• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.6
• /
• pp.29-36
• /
• 2008

This study examined the de-icing agents' stresses on Pinus strobus and Pinus thunbergii by chlorophyll fluorescence analysis. The assumption of this study was that photosynthetic efficiency was changed by de-icing agents applied onto highways in winter by altering the concentration of the de-icier, types of de-icer and leaf surface coating liquid application. The practical purpose of this study was to investigate the de-icing gents stresses on Pinus strobus by the highway area where de-icing agents were used frequently and to discover out minimizing stratages to prevent further damages. or this simulation study, a sample plot was established in Bogae-myeon, Anseong, Gyeonggi-do and Pinus strobus and Pinus thunbergii were planted for the examination in April, 2005. Five types of de-icing agents - NaCl, $CaCl_2$, T product(NS40:low cWoride de-icer type), NaCl+$CaCl_2$ and T product+$CaCl_2$ - were selected and the their concentration was altered to 0%, 5%, and 9%. Five types of de-icing agents were applied to both trees treated by a leaf surface coating liquid and trees not treated by leaf surface coating liquid. For the fluorescence analysis, the leaf surface coating liquid, which was diluted by 10 times, was sprkinkled onto the two tree species three days prior to gathering samples. Sample leaves from the two tree species were gathered at 10 o'clock in the morning of mid-August, 2006 and brought to the laboratory within three hours to be dipped in different concentrations (0%, 5%, or 9%) of the five de-icing agents for two minutes. Then the eaves were placed on the filter paper dipped in each solution on a petri dish, sealed with polyethylene film and kept in a growth chamber at $22^{\circ}C$ for 72 hours. Out of the growth chamber, the leaves were treated with a chorophyll fluorescence reaction analyzer for 30 minutes to measure the initial light acceptance rate(Fo), maximum light acceptance ate(Fv/Fm), light acceptance usage(F' q/F' m) and optical electron delivery coefficient(qP). As a result, Pinus strobus' initial light acceptance rate(Fo) decreased as T product and NaCl increased in concentration, and $Cal_2$ did not reduce much with the eaf surface coating liquid application. Maximum light acceptance rate(Fv/Fm) and light acceptance usage(F' q/F' m) decreased sharply as T product and NaCl increased in concentration and NaCl+$CaCl_2$ and T product+$CaCl_2$ did not reduce much with leaf surface coating liquid application. Optical electrons delivery coefficient (qP) decreased as T product increased in concentration on trees without the leaf surface coating liquid application and all other de-icing agents did not show much reduction. As for Pinus thunbergii, the initial light acceptance rate(Fo) decreased as T product increased in concentration, but the maximum light acceptance rate(Fv/Fm) was not reduced much by changes in concentration. light acceptance usage(F' q/F' m) decreased as NaCl increased in concentration and optical electron delivery coefficient(qP) decreased as NaCl increased in concentration in both with and without leaf surface coating liquid application. In conclusion, it was possible to plant Pinus strobus if spraying leaf surface coating liquid or cleaning deicing salt to prevent the damage caused by deicing agents was more economical than replacing the trees. If not, it was better to plant Pinus thunbergii. Another way to decrease the deicing gents stresses of landscape plants would be planting the trees further away from the roads even though it might take longer period to display its planting functions.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.1-13
• /
• 2014

As part of reconsideration on naming of the scenic site No.1 "Myeongju Cheonghak-dong Sogumgang," this study attempts to identify whether there is any mistake with reference to place naming of Korea's No.1 scenic site and if so, to correct the problem by examining the origin of the name and its transition progress through analysis and interpretation of old maps, ancient documents such as traditional geographic books, Yusangi(遊山記) and Letters Carved on the Rocks. The findings of this study are as follows: In traditional geographic books, a term of 'Mt. Cheonghak(靑鶴山)' was first found from "SinjungDonggookyeojisungram(新增東國輿地勝覽)" and after a place name, 'Sogumgang(小金剛)' first appeared in "Yeojidoseo(輿地圖書)" in the middle of the 17th century, it was reproduced in "Jungsuimyeongji(增修臨瀛誌)", which was published in the early 20th century. However, as a result of analyzing old maps, the place name, Sogumgang cannot be found in any local or national map except place names such as Cheonghak-dong, Mt. Cheonghak and Temple Cheonghak. Even though 'Biseonam,' 'Cheonyudong,' 'Gyeongdam' and 'Mt. Cheonghak' appear in Yulgok's "Yucheonghaksangi(遊靑鶴山記)", any part in which 'Sogumgang' was referred is not found. Later, Cheonghak-dong Sogumgang seemed to had been called 'Mt. Cheonghak' or 'Cheonghak-dong(靑鶴洞)' for more than three centuries as seen in Lee Sun-il's "Godamilgo(孤潭逸稿)", Heo Geun's farewell records, Heo Mok's "Cheonghak-dong Guryongyeongi(靑鶴洞九龍淵記)", Yoon Sun-geo(尹宣擧)'s "Padongilgi(巴東日記)" and Lee Won-jo's letters and a poem composed by Gang Jae-hang in the middle of the 18th century is the only record in which the place name, 'Sogumgang' is shown. Meanwhile, 'Sogumgang' carved on Inung Rock(二能巖) in front of Temple Gumgang is presumed to be carved by Inunggyeoone(二能契員) in the 1870s or in 1930s, considering the size of each character, calligraphy, overall layout, wear extent and records in Jiriji. Therefore, no evidence can be found to say that each character of 'Sogumgang' was written by Yulgok because 'Sogumgang' has strong evidences of the origin of its place name. To sum up the findings stated above, since Yulgok's "Yucheonghaksangi", this place seems to have been referred as 'Mt. Cheonghak Cheonghak-dong' and as it is confirmed that the place name, 'Sogumgang' first appeared in "Ohyeongosijo(五言古時調)" of "Ibjaeseonsangyugo(立齋先生遺稿)" and "Yeojidoseo" in the middle of the 18th century, it can be inferred that the place name, Sogumgang had been partly mingled as an another name of Mt. Cheonghak. Therefore, even though it is difficult to say the existing place name has a significant problem, it is thought that it will be better to name 'Mt. Cheonghak Cheonghak-dong' rather than 'Cheonghak-dong Sogumgang' in order to stress on this place's traditional identity as a scenic site related to Yulgok. In addition, as confirmed in this study process, it is said that each character of place names, 'Mt. Cheonghak' and 'Gyeongdam(鏡潭)' and name 'Yoon Sun-geo' carved in Rock Sikdang stated in Yoon Sun-geo's "Padongilgi" in 1964 is a pledge showing the influence of "Yucheonghaksangi" as an ancient travel literature as well as a mark of the Giho school scholars' respect and spirit to honor Yulgok.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6852-6859
• /
• 2015

The purpose of this study was to determine the growth characteristics and distribution pattern of a brackish water clam Corbicula japonica in Seomjin River. Field samples were taken from 14 stations with salinity gradients during spring. Salinity at the bottom layer ranged from 1.0 psu to 32.9 psu, with low salinities in the upper area of the river. In particular, salinity at St.11 was decreased drastically to be ca. 15.0 psu, indicating an intermediate salinity zone. The distribution pattern of C. japonica was related to the salinity gradient, with the highest densities of $2,102ind.m^{-2}$ at Station 13, followed by $1,507ind.m^{-2}$ at Station 11. Here, we focused on the growth characteristics of collected C. japonica collected at two stations with different salinity values. The relationship between shell length and total weight was highly correlated ($R^2=0.91$, P<0.001) at Station 13 compared to that at Station 11 ($R^2=0.72$, P<0.001). On the other hands, the degree of correlation between shell length and shell height (SH) or shell width (SW) at Station 11 (SH: $R^2=0.91$, P<0.001; SW: $R^2=0.69$, P<0.001) was higher than that at Station 13 (SH: $R^2=0.64$, P<0.001; SW: $R^2=0.48$, P<0.001). In addition, fatness index of C. japonica at Station 13 was significantly (P < 0.001) higher than that at St. 11 (t-test value=-22.8, p<0.001). This implies that C. japonica at Station 13 might have enhanced their somatic growth, whereas C. japonica at Station 11 might have this kind of defense mechanism their internal organization against the salinity stress. Ecologically, this kind of defense mechanism of C. japonica against salinity flucuation may play an important role in their survival strategy.

• Clinical and Experimental Pediatrics
• /
• v.48 no.2
• /
• pp.143-147
• /
• 2005

Purpose : The aim of the this study was to evaluate the effect of various perinatal conditions on TSH and thyroid hormone levels in cord blood. Methods : Cord blood samples were collected from 130 neonates immediately after birth. TSH, $T_3$, and free $T_4$ levels were measured by the radioimmunoassay(RIA) method. The effects of gestational age, sex, birth weight, delivery method, perinatal asphyxia, maternal diabetes mellitus(DM), and preeclampsia on TSH and thyroid hormone levels were assessed by ANOVA test, Student t-test, and multiple regression analysis. Results : Birth weight and sex did not affect TSH and thyroid hormone levels. TSH level increased according to gestational age(P<0.05). TSH level was $4.42{\pm}0.66{\mu}IU/mL$ in infants born vaginally, which was higher than that of cesarian section delivery($3.31{\pm}0.33{\mu}IU/mL$)(P<0.05). TSH level was $5.18{\pm}0.93{\mu}IU/mL$ in asphyxiated newborns and $2.97{\pm}0.84{\mu}IU/mL$ in non-asphyxiated newborns(P<0.05). TSH level in infants with maternal DM($8.911{\pm}1.25{\mu}IU/mL$) was higher than that of infants without maternal DM($4.32{\pm}0.42{\mu}IU/mL$)(P<0.05). TSH level was $5.28{\pm}0.42{\mu}IU/mL$ in infants with maternal preeclampsia and $3.65{\pm}0.46{\mu}IU/mL$ in infants without maternal preeclampsia(P<0.05). Thyroid hormones were lower in infants with perinatal asphyxia(P<0.05). In asphyxiated infants, $T_3$ level was $75.33{\pm}55.65ng/mL$ and free $T_4$ was $0.54{\pm}0.21ng/mL$. $T_3$ and free $T_4$ level was $109.85{\pm}41.77ng/mL$ and $0.76{\pm}0.22ng/mL$ each in infants without perinatal asphyxia. Among the perinatal factors, gestational age, 1 min Apgar score and maternal DM influenced TSH level independently. Conclusion : In our study, cord blood TSH and thyroid hormone levels were affected by perinatal stress events.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Korean Journal of Psychosomatic Medicine
• /
• v.27 no.2
• /
• pp.77-84
• /
• 2019

Objectives : The Illness Intrusiveness Rating Scale (IIRS) is a well-validated self-report instrument for assessing negative impact of chronic illness and/or adverse effects of its treatment on everyday life domains. Although extensive literature probed its psychometric properties in medical illness, little attention was paid for its validity for psychiatric population. This study aimed to test factorial structure of the Korean Version of the IIRS (IIRS-K) in a consecutive sample of psychiatric outpatients. Methods : Data set of 307 first-visit patients of psychiatric clinic at Guri Hanyang univ. Hospital were used. Exploratory and confirmatory factor analysis, internal consistency were tested in IIRS-K. We also checked Spearman's correlation analysis between IIRS-K, Zung's self-report anxiety scale and Zung's self-report depression scale. Results : 76.9% of the patients were with anxiety disorder and depressive disorder. The principal component factor analysis of the IIRS-K extracted three-factor structure accounted for 63.2% of total variance that was contextually similar to the original English version. This three-factor solution showed the best fit when tested confirmatory factor analysis compared to the original IIRS, two-factor model of IIRS-K suggested from medical outpatients, and one-factor solution. The IIRS-K also showed good internal consistency (Cronbach's α=0.90) and good convergent validity with anxiety and depression scales. Conclusions : The IIRS-K showed the three-factor structure that was similar but not identical to original version. Overall, this study proved factorial validity of the IIRS-K and it can be used for Korean clinical population.

• Journal of the Korean association of regional geographers
• /
• v.6 no.3
• /
• pp.101-115
• /
• 2000

This study aims to make a research on the secondary school education of geography and the system of teacher training in Belgium, focused on the case of Francophone Community. What has been made clear by this research can be summed up as follows. The first two years of the secondary school offer two hours of 'environment education', per week, which can be categorized into the learning of living geography, in that at this stage students learn how to observe the geographic phenomena in their daily life and pigeonhole them. The two years of the second stage of the secondary school offer one hour of 'world geography' which actually is focused on the district of Europe and Russia. The two years of the third stage of the secondary school offer an advanced course of geography which aims to teach systematically the physical geography and the human geography. A remarkable change in geographic education in Belgium is that in the wake of the Revision Act of the secondary school education, textbooks were replaced by other teaching manuals adapted to the regional condition by the teachers. This may result in a wide gap of achievements in geography according to the conditions of educational establishments. Another notable change is that the stress of geographic education tends to be placed on the ability of acquiring practical geographic knowledge rather than the geographic information itself. And it is also another marked tendency that most learning activities in geography class are conducted on the basis of student-centered and the method of investigation. Teachers of the lower secondary schools in Belgium are trained in the School of Education as multi-major teachers, such as a teacher for biology-chemistry-geography or a teacher for history-sociology-geography. Teachers of the higher secondary school education are trained in the Department of Teacher Education in universities as solo-major teachers in that they are required to know more deeply to teach an advanced course of geography in the higher secondary schools. To improve the teacher education many folds of policies are adopted. One is that many in-service teachers are officially put into services of guiding and teaching teacher training. Another is that faculty members in charge of teacher training course are trying to level up the qualifications of teachers by rigorous disciplining.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.3
• /
• pp.95-105
• /
• 1985

This dissertation presents an exact solution for the normal and shearing stresses of an orthotropic plane body loaded by a moment load. The solution satisfies the conditions of equilibrium compatibility equations concurrently and is governing for the body being in the elasto-plastic state. An Airy stress function is introduced to solve the problem related to an orthotropic half-infinite plane under a moment load. All the equations for orthotropy must be degenerated into the expressions for isotropy when orthotropic constants are replaced by isotropic ones. The author has evaluated all the equations of orthotropy and succeeded in obtaining exactly identical expressions to the equations of isotropy which were derived independently by of L'hosptials rule. The analytical results of isotropy are compared with the simple results of other investigator. Since moment Load under the elastic state and plastic state only is a particular case of moment load under the elasto-plastic state. All the equations of elasto-plastic state case are degenerated into the expressions for the each case. The formal solution is expressed in terms of closed form. The orthotropic constants are evaluated for two kinds and two different orientations of the grain of wood and two kinds of structures. The numerical results for orthotropy are evaluated for one kind and two different orientations of three-layered ply wood. The distribution of normal and shearing stresses are shown in figures. It is noted that the distribution of stresses of orthotropic materials depends on the type of materials and orientations of the grain and stiffening.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.65-79
• /
• 1992

This study is concerned with the optimal design of two hinged steel arches with I cross sectional type and aimed at the exact analysis of the arches and the safe and economic design of structure. The analyzing method of arches which introduces the finite difference method considering the displacements of structure in analyzing process is used to eliminate the error of analysis and to determine the sectional force of structure. The optimizing problems of arches formulate with the objective functions and the constraints which take the sectional dimensions(B, D, $t_f$, $t_w$) as the design variables. The object functions are formulated as the total weight of arch and the constraints are derived by using the criteria with respect to the working stress, the minimum dimension of flange and web based on the part of steel bridge in the Korea standard code of road bridge and including the economic depth constraint of the I sectional type, the upper limit dimension of the depth of web and the lower limit dimension of the breadth of flange. The SUMT method using the modified Newton Raphson direction method is introduced to solve the formulated nonlinear programming problems which developed in this study and tested out throught the numerical examples. The developed optimal design programming of arch is tested out and examined throught the numerical examples for the various arches. And their results are compared and analyzed to examine the possibility of optimization, the applicablity, the convergency of this algorithm and with the results of numerical examples using the reference(30). The correlative equations between the optimal sectional areas and inertia moments are introduced from the various numerical optimal design results in this study.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.859-867
• /
• 1997

In order to utilize the processing wastes of squid, chitosans were manufactured from the pens of domestic squid, Todarbdes pacificus and foreign squid, Ommastrephes bartrami and then, its rheological properties were studied. The amounts of nitrogen and minerals of the domestic squid pens were $11.4\%\;and\;0.1\%$ respectively, whereas those of its chitosan were $7.5\%\;and\;0.2\%$. In case of foreign squid pen and chitosan, the amounts of nitrogen and minerals were $12.1\%,\;0.8\%\;and\;7.8\%,\;0.2\%$ respectively. Intrinsic viscosity $([\eta]) $ of domestic and foreign squid pen chitosans were decreased with increasing pH from 3.4 to 5.4 which might be due to the reduced repulsion in inter- of intra- chitosan molecules. Intrinsic viscosity of the domestic and foreign squid pen chitosans were decreased with increasing NaCl concentration thus indicated that the domestic and foreign squid pen chitosans were polyelectrolyte molecules and stiffness of squid pen thitosans were 0.11 similar to that of k-carrageenan. Flow type of squid pen chitosan solutions were pseudoplastic fluids without yield stress by the viscosity measurement. But the squid pen chitosan solutions showed newtonian fluid up to $0.15\~0.24\%$ concentration for domestic and $0.21\~0.24\%$ concentration for foreign at $10\~50\%$. Concentration dependence of consistency index in infinitive dilute domain (Kc) were higher in the dilute domain than entangled domain. Activation energies (Ea) of the squid pen chitosans were 3.7, 6.3, 3.6, 4.0 and 4.1 Kcal/g moi for domestic and 3.2, 3.1, 3.4, 3.8 and 3.6 Kcal/g mol for foreign at 0.1, 0.15, 0.25, 0.35 and $0.5\%$, respectively.