• Journal of Science and Technology Studies
• /
• v.12 no.2
• /
• pp.185-204
• /
• 2012

This paper will analyze the development and management processes of the STS (Science and Technology Studies) course in the Division of Performative Humanities at College of Humanities, Hanyang University. The STS Course is one of the five integrated courses in Performative Humanities which are recommended for Humanities students as second major options. The Performative Humanities courses were established through support from the Ministry of Education, Science and Technology between 2005 and 2009. Then, these courses were integrated as the independent "Division of Performative Humanities", whose courses are being taught today. Among these courses, the STS course is a compositive course which is based on STS and links humanities, science and technology. The establishment of the STS course symbolizes a new integrative approach to interdisciplinary education both in terms of its contents and operation processes. This paper will discuss the roadmap of the STS course and how to manage its education system. The advantages and disadvantages of the course's development process and the result of its management procedures will also be analyzed. With the importance of integrated education being recognized, this paper will analyze how the interdisciplinary STS course is incorporated and operated as a major course in the University. This will enable readers to seek ideas for alternative integrated education models that can be applied in Korea's university system.

• Korean Journal of Food Science and Technology
• /
• v.52 no.3
• /
• pp.304-309
• /
• 2020

Different types of storage containers, such as polypropylene (PP), stainless steel (STS), and ceramic were used for kimchi storage at 0℃ in a refrigerator, and the characteristics were compared for 32 days. The pH of kimchi samples in PP and STS containers reached 4.59 and 4.53, respectively at day 16, while a pH of 4.92 could be observed in ceramic containers. This trend persisted until day 32. Titratable acidities of the PP and STS container contents reached 0.83 and 0.82%, respectively, on day 16, while it reached 0.73% in the case of the ceramic container contents. The viable cell counts of lactic acid bacteria in kimchi samples in PP, STS, and ceramic containers fluctuated and finally reached 4.87, 5.44, and 5.35 Log CFU/g, respectively. Weissella koreensis occupied a large portion of the kimchi sample of the ceramic container on day 20 based on the metagenomic analysis. Taken together, ceramic container might be desirable for the storage of kimchi in low temperature refrigerators.

• 한국해양학회지
• /
• v.5 no.1
• /
• pp.30-36
• /
• 1970

The water quality of the laver bed at Yongwon Ri, Changwon Gun was investigated during the spring and neap tide in March 1970. The effect of tide on the contents of various chemical constituents was irregular and the variation ranges of the contents were narrow. The pH value during flood and ebb tide was a constant of 8.2. The chlorosity range varied from 19.15 to 19.33g/l, the difference of 0.18g/l being comparatively small for coastal waters. The nutrient salts contents varied irregulary with the change in tide, but nitrite and soluble iron were not detected. In local distribution, chlorosity and silicate- silicon contents were found to be more at Sts. 1, 2 and 3 in the eastern area than at Sts. 4, 5 and 6 in the western area, wheras nitrate and ammonia contents were found to be more at Sts. 4, 5 and 6. The nitrate content was especially high, being twice as much as that at Sts. 1, 2 and 3 in the eastern area. In the spring tide, chlorosity was found, on the average, to be as much as 0.06g/l higher than in the neap tide, but the contents of nutrient salts were higher in the neap tide, especially the nitrate content was twice as much. When compared with other selected local laver beds, i.e., the tidal flats of the Nackdong and Somjin rivers, and of Wan Do Gun, the chlorosity level was highest but the nutrient salts contents level was, in general, slightly lower and the variation ranges narrow in the laver bed at Yongwon ri. The nitrate content, in particular was one tenth smaller than the others.

• Journal of The Korean Association For Science Education
• /
• v.25 no.3
• /
• pp.327-335
• /
• 2005

This study investigates student achievement and science-related attitudes on STS hypothetical deductive instruction strategy in the water section of high school chemistry. Two 11th grade co-ed high school classes participated in the study; one control group and one treatment group. After being taught for 10 class periods during the second semester. ANCOVA analysis revealled no significant difference (p>.05) between two groups' achievement tests. However, analysis by ANCOVA did show that the scores for science-related attitudes in the treatment group were significantly higher than those of the control group (p<.05). In particular, the scores of science learning contents and science value about science-related attitude were significantly higher in the treatment group.

• Journal of Welding and Joining
• /
• v.34 no.2
• /
• pp.46-53
• /
• 2016

Effect of heating rate on microstructure of brazed joints with STS 304 Printed Circuit Heat Exchanger (PCHE),which was manufactured as large-scale($1170(L){\times}520(W)){\times}100(T)$, mm), have been studied to compare bonding phenomenon. The specimens using MBF 20 was bonded at $1080^{\circ}C$ for 1hr with $0.38^{\circ}C/min$ and $20^{\circ}C/min$ heating rate, respectively. In case of a heating rate of $20^{\circ}C/min$, overflow of filler metal was observed at the edge of a brazed joints showing the height of filler metal was decreased from $100{\mu}m$ to $68{\mu}m$. At the center of the joints, CrB and high Ni contents of ${\gamma}$-Ni was existed. For the joints brazed at a heating rate of $0.38^{\circ}C/min$, the height of filler was decreased from $100{\mu}m$ to $86{\mu}m$ showing the overflow of filler was not appeared. At the center of the joints, only ${\gamma}$-Ni was detected gradating the Ni contents from center. This phenomenon was driven from a diffusion amount of Boron in filler metal. With a fast heating rate $20^{\circ}C/min$, diffusion amount of B was so small that liquid state of filler metal and base metal were reacted. But, for a slow heating rate $0.38^{\circ}C/min$, solid state of filler metal due to low diffusion amount of B reacted with base metal as a solid diffusion bonding.

• Proceedings of the Zoological Society Korea Conference
• /
• 1998.10b
• /
• pp.374.1-374
• /
• 1998

No Abstract, See Full Text

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.341-348
• /
• 2001

The effect of initial ${\alpha}^{\prime}$ in STS 304 Stainless Steel on fatigue resistance, and fatigue crack propagation behavior was studied with using C-T specimens. Higher ${\Delta}K_{th}$ was observed in the specimens with the content of 0% initial ${\alpha}^{\prime}$ than in the contents of 2% and 33% initial ${\alpha}^{\prime}$. The difference of da/dN at the same level of ${\Delta}K$ was distinctive in low and intermediate level of ${\Delta}K$ however became less different as the level of ${\Delta}K$ increased. It is because the formation of strain induced martensite occurred readily in lower ${\alpha}^{\prime}$ at the vicinity of the fatigue crack tip, which causes compressive residual stresses resulting in the enhancement of crack closure. In general fatigue cracks propagated transgranular mode and many segments of ridges were observed on the fracture surfaces. At the higher contents of initial ${\alpha}^{\prime}$ appeared the smaller size of ridge segments. Slips in austenite were blocked more frequently by the martensite colonies formed in austenite.

• International Journal of Contents
• /
• v.16 no.3
• /
• pp.45-50
• /
• 2020

Occupational therapists (OTs) interface patients much longer than other healthcare workers and, thus, are likely to experience a high level of stress because of work, physical fatigue, lack of professional knowledge and skills, and problematic relationships with patients, etc. This study examined the quality of the lives of OTs and the workplace which is an influential factor. This study recruited 200 OTs and used a professional quality of life scale. We found that, only 27.0% experience high levels of compassion satisfaction (CS) and 80.5% and 74.5% experience high or average levels of burnout (BO) and secondary traumatic stress (STS) of compassion fatigue (CF), respectively. We discovered that CS was higher in temporary employees; and CF was higher in females, subjects in their 30s; and those working at general hospitals. Also, BO was higher in those with one to five years of clinical experience and regular employees. Last, STS was higher in the group without stable income. This study verified that clinical experience is a critical factor that reduces BO, and excessive workload outside of treatment lowers the professional quality of life. This suggests that work environment and regulations related to OTs must be improved to increase CS and reduce CF.

• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.133-140
• /
• 2015

The aim of this study was to investigate the bacteriophage removal in various clay minerals and clay-amended soils. Batch experiments in kaolinite, montmorillonite, and bentonite showed that kaolinite was far more effective at the MS2 removal than montmorillonite and bentonite. In kaolinite, the log removal increased from 0.046 to 2.18, with an increase in the adsorbent dose from 0.3 to $50g\;L^{-1}$, whereas the log removals in montmorillonite and bentonite increased from 0.007 to 0.40 and from 0.012 to 0.59, respectively. The MS2 removal in kaolinite-amended silt loam soils was examined at three different soil-to-solution (STS) ratios. Results indicated that the log removal of MS2 increased with an increase in the kaolinite content and the STS ratio. At the STS ratio of 1:10, the log removal of MS2 increased from 2.33 to 2.80 with an increase in the kaolinite content from 0% to 10% in kaolinite-amended soils. The log removals of MS2 at the STS ratios of 1:2 and 1:1 increased from 2.84 to 3.47 and from 3.46 to 4.76, respectively, with an increase in the kaolinite content from 0% to 10%. Results also indicated that the log removals of PhiX174 and $Q{\beta}$ in kaolinite-amended soils were similar to each other, but they were far lower than those of MS2 at all the kaolinite contents. The log removal of PhiX174 increased from 0.16 to 0.32, whereas the log removal of $Q{\beta}$ changed from 0.17 to 0.22 with an increase in the kaolinite content from 0% to 10%.

• Journal of Korean Elementary Science Education
• /
• v.27 no.1
• /
• pp.75-82
• /
• 2008

The purpose of this study was to examine the consistency and balance of learning objectives of units and instructional units according to grades and educational domains. Educational domains were cognitive(scientific knowledge), scientific inquiry(inquiry process skills), affective(scientific attitude), and science-technology-society(STS). Learning objectives of life field of the 7th elementary science curricular teaching guidebooks were analysed. Scientific inquiry process skill objectives(43.5%) were most dominant in units, but cognitive objectives(53.9%) were most dominant in instructional units. STS objectives were most recessive in both units and instructional units. Especially, objectives of units and instructional units were shown no consistency by grade. The results of this study suggested that the textbooks and teaching guidebooks should be developed consistently by considering learning activities and contents on the basis of background and properties of science curriculum.