the properties and the performance of the newly designed disconnector for surge arrester. This disconnector was verified with the performance in long-duration current impulse test and high current impulse test. And time-current characteristic test was done at 20A, 200A and 800A(3points) for simulating the internal fault condition of the arrester. The results of this test was very good. Consequently, the newly designed disconnector was, evaluated that it is possible to be used for surge arrester in distribution line system.

• Journal of Korean Society for Quality Management
• /
• v.24 no.2
• /
• pp.25-43
• /
• 1996

This paper presents the optimal and practical constant-stress accelerated life test plans for the lognormal lifetime distribution tinder assumptions of intermittent inspection and Type-I censoring. In an optimal plan, the low stress level and the proportions of test units allocated at each stress are determined under given inspection scheme and number of inspections such that the asymptotic variance of the maximum likelihood estimator of a certain quantile at use condition is minimized. Although the practical plan adopts the same design criterion, it involves three rather than two overstress levels in order to compromise the practical deficiencies of the optimal plan. Computational experiments are conducted to choose an allocation plan and a inspection scheme of the practical plan and to compare with test plans over a range of parameter values.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.5775-5781
• /
• 2013

Background: The gastroenteropancreatic neuroendocrine neoplasm (GEP-NEN) is the most common type of neuroendocrine neoplasm. We summarized data in our centre to investigate the clinicopathological features, diagnostic methods, therapeutic approaches and prognosis for this neoplasm to increase knowledge of this disease in Asian populations. Method: A total of 122 patients treated at Sun Yet-san Memorial Hospital of Sun Yat-sen University between January 2000 and December 2011 were analyzed retrospectively. Results: Pancreas was the most common site of involvement (65/122, 53.3%); this disease has no special symptoms; positive rates of chromogranin A (CgA) and synaptophysin (Syn) were 81.1% and 87.7%, respectively. The positive rate of Syn had statistical difference among the three grades, but not CgA. Some 68 patients had G1 tumors, 32 G2 tumors and 22 G3 tumors, and Chi-square test showed that higher grading was correlated with worse prognosis (${\chi}^2=32.825$, P=0.0001). A total of 32 patients presented with distant metastasis, and 8 cases emerged during following up. Cox proportional hazards regression modeling showed that the tumor grade (P=0.01), lymphatic metastasis (P=0.025) and distant metastasis (P=0.031) were predictors of unfavorable prognosis. The overall 5-year survival rate was 39.6%, the 5-year survival rate of G1 was 55.7%, and the G2 and G3 were 34.2% and 0%, respectively. Conclusions: The incidence of gastroenteropancreatic neuroendocrine tumors has risen over the last 12 years. All grades of these diseases metastasize readily, and further research regarding the treatment of patients after radical surgery is needed to prolong disease-free survival.

• Korean Journal of Radiology
• /
• v.22 no.6
• /
• pp.959-969
• /
• 2021

Objective: This study aimed to evaluate the role of preoperative two-dimensional (2D) shear wave elastography (SWE) in assessing the stages of liver fibrosis in patients with suspected biliary atresia (BA) and compared its diagnostic performance with those of serum fibrosis biomarkers. Materials and Methods: This study was approved by the ethical committee, and written informed parental consent was obtained. Two hundred and sixteen patients were prospectively enrolled between January 2012 and October 2018. The 2D SWE measurements of 69 patients have been previously reported. 2D SWE measurements, serum fibrosis biomarkers, including fibrotic markers and biochemical test results, and liver histology parameters were obtained. 2D SWE values, serum biomarkers including, aspartate aminotransferase to platelet ratio index (APRi), and other serum fibrotic markers were correlated with the stages of liver fibrosis by METAVIR. Receiver operating characteristic (ROC) curves and area under the ROC (AUROC) curve analyses were used. Results: The correlation coefficient of 2D SWE value in correlation with the stages of liver fibrosis was 0.789 (p < 0.001). The cut-off values of 2D SWE were calculated as 9.1 kPa for F1, 11.6 kPa for F2, 13.0 kPa for F3, and 15.7 kPa for F4. The AUROCs of 2D SWE in the determination of the stages of liver fibrosis ranged from 0.869 to 0.941. The sensitivity and negative predictive value of 2D SWE in the diagnosis of ≥ F3 was 93.4% and 96.0%, respectively. The diagnostic performance of 2D SWE was superior to that of APRi and other serum fibrotic markers in predicting severe fibrosis and cirrhosis (all p < 0.005) and other serum biomarkers. Multivariate analysis showed that the 2D SWE value was the only statistically significant parameter for predicting liver fibrosis. Conclusion: 2D SWE is a more effective non-invasive tool for predicting the stage of liver fibrosis in patients with suspected BA, compared with serum fibrosis biomarkers.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.3
• /
• pp.49-58
• /
• 2017

PURPOSE: To summarize the evaluation tools of balance [Berg Balance Scale (BBS), timed up and Go (TUG), forward reaching test (FRT)], gait [6 m walking Test (6MWT)], and strength [Chair Stand Test (CST)] for patients with dementia. METHODS: The following databases were searched: Pub MED, Cochrane, Sciences Direct, and Web of Sciences. The inclusion criteria were as follows: 1) repeated measurement design, 2) subjects with dementia, 3) use of testing tools such as the BBS, TUG, FRT, 6MWT, and CST, 4) report the reliability. One reviewer performed the quality assessment of diagnostic accuracy study and two evaluators performed data extraction independently. RESULTS: Six articles and one letter were included. The interrater reliability of 6MWT, TUG, and CST, were acceptable (ICC>.90). However, FRT had unacceptable reliability. In test-retest reliability, only BBS has acceptable reliability (ICC>.90). Others had various reliabilities. The risk of interrater reliability bias was low in all studies. However, the risk of bias of intrarater reliability was low in five studies and moderate in two studies. CONCLUSION: The interrater reliability of the 6MWT, TUG, and CST were acceptable. However, in test-retest reliability, only BBS has acceptable reliability. Therefore, we suggest the use of BBS to test the balance of dementia patients. In addition, the study of tool reliability according to the subtype of dementia is needed in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.75-81
• /
• 2005

Jettison, grid and CTS test are widely used for the store and stage separation studies. This is an introductory paper on the experimental methodology and typical results of grid and CTS test used for the Korean 3-stage sounding rocket development. Thirteen separation trajectories were evaluated in the ONERA S2MA wind tunnel at Mach numbers of 2.0 and 2.8. The test result was applied as the basic database for the design of optimized separation device.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.347-354
• /
• 2008

In order to enhance the productivity of mobile and develop reliable software, the test of mobile application software should be required absolutely. The most important way to communicate to users has been used to GUI. But GUI test method in mobile has no the test automation system except manual test by checklist. In this paper we present a test method and tool by image flow to reduce the time required and finds out errors to GUI, by carrying out the study on automatic GUI testing tool based on image flow to GUI test of mobile application.

• International Journal of Aeronautical and Space Sciences
• /
• v.3 no.2
• /
• pp.59-66
• /
• 2002

A vertical test stand based on launcher propulsion system was constructed and several tests for the determination of cyclogram were carried out. To make an accurate estimation, static and dynamic pressures were measured and analyzed. Especially, static pressure measurements using fast response sensors without extension tubes were used to determine operation sequence more evidently. The standard operation times of final valves were determined in cold flow tests with an engine head, and fire formation time in combustion chamber was checked in an ignition test with an ignitor only. On the basis of these tests, ignition sequence was established and combustion test cyclogram was finally determined. According to combustion test, test results were well matched with the determined cyclogram within 0.05 sec.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1171-1174
• /
• 2004

Leakage current of the polymer arrester(42kV, 10kA, Class3) for railroad line applied actually field was observed and electrical characteristics of arrester before and after applied actually field were investigated. During applied actually field, leakage current of arresters were $610{\sim}647{\mu}A$ in AN SAN line and $500{\mu}A$ in YUNG DONG line. After applied actually field, electrical characteristics of arrester, such as insulation test, reference voltage test, leakage current test and partial discharge current test, wasn't variation as before applied actually field.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.265-268
• /
• 2000

In this study, a small punch creep (SP-Creep) test using miniaturized specimen has been described for the development of the new creep test method for high temperature structural components such as headers and tubes of boiler, turbine casing and rotor, and reactor vessel. The SP-Creep testing technique has been applied to 1Cr-0.5Mo steel used widely as boiler header material and the creep test temperature are varied at $550^{\circ}C{\sim}600^{\circ}C$. From the experimental results, e.g. SP-Creep curve behaviors, the creep rate in steady state and creep rupture life with test temperature and load, the load exponential value(n, m), the activation energy($Q_{spc}$), the Monkman-Grant relation and the creep life assessment equation etc., it can be summarized that the SP-Creep test may be a useful test method to evaluate the creep properties of the heat resisting material such as boiler header.