• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1439_1440
• /
• 2009

본 논문에서는 최근 국내에서 개발된 자기재 및 플라스틱 핀 애자의 단점을 보완한 실리콘 고무 재질의 하우징으로 구성된 폴리머 핀 애자(Polymer Pin Insulator) ANSI Class 55-3에 대하여 ANSI Std. C29.5(1984)에서 요구되는 전기적 및 기계적 특성을 고찰하였다. 정격전압이 11.5kV인 폴리머 핀 애자의 건조 및 주수 상용주파섬락전압시험, 뇌충격섬락전압시험, 전파장해전압시험 등의 전기적 특성과 굽힘시험 등의 기계적 특성을 고찰하였으며, 그 결과 ANSI Std. C29.5(1984)의 요구사양에 만족한 실선로에 적용할 수 있는 특성을 나타내었다.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1179-1186
• /
• 2006

This paper was designed to assess the adhesive properties of hard coatings on non-nitrided and nitrided various tool steels. Estimations of adhesion were done to scratch test which is mainly used in hard coating. The critical load$(L_c)$ between coating and substrate is defined through analysis of frictional load vs. normal load curve, signals of acoustic emission and optical observations. Coatings employed in this study are TiN, CrN and TiAlN, tools as substrates are STD11, STD61 and SKH51. It was classified to substrates with/without intermediate nitrided layer and hard coatings on substrate were deposited by arc PVD. Results showed that harder substrates and coatings give higher values of critical loads.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.186-189
• /
• 2005

This paper was designed to assess the adhesive properties of hard coatings on non-nitrided and nitrided various tool steels. Estimations of adhesion were done to scratch test which is mainly used in hard coating. The critical load(Lc) between coating and substrate is defined through analysis of frictional load vs. normal load curve, signals of acoustic emission and optical observations. Coatings employed in this study are TiN, CrN and TiAlN, tools as substrates are STD11, STD61 and SKH51. It was classified to substrates with/without nitrided layer and hard coatings on substrate were deposited by arc PVD. Results showed that harder substrates and coatings give higher values of critical loads.

• 정보처리학회논문지D
• /
• 제11D권7호
• /
• pp.1459-1466
• /
• 2004

소프트웨어 응용 분야의 확대로 인해, 소프트웨어는 더 크고, 더 복잡해지고 있다. 게다가 개발 기간의 단축 및 비용의 절감${\cdot}$품질의 향상 또한 요구되고 있다. 이러한 요구를 충족시키기 위해 여러 효율적인 방법이 제안되었고, 구현되었다. 대표적으로 프로세스 개선과 객체지향 개발, 요구공학, 소프트웨어 메트릭스 등이 있다. 이러한 수많은 방법 중에서 요구공학은 고품질의 소프트웨어 개발의 기반이 된다. 즉, 고품질의 소프트웨어를 개발하기 위해서는 먼저 요구를 획득하고, 기술하여야 하며, 이에 대한 검증과 관리를 통해 요구사양서의 품질을 향상시켜 가야 한다. 본 논문에서는 IEEE Std-830-1998의 좋은 요구사양서가 가져야 할 특성을 중심으로, 요구사양서에 기술된 내용 자체를 정량적으로 품질 평가할 수 있는 메트릭스를 제안하였다.

• 열처리공학회지
• /
• 제18권1호
• /
• pp.24-28
• /
• 2005

New post plasma nitriding can achieve a high uniformity that have been difficult in DC nitriding and have a high productivity comparable to gas nitriding. However, it has not a enough high nitriding potential for a rapid nitriding, because surface activation or ion etching in the general plasma nitriding cannot be expected. Thus, in this study, the effects of pre-treatments with oxidation and reduction gas have been investigated to improve the nitriding kinetics of post plasma nitriding. An effective pre-treatment consisting of oxidation and reduction resulted in the increase of surface energy of STD 11. This induced the surface hardness and the effective nitriding depth of STD 11. It is thought that the increase of the surface energy and the surface area with pre-treatment promote the nucleation of nitriding layer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.739-742
• /
• 2000

From the experimental study of W-EDM for alloyed steel, the characteristics such as Hand Drum Form and surface roughness have been observed and evaluated for various conditions. In square hole, the increase of If as to made condition the calculate high value of surface roughness. Also compare dimensionless square hole with circle hole' graph. In circle hole, if a value of surface roughness IP 6 in a side of circle it show a 0.4${\mu}{\textrm}{m}$ and in IP 8, 0.6${\mu}{\textrm}{m}$, in IP 10, 0.7${\mu}{\textrm}{m}$, in IP 12. 0.8${\mu}{\textrm}{m}$ higher than before. This figure show the surface roughness is higher than before, because a table move in either X-axis or Y-axis in square hole, on the contrary, in circle there table move in X-axis and Y-axis at the same time. hand drum form getting small when wire tension increase 1000gf to 1500gf, at the same working conditions. the smaller of off time, the mailer of hand drum form in same condition and same wire tension. but if you compare square hole with circle hole' graph hand drum form displayed in maintained term of working condision, on the contrary, in case of square hole variation of hand drum form is more increase than a grow of IP

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.537-542
• /
• 2000

Wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of STD-11 in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension. The deflection is the smallest at the speed of wire of 10.6m/min and the water specific resistivity of 5k$\Omega$.cm. The deflection is found to be decreased as increasing dwell time. But if the water pressure is high, it is found not to be changed after the vibration of 4sec. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, is observed for rough wire-cutting EDM of STD-11. This phenomena is found to be similar in spite of the change of EDM energy level. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.567-572
• /
• 2000

From the experimental study of W-EDM for alloyed steel, the characteristics such as Hand Drum Form and surface roughness have been observed and evaluated for various conditions. In square hole, the increase of IP as to made condition, the calculate high value of surface roughness. Also compare dimensionless square hole with circle hole' graph, In circle hole, if a value of surface roughness IP 6 in a side of circle it show a 0.4${\mu}{\textrm}{m}$ and in IP 8, 0.6${\mu}{\textrm}{m}$, in IP 10, 0.7${\mu}{\textrm}{m}$, in IP 12, 0.8${\mu}{\textrm}{m}$ higher than before. This figure show the surface roughness is higher than before, because a table move in either X-axis or Y-axis in square hole, on the contrary, in circle there table move in X-axis and Y-axis at the same time. hand drum form getting small when wire tension increase 1000gf to 1500gf, at the same working conditions. The smaller of off time, the maller of hand drum form in same condition and same wire tension. but if you compare square hole with circle hole' graph, hand drum form displayed in maintained term of working condision, on the contrary, in case of square hole variation of hand drum form is more increase than a grow of IP

• 전기학회논문지
• /
• 제64권11호
• /
• pp.1618-1625
• /
• 2015

The reliability of catenary system is very important for uninterrupted train operation as it supplies electric power to train without redundant facilities. This paper provides a systematic approach to the reliability analysis of the catenary system based on FMECA procedures defined by global standards such as MIL Std 1692a and IEC 60812. Field failure data collected from the operation and maintenance of high-speed railway catenary system for 9 years are used to derive critical failure modes and to evaluate the criticality of the failure modes. Evaluation of the criticality are carried out by quantitative procedures defined by MIL Std 1692a and by criticality matrix defined by IEC 60812. FMECA results suggests that three critical failure modes should be checked carefully during maintenance work, which include strand break of dropper and voltage equalizing wire, power supply failure of feeder. Maintenance procedure of catenary system in order of importance is suggested too. These results can be applied to maintenance planning and design of catenary system to improve the reliability of electric railway system.

• 대한전자공학회논문지TC
• /
• 제44권2호
• /
• pp.6-14
• /
• 2007

본 논문에서는 V-BLAST (Vertical-Bell-lab Layered Space Time) 복호 알고리즘의 ordering과 slicing 과정에 MAP(Maximum A Posteriori) 디코더의 외부 정보 (extrinsic information)를 이용한 최적의 터보 부호화된 (Optimal Turbo Coded) V-BLAST 적응 변조 시스템을 제안 후 성능을 관찰한다. 외부정보는 ordering과 slicing에 사전 확률 (a priori probability) 로서 사용되며 시스템 복호 과정은 주 반복 (Main Iteration) 및 부 반복 (Sub Iteration) 과정으로 이루어진다. 채널 상태에 따라 변조 방식을 달리하는 적응 변조 시스템을 기존의 터보 부호화 (Turbo Coding) 된 V-BLAST 시스템과 최적의 터보 부호화된 V-BLAST 시스템에 각각 적용하고 전송률 (throughput) 을 비교하여 제안된 시스템을 적용할 경우 어느 정도의 성능 개선이 있는가를 살펴본다. 또한, 제안된 시스템에 선택적 전송 다이버시티 (STD : Selection Transmit Diversity) 기법을 적용한 후 성능의 향상을 관찰한다. 모의 실험결과, 적응 변조 시스템에서 최적의 터보 부호화된 V-BLAST 기법을 적용한 경우가 기존의 터보 부호화된 V-BLAST 기법을 적용한 경우에 비하여 11 dB의 SNR (Signal to Noise Ratio) 영역에서 최대 약 350 kbps의 전송률 향상이 나타났다. 특히, 제안된 시스템에 선택적 전송 다이버시티가 적용된 경우에는 송수신 안테나가 각각 2개인 기존의 터보 부호화된 V-BLAST 기법을 적용한 시스템의 경우에 비하여 같은 SNR 영역에서 최대 약 1.77 Mbps의 전송률이 개선됨을 보였다.