• 제목/요약/키워드: STORM 모형

검색결과 340건 처리시간 0.027초

도시유역의 유출·수질해석을 위한 ILLUDAS-NPS 모형 (ILLUDAS-NPS Model for Runoff and Water Quality Analysis in Urban Drainage)

  • 김태화;이종태
    • 한국수자원학회논문집
    • /
    • 제38권9호
    • /
    • pp.791-800
    • /
    • 2005
  • ILLUDAS-NPS 모형은 초기강우에 의한 수질항목별 오염부하량 및 농도계산을 위하여 개발하였다. 이 모형은 국내의 도시지역 유출해석에 주로 사용되는 ILLUDAS 모형에 건기 및 우기시의 수질해석 과정들을 추가한 것으로써 건기시의 경우 유량 및 수질 계산은 계수지정법을 사용하였으며, 우기시의 경우 유량 계산은 기존 ILLUDAS 모형의 알고리즘, 수질 계산은 일일 오염물 축적법과 쓸림방정식을 적용하여 계산시간별 오염물질 부하량 및 농도 등을 계산하였다. 모형의 검정을 위하여 홍제천 유역의 3개 강우사상을 대상으로 검토한 결과 총부하량, 첨두농도, 첨두농도 발생시간 등에서 전반적으로 실측치와 유사한 결과를 얻을 수 있었다. 또한, 이 모형에 의한 계산결과를 SWMM, STORM 등의 기존 도시유출${\cdot}$수질 모형들의 결과와 비교 검토하였는바, SWMM 모형과 비교적 잘 일치함을 확인할 수 있었다.

폭풍해일과 강우에 의한 해안 도시 범람 수치모의 (Numerical Simulation of Coastal Urban Inundation due to Storm Surge and Rainfall)

  • 김건형;표창규;윤성범
    • 한국해안·해양공학회논문집
    • /
    • 제26권6호
    • /
    • pp.388-396
    • /
    • 2014
  • 본 연구에서는 태풍 매미에 의해 큰 피해를 입은 마산지역을 대상으로 폭풍해일과 강우에 의한 범람 수치모의를 수행하였다. 이를 위해 폭풍해일-강우-우수관망 결합 수치모형을 사용하였다. 그 결과, 기존의 폭풍해일만을 이용하였을 경우보다 강우와 우수관망 수치모형을 고려하였을 때의 침수면적 및 침수고가 크게 증가한 것을 확인하였다. 또한 마산시에서 추진 중인 방재언덕을 설치하였을 때의 침수범람결과를 추가적으로 수치모의 하여 방재언덕의 실효성을 검토하였다. 그 결과 방재언덕의 영향으로 폭풍해일에 의한 최대 침수심은 저감되었으나, 우수가지상부에서 바다로 원활하게 배수되지 못해 침수지속기간이 증가하는 것을 확인하였다.

토사 적체에 따른 우수관의 성능불능확률 (Probability of performance failure of storm sewer according to accumulation of debris)

  • 권혁재
    • 상하수도학회지
    • /
    • 제24권5호
    • /
    • pp.509-517
    • /
    • 2010
  • Statistical distribution of annual maximum rainfall intensity of 18 cities in Korea was analyzed and applied to the reliability model which can calculate the probability of performance failure of storm sewer. After the analysis, it was found that distribution of annual maximum rainfall intensity of 18 cities in Korea is well matched with Gumbel distribution. Rational equation was used to estimate the load and Manning's equation was used to estimate the capacity in reliability function to calculate the probability of performance failure of storm sewer. Reliability analysis was performed by developed model applying to the real storm sewer. It was found that probability of performance failure is abruptly increased if the diameter is smaller than certain size. Therefore, cleaning the inside of storm sewer to maintain the original diameter can be one of the best ways to reduce the probability of performance failure. In the present study, probability of performance failure according to accumulation of debris in storm sewer was calculated. It was found that increasing the amount of debris seriously decrease the capacity of storm sewer and significantly increase the probability of performance failure.

소유역 유출해석을 위한 유한요소모형의 개발 (Development of Finite Element Model for Storm Runoff from Small Watersheds)

  • 최진규;박승우
    • 한국농공학회지
    • /
    • 제32권4호
    • /
    • pp.89-98
    • /
    • 1990
  • The objectives of this study are to develop a deterministic, distributed, and event - oriented hydrologic watershed model and to test the applicabilities of the model to small watersheds. The resulting model SRAFEM, Storm Runoff Analysis by Finite Element Method, is capable of simulating storm runoff from small watersheds using two - dimensional overland flow and one - dimensional channel flow components by. kinematic approximations and finite element method. Two small watersheds were selected and the applicability of the model was tested. The test results showed that the mean simulation errors for runoff volume and peak flow were 13.9% and 19.1 % for Yeonwha watershed. They were 42.8% and 8.0% for Banweol watershed, respectively.

  • PDF

STORM 모형을 이용한 비점오염원 부하의 규모와 특성에 관한 연구 (A Study on Scale and Characteristics of Nonpoint Pollution Using STORM Model)

  • 김도연;이홍근
    • 한국환경보건학회지
    • /
    • 제22권1호
    • /
    • pp.5-11
    • /
    • 1996
  • The more accurate estimation of the pollutant loadings from nonpoint source is needed to evaluate water quality of water resources such as river and reservoir. Therefore this study was performed to grasp the scale and characteristics of pollutant. In this study, STORM model was applied to I-cheon district to estimate runoff and pollutant loading of SS, BOD, T-N and $PO_4-P$. The results estimated by STORM model were fitted well to surveyed water quality in flow, SS and BOD. The annual loadings were estimated to be 36,463 kg/$km^3$/yr of SS, 8,090 kg/$km^3$/yr of BOD, 4,435 kg/$km^3$/yr of T-N and 358 kg/$km^3$/yr of $PO_4-P$. It was also found that the monthly pollutant loadings of SS, BOD, $PO_4-P$ were greatest in May and T-N in April.

  • PDF

대기 대순환 모헝과 해수면 온도 관측 자료를 이용한 태풍 활동의 계절 예측 가능성 (Seasonal Predictability of Typhoon Activity Using an Atmospheric General Circulation Model and Observed Sea Surface Temperature Data)

  • 한지영;백종진
    • 한국지구과학회지
    • /
    • 제27권6호
    • /
    • pp.653-658
    • /
    • 2006
  • 대기 대순환 모형인 GCPS를 이용하여 북서태평양에서의 태풍 활동의 계절 예측 가능성을 조사하였다. 1979년부터 2003년까지 각 해에 대해 해수면 온도 관측 자료를 사용하여 5개월간 초기 조건을 달리한 10개의 앙상블 멤버를 적분하였다. 모형은 발생 빈도의 평균적인 월변화 경향과 발생 분포를 관측과 유사하게 모의하였으나, 발생 빈도의 경년 변화는 신빙성 있게 예측하지 못하였다. 이는 관측과 모형간 태풍 발생 빈도와 ENSO의 상관성 차이에 인한 것으로 실제 태풍 발생 빈도와 ENSO가 뚜렷한 상관 관계를 갖지 않는 것과 달리, 모형에서는 엘니뇨 시기에 평년에 비해 많은 태풍이 발생하고 라니냐 시기에 평년에 비해 적은 태풍이 발생하는 경향을 보였기 때문이다. 반면에, 관측과 모형 모두 ENSO와의 상관 관계가 높게 나타난 태풍 발생 경도의 경우에는 모형이 발생 경도의 경년 변화를 관측과 유사하게 모의하였다.

분포형 강우-유출모형의 하도자료 구축을 위한 하폭 및 하상경사 산정공식 개발 (Development of Stream Width and Bed-slope Estimation Equations for Preparing Data for Distributed Storm Runoff Model)

  • 정인균;박종윤;조형경;이지완;김성준
    • 한국농공학회논문집
    • /
    • 제52권4호
    • /
    • pp.1-10
    • /
    • 2010
  • In this study, two estimation equations for preparing stream data for distributed storm runoff model were developed by analyzing the nonlinear relation between upstream flow-length and stream width, and between upstream flow-length and stream bed-slope. The equations for stream cell were tested in Chungjudam watershed (6,661 $km^2$) using KIMSTORM. Six storm events occurring between 2003 and 2008 were selected for the model calibration and verification before the test of equations. The average values of the Nash-Sutcliffe model efficiency (ME), the volume conservation index (VCI), the relative error of peak runoff rate (EQp), and the difference of time to peak runoff (DTp) were 0.929, 1.035, 0.037, and -0.406 hr for the calibrated four storm events and 0.956, 0.939, 0.055, and 0.729 hr for the two verified storm events respectively. The estimation equations were tested to the storm events, and compared the flood hydrograph. The test result showed that the estimation equation of stream width reduced the peak runoff and delaying the time to peak runoff, and the estimation equation of stream bed-slope showed the opposite results.

설계홍수량에 영향을 미치는 매개변수의 민감도 분석: 자연유역을 중심으로 (A Sensitivity Analysis for Parameters Effection upon the Design Floods: Natural Watershed)

  • 윤여진
    • 한국수자원학회논문집
    • /
    • 제31권6호
    • /
    • pp.695-708
    • /
    • 1998
  • 최근 중·소규모의 도시전역과 자연유역에서 임계지속기간의 개념을 도입하여 설계홍수량을 산정하는 사례가 늘어나고 있는 추세에 있다. 그러나, 임계지속기간에 관한 연구는 미흡한 상태이며 특히 자연유역에 대해서는 거의 없는 상태이다. 따라서, 본 연구에서는 자연유역을 대상으로 Clark모형을 이용하여 강우분포 형태, 첨두강우 발생위치, 빈도에 따른 임계지속기간 및 첨두유량을 산정하고, 적용모형의 매개변수들에 대한 민감도분석을 실시함으로써 각종 인자들이 설계홍수량에 미치는 영향을 분석하였다.

  • PDF

유수지 배수펌프 운영조작 모형의 개발 (A Study on the Development of the Operation Models for Storm Water Pumps in Detention Pond)

  • 윤세의;이종태
    • 물과 미래
    • /
    • 제28권6호
    • /
    • pp.203-215
    • /
    • 1995
  • 본 연구는 도시유역에서 내수에 의한 침수를 경감시키기 위하여 유수지 및 빗물펌프장을 운영함에 있어 배수펌프를 효율적으로 조작할 수 있는 모형을 개발, 제시하였다. 유출량을 산정하기 위하여 설계강우의 재현기간을 10, 20, 30년으로 선정하였으며, 유수지로 유입되는 유출수문곡선은 SWMM모형을 이용하여 구하였고, 펌프의 동작확인을 위하여 페트리네트도 (Petri net diagrams)를 사용하였다. 또한 종합평가지표를 이용하여 펌프의 안정성과 효율성을 평가하였으며, 서울 시내 3개의 유수지에 모형을 적용하여 모형의 적용성을 확인하였다. 설계강우와 실적강우에 대한 수치실험 결과 본 연구에서 제시한 모형 중 모형 3은 기존의 배수펌프 조작모형보다 내수방재 측면에서 우수하였으며, 실시간 펌프운영조작에도 효과적으로 사용될 수 있다고 판단된다.

  • PDF

격자기반의 운동파 강우유출모형 KIMSTORM의 개선 (Modified grid-based KIneMatic wave STOrm Runoff Model (ModKIMSTORM))

  • 정인균;신형진;박진혁;김성준
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2008년도 학술발표회 논문집
    • /
    • pp.254-258
    • /
    • 2008
  • 본 연구는 격자기반 운동파 강우유출모형 KIMSTORM(grid-based KIneMatic wave STOrm Runoff Model)의 기능을 개선하고 적용성을 평가하는 것이다. KIMSTORM은 김성준(1998)이 개발한 분포형 강우유출모형으로 포화상태의 지표흐름 및 토양수분상태의 시공간적인 분포를 파악할 수 있다. UNIX C++ 언어로 개발되었으며, GRASS 형태의 ASCII Grid를 입출력하도록 구성되어 있는 모형으로 UNIX 운영체제에서 구동이 가능하다. 그러나 UNIX와 GRASS는 최근에 많이 이용되지 않는 추세로 KIMSTORM 모형을 이용한 홍수유출해석이 적극적으로 활용되는데 주요 제약사항이 되어 왔다. 본 연구에서는 KIMSTORM을 윈도우즈 환경에서 운영될 수 있도록 FORTRAN 90을 이용하여 재개발하였으며 주요개선 사항으로, ESRI ASCII Grid 형태의 GIS(geographic information system) 자료 입력, 물리적 침투모의 방법인 GAML (Green-Ampt and Mein- Larson) 적용, 공간강우 입력가능, 정렬 알고리즘을 이용한 계산속도의 개선, 모형 자료입력 등 전처리 기능개선, 계산결과의 자동평가 및 분포도출력 등 후처리 방식개선으로 요약할 수 있다. 개선된 모형 GAML에 의한 침투방법을 적용하여, 남강댐유역($2,293\;km^2$)의 6개 강우사상을 대상으로 결정계수, Nash & Sutcliffe 모형효율계수, 용적편차, 첨두유량의 상대오차, 첨두시간의 절대오차를 이용하여 적용성을 평가하였으며, 민감도분석결과 초기토양수분조건과 하천조도계수가 가장 큰 민감도를 나타내었다.

  • PDF