• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.220-225
• /
• 2003

Recent issue of optical actuator is applying to mobile device. It leads actuator to become smaller than conventional type. This paper proposes the design of micro actuator plate spring and analysis of its vibration characteristic. Considering natural frequency of spindle motor, 1st and 2nd eigenfrequency of micro actuator must avoid its natural frequency. First, magnetic circuit is designed by using fine pattern coil and magnetic force is acquired by simulation program. Then, concept design is achieved by topology optimization. From concept design, micro actuator plate spring is embodied through DOE(design of experiment). Finally, considering vibration characteristic simultaneously, optimal plate spring design is determined by RSM(response surface method).

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2530-2532
• /
• 1998

Micro gold electroplating structure is fabricated by surface micromachining process. The made structure is clamped-clamped beam and its 1st natural frequency is measured by resonance method. In order to find residual stress, first natural frequency of beam which has tensile stress inside is analysed using Rayleigh's method. Elastic modulus and residual stress are estimated from the measured natural frequency.

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.298-305
• /
• 2013

Uniform silica nanobeads were synthesized by St$\ddot{o}$ber method and assembled in the form of monolayer on glass substrate using sonication method. Before the assembly of silica nanobeads, glass substrates were treated with molecular linkers, such as CP-TMS and PEI, and nanobeads were dispersed in toluene. In attachment test, SO (sonication without stacking) method and SS (sonnication with stacking) method was used and sonication time was controled. After the experiment, microbalance was use to measure deviation between before and after the attachment experiment then calculate percent of coverage. Minutely observe with SEM (Scanning Electron Microscopy) then select the most close-packed and monolayer assembled cover glass and calculate DOC (Degree of Coverage). In SO method, DOC increased very sharply and reach over 140 percent point, also got lots of multi-layer region. On the other hand, in SS method DOC increased slower than SO method but more close-packed and monolayer assembled.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.4
• /
• pp.39-44
• /
• 2009

Purpose: To design a mini optical system photographing the iris, which is used in the iridology. Methods: We designed a mini optical system photographing the iris by using the Sigma 2000 design program. Results: We designed a mini optical system photographing the iris, which is suitable in the CCD using a micro actuator for auto-focusing, of which characteristics have the TCL of 30 mm, a magnification of -0.65, about 8.0 mm distance from the 1st lens to the last lens, the max barrel diameter of 11 mm, and about 1 mm of the effective stop diameter. Also the resolution line width of this system is characterised by 92 lps/mm at the 30% MTF value criterion. Conclusions: By designing an optical system of which characteristics have the TCL of 30 mm, about 8.0 mm distance from the 1st lens to the last lens, the max barrel diameter of 11 mm, and the resolution line width of $5.4{\mu}m$ at the 30% MTF value criterion, we could miniaturize the iris photographing optical system.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.4 no.1
• /
• pp.45-50
• /
• 2012

The Knowledge-Based Society in $21^{st}$ century requires innovation in colleges' roles and characteristics. The recent colleges stress researches on industry and school in industrialized society; they try to improve the quality of higher education and to have responsibility of instructing vocational education. However, professors do not have enough opportunities to consider about teaching methods. Thus, during the class, they often fail to demonstrate their actual experience. This is because they have not gained enough chances to improve professionalism of lecture. Therefore, colleges have to provide more opportunities to professors to improve their abilities of teaching. This paper proposes mentoring programs, portfolio, and micro-teaching for improvement of lecture.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.107-115
• /
• 1997

In this paper, a 23 GHz push-push oscillator was designed and fabricated for 23 GHz point-to-point communication using split ring resonator. The split ring resonator was equivalent circuit and numerical method of MPIE(Mixed Potential Integral Equation). The analysis of split ring resonator which coupled between microstrip lines was carried out with transmission-mode using this results. The fabricated oscillator showed the output power of 4 dBm, the 1'st harmonic suppression of -20 dBc, the 3rd harmonic suppression of -34 dBc, a SSB phase noise of -109 dBc / Hz at 1MHz offset frequency from the carrier was achieved and 1.4 percents efficiency at 23 GHz. The experimental outputs were in good results with the theoretical and simulated results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.17-22
• /
• 2013

Recently, microcellular polymer films have been widely used as absorbents, support cells, and sensors in the industrial fields of IT, NT, BT, and ST. The conventional fabrication methods of microcellular polymer films are not only more complicated than those of non-microcellular polymer films, but also require a longer production time. In this paper, we propose a new hybrid fabrication method for microcellular polymer films; films can be rapidly made using UV laser processing with chemical blowing agents. The experimental results show that the number of the micropores increased with respect to the laser fluence and the concentration of the chemical blowing agents.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.927-934
• /
• 2002

In order to provide various multimedia services in a wireless network, the call admission control for wireless channels should be resolved at the time of call setup and handoff by moving mobile terminal. In this paper. we propose a reliable DCAC( Distributed Call Admission Control)scheme using virtual cluster concept. The proposed DCAC scheme considers the state of $1^{st}$ and $2^{nd}$ adjacent cells to provide a reliable call handling. The proposed scheme is analyzed by simulations and mathematical methods.

• Journal of Adhesion and Interface
• /
• v.22 no.1
• /
• pp.1-7
• /
• 2021

The importance of high capacity energy storage devices has recently emerged for stable power supply through renewable energy generation. From this point of view, the Na-air battery (NAB), which is a next-generation secondary battery, is receiving huge attention because it can realize a high capacity through abundant and inexpensive raw materials. In this study, activated carbon-based catalysts for hybrid type Na-air batteries were prepared and their characteristics were compared and analysed. In particular, from the viewpoint of resource recycling, activated carbon (Orange-C) was prepared using discarded orange peel, and performance was compared with Vulcan carbon, which is widely used. In addition, a Pt/C catalyst (homemade-Pt/C, HM-Pt/C) was synthesized using a modified polyol method to check whether the prepared activated carbon can be used as a supported catalyst, and a commercial Pt/C catalyst (Commercial Pt/C) and electrochemical performance were compared. The prepared Orange-C exhibited a typical H3 type BET isotherm, which is evidence that micropore and mesopore exist. In addition, in the case of HM-Pt/C, it was confirmed through TEM analysis that Pt particles were evenly distributed on the activated carbon supported catalyst. In particular, the HM-Pt/C-based NAB showed the smallest voltage gap (0.224V) and good voltage efficiency (92.34%) in the 1st galvanostatic charge-discharge test. In addition, the cycle performance test conducted for 20 cycles showed the most stable performance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.225-230
• /
• 2005

It is theoretically known that recuperator can bring a significant increase in thermal efficiency of the gas turbine unit, but it also has disadvantages such as pressure loss in the flow channel, thermal stress and increase in weight. Therefore it is necessary to consider all pros and cons of this equipment in view of economic aspects throughout its life cycle. Recuperator has been applied mostly in the power ranges of $20\sim300kW$ class industrial units but hasn't been used as a larger power generation unit except for naval applications in mid twentieth century. Present paper considered the applicability of a recuperator cycle in term of pressure loss, part load aspects for power generation purpose.