• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.92-99
• /
• 2012

It is often thought that because no-start motor vehicles cannot start an engine, a fire cannot occur for motor vehicle causes. However, although the engine cannot start up, some parts may be live with electricity if a battery is connected. If the parts have problems, a fire can occur. This study analyzed the causes of fires occurring when a motor vehicle was loaded onto a tow truck to service no-start. It is suggested that no-start motor vehicles should separate a battery terminal to prevent a fire. And this fire is related to automotive products liability.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.58-64
• /
• 2016

In this paper, the design of rotor shape was performed for improvement of start-up characteristics and efficiency in single-phase LSPM. In order to improve the start-up characteristics, shape of rotor aluminium cage bar was changed. Through arrangement of permanent magnets and installation of flux barriers, it was performed torque ripple reduction and efficiency improvement. Cogging torque and back-EMF is calculated by the no-load analysis, start-up time is calculated by the start-up state analysis, efficiency and torque ripple is calculated by steady state analysis. The characteristics of the motor were calculated through FEM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.631-632
• /
• 2006

This paper is written by research for the transient characteristics of the Single-phase Line-start permanent Magnet. The Single-phase Line-start permanent Magnet is most likely to substitute for Single-phase Induction Motor which is used about many appliance currently, because that has good points. For example, It has a Line-start of ability and a High-efficiency. And it need not power convergence device. The rotor of The Single-phase Line-start permanent Magnet has cage-bar with permanent magnet. This motor is started by cage-bar. When it entered synchronous condition, the rotor is rotated by the permanent magnet. But the design of the permanent magnet is very important, because the breaking torque of the permanent magnet interrupt to start a rotor. Finally, if Flux Barrier is not concerned, we do not get result of our object. Therefore this thesis is concerned about Flux Barrier.

• 제어로봇시스템학회논문지
• /
• 제12권12호
• /
• pp.1249-1255
• /
• 2006

This paper presents a constant power control logic for perfect starting a microtubine in vehicle. Under extremely low temperature, performance of the start-up system is severely dropped than that of room temperature because of increasing of load of mechanical parts including engine core and drop of the lead-acid battery capacity. Unfortunately, performance drop of lead-acid battery makes severe problems that cause a malfunction of fuel and lubrication system and power fail of digital devices. So we propose the new start-up logic by constant output power control of lead-acid battery using PWM inverter controller for preventing above problems and keeping good performance of start-up system for microturbine. Also, we prove usefulness of new start-up logic through experimental results under $-32^{\circ}C$ ambient temperature.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권4호
• /
• pp.358-364
• /
• 1999

The auxiliary transformers or start-up/stand-by transformer(s) are installed against the start-up and shut-down of generator and emergency status in fossil power plant. The on-site power supply configuration using these transformers must be determined, considering configuration requirements, site characteristics, reliability and availability severely because it is remarkably important for safety and ecfonomy of plant. The auxiliary or start-up/stand-by power supply configuration has been determined considering only safety requirements and construction cost until now in Korea. This paper presents general theorems for the reliability estimation and proposes 2-unit based 4 alternatives for the start-up power supply stystem of 500㎿ standardized fossil power plant. The reliability and unavailability of equipment, system and configuration are determined using minimal cut-set methodology. The optimized plan of 4 alternatives is determined based on this ultimate reliability and unavailability.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권5호
• /
• pp.517-523
• /
• 1999

The Start-up transformers or on-site stand-by transformers are installed for the start-up and shut-down of generator and emergency status in unclear power plant. The on-site power supply configuration using these transformers must be detemined by considering configuration requirements, site characteristics, reliability and availability severely because it is remarkably important for safety and benefit of plant. The start-up or stand-by power supply configuration has been determined considering only safety requirements and construction cost up to now in Korea. I study various reliability estimating methods for the prediction of availability, and estimate the unavailability for the start-up power supply system of two 1,000㎿ unclear power plants. I also detemine the reliability and unavailability and unavailavility of equipment, system and configuration using FTA method.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.2028-2037
• /
• 2009

This paper presents the simulator for dynamic modeling of a MT(micro turbine) during start-up period. The simulator is implemented by modeling a dynamic power of main components of a MT including compressor, combustor and turbine. A modeling for a MT under steady state operation can be accurately built from thermodynamics analysis. But dynamic modeling during start-up period is very difficult because efficiency of main components is very low and the designed value has big error and nonlinear characteristics during start-up. In this paper, new method without using thermodynamics analysis during start-up is proposed for the simulator. The power models of main components are derived from analysis of the experimental operation data by test motoring using a electric starter under constant power output. The simulator is developed using MATLAB/Simulink. For constant power output control, sensorless vector inverter is designed and algorithms for starting from stall and method for controling a output power are proposed. The performance of developed simulator is verified by comparing experimental and simulation start-up results.

• 한국정보처리학회논문지
• /
• 제6권9호
• /
• pp.2451-2459
• /
• 1999

네트워크의 발달에 의해 현대 사회는 정보의 국경이 사라졌다. 컴퓨터 네트워크를 이용해 현대인들은 대용량의 데이터를 빠른 시간 내에 전송할 수 있게 되었고, 수많은 정보를 보다 쉽게 얻을 수 있는 환경이 조성되었다. 그러나, 네트워크 상에 데이터의 흐름이 많아지면서 혼잡 현상이 발생하게 되어 이에 대한 관리가 중요하게 되었고, 그 중의 한 방법이 slow start이다. 본 논문에서는 slow start의 변형을 통해 네트워크 상의 혼잡을 보다 효율적으로 제어하고, 완화시킬 수 있는 방법을 제안하고 그 성능을 평가하였다.

• Asian Journal of Innovation and Policy
• /
• 제10권1호
• /
• pp.90-107
• /
• 2021

This paper analyses how technological capabilities and entrepreneurship of technology-based start-ups affect their performance. In this paper, a multiple regression analysis was conducted on 248 technology-based start-ups. The effects of indicators of technological capacity like R&D intensity, R&D organization, technology competitiveness, patents, and certification were analyzed. Factors affecting sales were R&D intensity and technological competitiveness. Technology competitiveness and patents were the significant factors influencing product competitiveness. The factor that positively influenced organizational performance, customer performance, and achievement of start-up goals was technological competitiveness. The results of such an analysis should be designed to discover and foster long-term innovation potential, rather than relying on short-term financial performance.

• Asian Journal of Innovation and Policy
• /
• 제12권2호
• /
• pp.216-228
• /
• 2023

Expectations and demands for the paradigm of healthcare systems are changing in response to changes in the characteristics of population properties and industrial structures; therefore, it is time to prepare for the career diversification of nursing students who have mainly entered the clinical field. The study tested the pathway of financial literacy on the relationship between entrepreneurship and nursing start-up attitude among nursing students. We obtained data from 177 South Korean nursing students through email and mobile phone. The analysis of the mediating effect was performed by hierarchical multiple regression. The SPSS WIN program was adopted. Entrepreneurship and financial literacy of subjects had a significantly positive effect on nursing start-up attitudes. Financial literacy indirectly affected the relationship between nursing students' entrepreneurship and nursing start-up attitude, and significance was verified by Process Macro. Financial literacy can mediate between entrepreneurship and nursing start-up attitudes. These factors will provide an important basis for nursing students to grow into talented people with business capabilities. Nursing education should strengthen the foundation that promotes business competence in nursing students.