• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.82-87
• /
• 2007

New porous separators based on non-polyolefin materials including the blend of poly (vinyl chloride) (PVC)/poly (vinylidene fluoride-co-hexafluoropropylene) (P(VdF-co-HFP)/poly(methyl methacrylate) (PMMA), and the porous separator based on poly (vinylidene fluoride) (PVdF) were prepared by phase inversion method. The porosity and morphology were controlled with phase inversion rate, which is governed by the relative content of non-solvent and solvent in coagulation bath. To enhance tensile strength, the solvent pre-evaporation and uni-axial stretching processes were applied. The ionic conductivity was increased with increasing stretching ratio, and tensile strength was increased with increasing solvent pre-evaporation time and stretching ratio. The 200% stretched PVdF separator showed 56 MPa of tensile strength, and the ionic conductivity of the stretched PVdF separator was $8.6{\times}10^{-4}\;S\;cm^{-1}\;at\;25^{\circ}C$.

• Journal of the Korean Society of Costume
• /
• v.58 no.1
• /
• pp.1-8
• /
• 2008

The purpose of this study was to investigate the mechanical properties and hand values of polypropylene knit and to analyze its color-fastness for light, laundering and abrasion, comparing to nylon and polyester knits. The results of this study were as follows: 1. Polypropylene stretched more with less force than nylon and polyester and its elastic recovery and shape stability were better than nylon and polyester. 2. Polypropylene was more flexible than nylon and polyester. 3. Polypropylene stretched more easily for shearing but its recovery from shearing was less than nylon and polyester. 4. Polyester had smoother surface than nylon and polyester. 5. Polypropylene was compressed more easily than polyester with less force but less than nylon. Its recovery from compression was more than nylon and polyester. 6. Polypropylene had lower KOSHI and SHARI values and higher FUKURAMI value than nylon and polyester. It had better T.H.V. value than nylon but less than! polyester. 7. Color fastness of polypropylene for lanudering, light, and abrasion in wet and dry conditions was good except polypropylene dyed with red color.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.976-981
• /
• 1986

The Stress analysis based on the large deflection theory of plate for the large cylindrical storage tank is performed by considering the change of membrane force for the various parameter, i.e., thickness ratio, tank height to diameter ratio, and stretched length. The critical buckling force of cylindrical shell is obtained to investigate the safety of tank shell. By numerical result, the thickness ratio is the important parameter for the membrane force, the height of tank is related linearly with the force, and the stretched length of bottom plate is little influenced. Also, the critical buckling force of cylindrical shell is large than the edge shear force at bottom-shell junction, and hence the consideration of the shell buckling is not required.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.654-654
• /
• 2013

One of the most important yet unresolved problems in molecular electronics is the controversy over the number and nature of multiple conductance peaks in single-molecule junctions. Currently, there are three competing explanations of this observation: (1) manifestation of different molecule-electrode contact geometries, (2) formation of gauche defects within the molecular core, (3) involvement of different electrode surface orientations [1]. However, the exact origin of multiple conductance peaks is not yet fully understood, which indicates our incomplete understanding of the scientifically as well as techno-logically important organic-metal contacts. To theoretically resolve this problem, we previously applied a multiscale computational approach that combines force fields molecular dynamics (FF MD), density functional theory (DFT), and matrix Green's function (MGF) calculations [2] to a thermally fluctuating haxanedithiol (C6DT) molecule stretched between flat Au(111) electrodes, but could observe only a single conductance peak [3]. In this presentation, using DFT geometry optimizations and MGF calculations, we consider molecular junctions with more realistic molecule-metal contact conformations and Au(111) electrode surface directions. We also conduct DFT-based molecular dynamics for the highly stretched junction models to confirm our conclusion. We conclude that the S-Au coordination number should be the more dominant factor than the electrode surface orientation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.16-22
• /
• 2009

In this paper, we propose an auto gain/offset which considers the visibility of human visual system (HVS) and the histogram of a target image jointly. In the proposed method, the lower and upper clipping thresholds are determined to maximize the averaged visibility of the contrast-stretched image. The target image is then contrast-stitched by the gain and offset derived from the clipping thresholds. We define the visibility as a quantity related to the spatial JND, which means the threshold below which any change of a pixel from its textured neighbors is not recognized by the HVS. Experimental results show that the contrast-stretched images by the proposed method have better global and local contrasts compared to the results by some conventional methods.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.11 no.2
• /
• pp.62-66
• /
• 2015

Temporomandibular joint dislocation causes considerable pain, discomfort, and swelling. The anatomic construction of the articular fossa and the eminentia articularis may predispose to dislocation, and weakness of the connective tissue forming the capsule is believed to be a predisposing factor. The capsule may be stretched and, more rarely, torn. Dislocation may be unilateral or bilateral and may occur spontaneously after stretching of the mouth to its extreme open position, such as during a yawn or during a routine dental operation. Manual reduction with the patient under muscle-relaxing condition or anesthesia is recommended method. After the reduction of an acute dislocation, immobilization of the jaw is recommended to allow the stretched and sometimes torn capsule to heal, thus preventing recurrence. A Barton's bandage may be applied for 2 to 3 weeks to prevent the patient from opening the jaw too wide. But, it results in recurrent dislocation in the neurologically disabled patient, because of loose intermaxillary fixation. This is a case report about management of recurrent temporomandibular joint dislocation by multiple loop wirings and intermaxillary elastics in cerebrovascular accident patient.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.453-456
• /
• 2011

An experimental investigation of the heat transfer characteristics of stretched premixed flames using Synthetic gas has been performed. Hydrogen and carbon mon-oxide which could be extracted from coal gasification process are the main fuel of synthetic-gas. Heat flux at the stagnation point was increased as global strainrate was increased, then the heat flux was decreased when a global strainrate reached a sudden point. Heat flux at the stagnation point is also affected by nozzle to impingement distance. Heat flux was increased as nozzle to impingement place distance was increased. This study is a foundation study of practical use of secondary gases from coals.

• Journal of the Korean Society of Physical Medicine
• /
• v.18 no.2
• /
• pp.1-11
• /
• 2023

PURPOSE: This study examined the immediate effects of applying ankle eversion taping using kinesiology tape in chronic stroke patients-design: a randomized cross-over trial. METHODS: Seventeen stroke patients underwent three interventions in random order. The subjects were initially assigned randomly to an ankle eversion taping, placebo taping, or no taping for each intervention. Ankle eversion taping was used for mechanical correction and was involved in ankle dorsiflexion and eversion. The tape was stretched by 30-40%. Placebo tapping was applied in the same form as eversion tapping but was not stretched. The balance ability was assessed using the Y-balance test. The gait ability was assessed by maximum foot pressure and time of stance phase, and gait speed was assessed using a 10 m walk test (10MWT). All measurements were performed immediately after the intervention. RESULTS: The results showed that the dynamic balance and stance phase time in chronic stroke patients was improved after ankle eversion taping. The ankle eversion taping conditions increased significantly (p < .05) compared to the placebo and no taping conditions. CONCLUSION: The application of ankle eversion taping that uses kinesiology tape instantly increased the gait ability of chronic stroke patients. On the other hand, more research will be needed to identify the long-term effects of ankle eversion taping.

• Journal of the Korean Society of Physical Medicine
• /
• v.18 no.4
• /
• pp.77-87
• /
• 2023

PURPOSE: The purpose of this study was to investigate the changes in the flexibility and elasticity of the muscles when the hamstrings were stretched in one direction and when they were stretched in three directions. METHODS: In this study the subjects were divided into two groups, namely the 'one-direction stretching exercise of the hamstring muscle in the neutral position' group (female: 14 people, male: 14 people) and the 'three-way stretching exercise' group (female: 12 people, male: 14 people) considering the positions of the three hamstring muscles. The elasticity and flexibility of the hamstring muscles were measured before and after the self-extension exercise, and the average value of two measurements was noted. To evaluate the flexibility of the hamstring muscle, a 'sit and reach' test was performed, and muscle elasticity was measured using the MyotonPRO® device. RESULTS: After the stretching exercise, flexibility increased in both groups. In terms of muscle elasticity, the body dynamic strength and resonance frequency of the stretching one-direction stretching group decreased after the stretching exercise. CONCLUSION: To alter the muscle characteristics and increase the flexibility when performing a stretching exercise, selecting and stretching only one muscle with the lowest range of motion yields effective results. The ideal technique to be employed appears to be to stretch the entire hamstring muscle in one direction from the neutral position.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.137-146
• /
• 2008

The purpose of this study is to examine the causes of errors from EGR posture on the balance beam, which is bending flick-flack salto backward stretched national team players through kinematic analysis, and present training methods for them so as to provide scientifically useful information to coaches and athlete. Findings from this study are summarized below. The most important factors that affect the errors in boyd center position and speed change were the speed change of left and right body centers and the horizontal and vertical speed changes. The left and right acceleration changes were greater in failed posture than in successful posture. The horizontal and vertical accelerations in E3 and E5 were the key factors that affected the backward somersault and landing. The angular speed changes which varied between success and failure were notable in head and shoulder joints. In individual results. The section when the angular speeds of head and shoulder joint must be the greatest was E4. In this section, when the body is extending instantly in a bent posture, increasing the angular speeds of head, shoulder and hip joints can improve the duration of staying in the air and the rotation radius of a somersault.