• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.152-153
• /
• 2005

Side scan sonar System occupies an important position as one of marine survey equipments. The purpose of this research is to express sonar' scan images in underwater and compare with the measured size, shape and the quality of the material. Also we confirm the effectiveness of obtained images using the Side scan sonar.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.216-221
• /
• 2000

This paper deals with the Gain Control in the processing of the underwater acoustic image obtained from side scan sonar(SSS) system. At first, this paper describes the principles of SSS that is a surveying equipment for the underground of the rivers or dams as well as sea floor. Then this paper analyzes the cause and effects of the time varying intensity from the view point of transmission loss and beam pattern. At last, the time varying gain filter that is adopted by the towfish is introduced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1077-1085
• /
• 2020

In order to Mine Countermeasure (MCM), the search is carried out for the expected mine zone. At this time, mine hunting uses Autonomous Unmanned Vehicle(AUV), taking into account the danger of mine and the stability of our forces. Sonar system for identifying buried mines are equipped with Side Scan Sonar(SSS) or Synthetic Aperture Sonar(SAS). This paper describes the analysis of mine hunting effects according to the commercial SSS characteristics. Based on the characteristics of each SSS, the insonified area and recognition probability were modeled, and the analysis was performed according to the search pattern of the AUV. AUV's search pattern defines three patterns depending on the presence or absence of SSS or shaded areas. The analysis results derived search time and detection probability for each search pattern, and finally, the improvement of search depending on the presence or absence of side injection or shaded area.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.156-159
• /
• 2001

Recently, side scan sonar system has been developed and operated to survey cable laying, sunken bodies, geometry of sea bottom and so on. It uses the acoustic signals, which are emitted from two transducer arrays, left and right sides, to get geometric information of the specified area. This system consists of transceiver board, towed body, deck unit and GPS receiver. The transceiver board, nested in a watertight canister, controls the transmitting and receiving of the acoustic pulses from transducer arrays. After receiving the scattered signals, it processes BP(Band Pass) filtering, AGC(Automatic Gain Control), TVG(Time Varying Gain) and Heterodyne. The deck init has the signal processing part, A/D converter, power supplier, and real-time monitoring part. The towed body has been designed to satisfy the optimal hydrodynamic behavior during towing, In this paper, brief introductions on the design theory of transceiving part and some results from the field which have been operated recently will be introduced.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.133-141
• /
• 2023

Accurate measurement of seafloor topography plays a crucial role in developing marine industries such as maritime safety, resource exploration, environmental protection, and coastal management. The seafloor topography is constructed using side scan sonar (SSS) and single beam echosounder (SBES) or multibeam echosounder (MBES), which transmit and receive ultrasound waves through a device attached to a marine survey vessel. However, the use of a sonar system is affected by noise pollution areas, and the single beam has a limited scope of application. At the same time, the multibeam is mainly applicable for depth observation. For these reasons, it is difficult to determine the boundaries and areas of seafloor topography. Therefore, this study proposes a method to improve the backscatter data of multibeam echosounder, which has a relationship with the seafloor quality, by using digital image processing to classify the shape of the underwater surface.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.135-141
• /
• 2016

Recently, the needs for the development and application of marine robots are increasing as marine accidents occur frequently. However, it is very difficult to acquire the information by utilizing marine robots in the marine environment. Therefore, the needs for the researches of sensor networks which are composed of underwater, surface and aerial robots are increasing in order to acquire the information effectively as the information from heterogeneous robots has less limitation in terms of coverage and connectivity. Although various researches of the sensor network which is based on marine robots have been executed, all of the underwater, surface and aerial robots have not yet been considered in the sensor network. To solve this problem, a collaborative control method based on the acoustic information and image by the sonars of the underwater robot, the acoustic information by the sonar of the surface robot and the optical image by the camera of the static-floating aerial robot is proposed. To verify the performance of the proposed method, the collaborative control of a MUR(Micro Underwater Robot) with an OAS(Obstacle Avoidance Sonar) and a SSS(Side Scan Sonar), a MSR(Micro Surface Robot) with an OAS and a BMAR(Balloon-based Micro Aerial Robot) with a camera are executed. The test results show the possibility of real applications and the need for additional studies.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.177-182
• /
• 2010

Sediment transport around artificial habitat which is induced by the change of flow due to installation of the structure plays a role not only as a defect function of subsidence and burial but also bottom-environment control function. Using Side Scan Sonar (SSS), Differential Global Positioning System (DGPS) and Scuba diving equipment, we investigated a facility condition of a dice reef installed on Pohang coast of the East Sea. Investigation result, at total 139 place, 10,526 dice reef was discovered. As the level which affects function of the above 0.5m, the case 4 place of burial (0.5~1.2m, 2.9%), scour appeared with 3 place (0.5m, 2.2%) and broken was appeared with 183 artificial reefs (1.74%). As a result, dice reef installed Pohang coast appeared to mostly stable.