• Journal of Mechanical Science and Technology
• /
• 제14권12호
• /
• pp.1337-1347
• /
• 2000

• 한국CDE학회논문집
• /
• 제3권1호
• /
• pp.48-56
• /
• 1998

Finite element analysis is very important in the design and analysis of mechanical engineering. The process of FEA encompasses shape modeling, mesh generation, matrix solving and post-processing. Some of these processes can be tightly integrated with the current software architectures and data sharing mode. However, complete integration of all the FEA process itself and the integration to the manufacturing processes is almost impossible in the current practice. The barriers to this problem are inconsistent data format and the enterprise-wise software integration technology. In this research, the information model based on STEP AP209 was chosen for handling finite element analysis data. The international standard for the FEA data can bridge the gap between design, analysis and manufacturing processes. The STEP-based FEA system can be further tightly integrated to the distributed software and database environment using CORBA technology. The prototype FEA system DICESS is implemented to verify the proposed concepts.

• 품질경영학회지
• /
• 제36권4호
• /
• pp.37-46
• /
• 2008

There are big differences in six sigma projects between manufacturing processes and transactional/service processes. This paper analyzed the differences between the two areas by examining 18 six sigma case studies in Korean companies. To characterize six sigma case studies, step-by-step questions and check criteria were developed based on 12 step DMAIC methodology. On the basis of those characterized data, the differences between two areas were analyzed. Significant differences were found in the number of CTQs, validation of measurement systems, methods to determine improvement objectives, the methods to elicit improvement plans and types of control systems. The most significant difference was that statistical tools were widely used in manufacturing processes, but qualitative tools were used in transactional/service processes during improvement phase.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.523-524
• /
• 2007

This paper discusses the planarization process of thick copper film structure used for power supply device. Chemical mechanical polishing(CMP) has been used to remove a metal film and obtain a surface planarization which is essential for the semiconductor devices. For the thick metal removal, however, the long process time and other problems such as dishing, delamination and metal layer peeling are being issued, Compared to the traditional CMP process, Electro-chemical mechanical planarization(ECMP) is suggested to solve these problems. The two-step process composed of the ECMP and the conventional CMP is used for this experiment. The first step is the removal of several tens ${\mu}m$ of bulk copper on patterned wafer with ECMP process. The second step is the removal of residual copper layer aimed at a surface planarization. For more objective comparison, the traditional CMP was also performed. As an experimental result, total process time and process defects are extremely reduced by the two-step process.

• 한국CDE학회논문집
• /
• 제11권4호
• /
• pp.303-314
• /
• 2006

The exchange of CAD (Computer Aided Design) models between different CAD systems and to downstream applications such as manufacturing has become very important to modem industry. One serious current issue is that the process cannot automatically import existing 3-D solid models in a variety of commercial CAD formats into the process without manually re-mastering the model in current standard including "SIEP AP(Application Protocol) 203 Edition 1" To fully integrate technical data from the design agency to the shop floor, design intent and validated 3D geometry of feature based parametric CAD model should be brought into the standardized processes. To overcome this limitation, AP203 Edition 2 (Ed.2) and its related STEP parts such as Part55, Part108, Part109, Part111 and Part112 are starting to be available to handle this problem. The features in Part111 are harmonized with the machining features available in AP224. This paper is focused on two mapping technologies: CAD to Part111 mapping and Pat111 to AP224 mapping including case studios and it will provide the guideline about what should be done next in the AP203 Ed.2 to AP224 mapping. The final goal of this project is to integrate technical data from CAD to AP224 based manufacturing information through AP203 Ed.2.

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.641-644
• /
• 2021

Wearable devices and IoT are being utilized in various fields, where all systems are developing in the direction of multi-functionality, low power consumption, and high speed. In this paper, we propose a DC -DC Step-down C onverter for IoT smart devices. The proposed DC -DC Step-down converter is composed of a control block of the power supply stage. It also consists of an overheat protection circuit, under-voltage protection circuit, an overvoltage protection circuit, a soft start circuit, a reference voltage circuit, a lamp generator, an error amplifier, and a hysteresis comparator. The proposed DC-DC converter was designed and fabricated using a Magnachip / Hynix 180nm CMOS process, 1-poly 6-metal, the measured results showed a good match with the simulation results.

• 한국정밀공학회지
• /
• 제24권8호통권197호
• /
• pp.34-40
• /
• 2007

In this study, focusing on reducing a load in forming helical gears, the extrusion using two-step processes for manufacturing helical gear is proposed. The process is composed of the extrusion step in which spur gear to be used as a preform in next step is formed, and the torsion step in which the preform of spur gear is formed to helical gear. Upper-bound theory for the two-step process is applied and compared with the results of experiment. The result of upper-bound solution has a good agreement with that of the experiment and the FE analysis. The newly proposed method can be used as an advanced forming technique to remarkably reduce a forming load, to prolong a tool life, and to replace the conventional forming process of helical gears. Results obtained from the extrusion using two-step processes enable the designer and manufacturer of helical gear to be more efficient in this field.

• 한국가구학회지
• /
• 제28권4호
• /
• pp.371-379
• /
• 2017

This study established the scope of the main contents and interpretation of wooden product design using the CNC manufacturing technology as well as the basic concepts of which were defined, accordingly. After coming up with the definition of the CNC wood manufacturing technology from the academic point of view, a design study, using the practical CNC manufacturing technology, was conducted by analyzing and summarizing the contents of each process. In addition, data research and analysis including review on literatures and case studies of existing products were promoted besides design development through application of the design concepts, ergonomics, principle of molding, etc. Ultimately, this study suggested the step-by-step procedure in design drawing, 3D modeling, CAD/CAM data production, CNC manufacturing, and prototype completion together with figures. Through this, the study proposed a standard manufacturing guideline for wood product design using digital manufacturing technology. Base on such efforts, the advantages and points for improvement in product design using CNC manufacturing technology and the future direction of development were forwarded. Meanwhile, a prototype image that was developed through collaborative efforts between the academic circle and field workers was presented to help the case study on the wooden product design technique using CNC.

• 산업공학
• /
• 제9권2호
• /
• pp.191-202
• /
• 1996

A variety of approaches on performance evaluation modeling have appeared in the technical literature for flexible manufacturing systems(FMS) which can be evaluated only through computer simulation. This study represents a comparative approach for FMS performance evaluation modeling based on reliability, availability and maintainability, and life cycle cost. The methodology proposed in this research includes the following three-step generative approaches. First, a static model to find the initial system configuration is considered under the assumption that the system availability is given as one (failure and maintenance are not considered), and in second step, a stochastic simulation is proposed to serve as a performance evaluation model for FMS with stochastic failure and repair time. In the last step, we developed a simulation modeling using a simulator, FACTOR/AIM to consider a variety of performance factors and dynamic behavior of FMS. Also the applicability and validity of the proposed approaches has been tested and compared through the results of a sample problem using computer programs and procedures developed in each step.

• 한국기계가공학회지
• /
• 제2권4호
• /
• pp.67-72
• /
• 2003

In this study, to investigate the effects of 2-step shot peening at the surface of spring steel, crack growth tests are conducted on spring steel and shot peened specimens. And then the residual stresses and fractographs are examined. The crack growth equation that can describe the whole crack growth behavior is used to evaluate the experiment results. The results show that fatigue crack glows slowly in the shot peened specimen than in the unpeened. And in the case of the 2-step shot peened specimen the initial stress intensity factor range and the fracture toughness is higher than the unpeened specimen due to the compressive residual stress. Fractographs show that the compressive residual stress of the surface suppress the fatigue crack opening and consequently slow crack growth rates.