• Animal Bioscience
• /
• v.37 no.3
• /
• pp.451-460
• /
• 2024

Objective: The objective is to identify genomic regions and candidate genes associated with age to 105 kg (AGE), average daily gain (ADG), backfat thickness (BF), and eye muscle area (EMA) in Yorkshire pig. Methods: This study used a total of 104,380 records and 11,854 single nucleotide polymorphism (SNP) data obtained from Illumina porcine 60K chip. The estimated genomic breeding values (GEBVs) and SNP effects were estimated by single-step genomic best linear unbiased prediction (ssGBLUP). Results: The heritabilities of AGE, ADG, BF, and EMA were 0.50, 0.49, 0.49, and 0.23, respectively. We identified significant SNP markers surpassing the Bonferroni correction threshold (1.68×10^-6), with a total of 9 markers associated with both AGE and ADG, and 4 markers associated with BF and EMA. Genome-wide association study (GWAS) analyses revealed notable chromosomal regions linked to AGE and ADG on Sus scrofa chromosome (SSC) 1, 6, 8, and 16; BF on SSC 2, 5, and 8; and EMA on SSC 1. Additionally, we observed strong linkage disequilibrium on SSC 1. Finally, we performed enrichment analyses using gene ontology and Kyoto encyclopedia of genes and genomes (KEGG), which revealed significant enrichments in eight biological processes, one cellular component, one molecular function, and one KEGG pathway. Conclusion: The identified SNP markers for productive traits are expected to provide valuable information for genetic improvement as an understanding of their expression.

• Journal of Korea Foundry Society
• /
• v.35 no.5
• /
• pp.109-113
• /
• 2015

In this study, the measurement of FN (ferrite volume fraction) and the solution annealing ratio at a temperature of $1130^{\circ}C$ were determined with 15A elbow fittings of shell cast SSC13, and the corrosion resistance with and without austenitizing solution annealing were investigated in comparison with AISI304. The delta ferrite phase was observed in the material due to the slow cooling effect of the shell mold casting. However, the delta ferrite phase decreased gradually with the solution annealing at a temperature of $1130^{\circ}C$. The hardness generally decreased with a heat treatment; however, its corrosion resistance was improved with the heat treatment. In addition, when a passivation treatment was applied, its corrosion ratio showed the lowest value. The pattern of general corrosion decreased due to the decrease in the delta ferrite phase with the solution annealing treatment. Consequently, it is suggested that the corrosion resistance of SSC13 elbow fittings can be improved by increasing the ratio of any solution annealing treatment used and by decreasing the ferrite phase. The relationship between the ratio of solution annealing and delta ferrite is expressed as follows: SA (solution annealing ratio,%) = 98 - FN (ferrite volume fraction, %).

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1386-1390
• /
• 2002

In aiming to identify the genes or genetic regions responsible for quantitative traits, a swine reference population had been constructed using three Large White boars and seven Meishan dams as parents. Five $F_1$ males and 23 $F_1$ females were intercrossed to generate 147 $F_2$ offspring. Thirty-one microsatellite markers covering Sus scrofa chromosomes (SSC) 2, 4, 6 and 7 were genotyped for all members. Construction of genetic microsatellite maps was performed using the CRIMAP software package. The lengths of these chromosomes were longer than MARC maps. They were 158.6cM, 180.3cM, 197.3cM and 171.4cM, respectively. A two modified orders of markers were observed for SSC6 and SSC7. The female map on SSC6 was shorter than male map, and the contrary was on SSC 2, 4 and 7.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.5
• /
• pp.516-523
• /
• 2011

To compare four populations of sea squirt Halocynthia roretzi adults, their egg quality and larval development were investigated in the hatchery. The populations were: south sea wild (SSW), south sea cultured (SSC), east sea wild (ESW) and Iwate Japan cultured (IJC). Egg quality and larval development were compared using 13 factors (fertilization rate and diameter, proximate composition, amino acid and fatty acid contents of eggs, hatching rate and various sizes of tadpole larvae) which were obtained from each population. Fertilized egg diameter, hatching rate and size of tadpole larvae were significantly different among the four populations (P<0.05). Eggs were produced with higher crude protein ($5.20{\pm}0.00%$ SSW, $4.71{\pm}0.01%$ ESW, $4.66{\pm}0.01%$ SSC and $3.96{\pm}0.01%$ IJC) and lipid ($1.22{\pm}0.01%$ ESW, $1.01{\pm}0.00%$ SSW, $0.77{\pm}0.01%$ SSC and $0.69{\pm}0.00%$ IJC,) contents from domestic wild populations than from Japanese or cultured populations. Also amino acid and fatty acid contents were different. The extent of similarity between domestic and Japanese populations (30.5% IJC:SSW, 34.3% IJC:SSC and 40.7% IJC:ESW) was relatively low but was very high between SSW and SSC (73.9%). These results may have been due to differences in the abundance of food types and environmental conditions in the four localities and consequent differences in the diets of the sea squirts.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.437-440
• /
• 2009

We propose a fast stream cipher ASC16 for software implementation. ASC16 has a very simple structure with ASR(Arithmetic Shift Register), NLF(Non-Linear Filter), and NLB(Non-Linear Block), and is executed by a word. It is a stream cipher for wireless communication, which makes 32bit key streams using s-box with non-linear transformation. The processed result is almost same as SSC2, 32bit output stream cipher, developed by Zhang, Carroll, and Chan. The period is longer than SSC2, and it causes the difficulty of Correlation attack and raises security very much. The proposed ASC16 is efficiently used in the process of a fast cipher in the limited environment such as wireless communication.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.1
• /
• pp.11-20
• /
• 2021

Decontamination of systems, structures and components (SSC) during the decommissioning of a Nuclear Power Plant (NPP) can be for a variety of reasons. The main reasons for decontamination are: to reduce the contamination of SSC to a reasonably low level, to reduce the potential for the spread of contaminants into the environment and to reduce the cost of disposal due to the reduced level of contamination in a particular SSC. The decontamination technique can be aggressive or non-aggressive depending on the intent after the decontamination process. Aggressive decontamination technique is used when the intent is not to reuse the SSC while a non-aggressive decontamination technique is used with the intent of SSC reuse. For different SSCs there are different decontamination techniques that can be used, each having its own advantages and drawbacks. Metal components such as pipes in the nuclear power plant account for a large amount of nuclear wastes generated. Some of these wastes can be reused if the contaminant level is reduced to an acceptable level. Laser ablation is a non-aggressive decontamination technique that can be used to reduce the contamination in pipes to an acceptable level with no secondary waste generated during the process. The operation and control of a laser ablation device must be precise to achieve a high decontamination factor. This precision can be achieved by a well-designed motion control system. For this purpose, a motion control system was developed consisting of two parts: the first part being the precise control of the laser ablation device inside the pipe and the second part is the control of the laser ablation device outside the pipe. This paper describes the Systems Engineering approach for the development process of a motion control system for the Laser decontamination system.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.47-54
• /
• 2020

Integration of active and passive waveguides is an essential component of the photonic integrated circuit and its elements. Butt joint is one of the important technologies to accomplish it with significant advantages. However, it suffers from high optical loss at the butt joint junction and need of accurate process control to align both waveguides. In this study, we used beam propagation method to simulate an integrated device composed of a laser diode and spot size converter (SSC). Two SSCs with different mode properties were combined with laser waveguide and optical coupling efficiency was simulated. The SSC with larger near field mode showed lower coupling efficiency, however its far field pattern was narrower and more symmetric. Tapered passive waveguide was utilized for enhancing the coupling efficiency and tolerance of waveguide offset at the butt joint without degrading the far field pattern. With this technique, high optical coupling efficiency of 89.6% with narrow far field divergence angle of 16°×16° was obtained.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.542-547
• /
• 1997

In the SSC(Super System Code), the reactivity feedback models of the Doppler effect and fuel axial expansion were modified to evaluate the safety performance of the metal-fueled core. The core radial expansion model was developed and implemented into the code as well. The transient analyses have been performed by the modified SSC for UTOP, ULOHS, ULOF/LOHS, and UTOP/LOF/LOHS events for one of the core design options being considered. Analysis results shows that the reactivity feedbacks can provide an inherent shutdown capability in response to key anticipated events without scram. Development of other reactivity feedback models and validation of these models against experimental data would make the SSC suitable for the assessment of the metal-fueled core safety performance.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.388-389
• /
• 2017

본 논문에서는 효율적인 에너지 관리를 위해 리튬이온 배터리를 적용 능동 셀 밸런싱 시스템 BMS에 대해 제안하였다. 제안된 방법은 다수의 셀과 하나의 커패시터로 구성된 SSC(Single Switched Capacitor) 방식에서 사용되는 커패시터를 리튬이온 배터리로 변경하여 적용한 것이다. SSC 방식은 커패시터의 방향성으로 인하여 홀수 번째와 짝수 번째의 배터리에 대해 별도의 스위치를 설치하여야 하며 조작이 복잡하다는 단점을 가지고 있었다. 이러한 단점을 보완하여 커패시터를 리튬이온 배터리로 대체하여 셀의 순서에 상관없이 적용이 가능한 셀 밸런싱 방법을 제안하였다. 제안된 방법의 효율성은 BMS를 구현하여 실험 하였다. 실험 결과 셀 밸런싱이 기존의 SSC 방식보다 개선되어 효율성이 입증되었다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.139-142
• /
• 2013

A study was carried out to evaluate the solid phase micro-extraction (SPME) for formaldehyde emission analysis of uncoated plywood. In SPME, formaldehyde was on-fiber derivatized through headspace extraction and analyzed by gas chromatography coupled with mass spectrometry (GC/MS). The SPME was compared with desiccators (DC-JAS 233), small-scale chamber (SSC-ASTM D6007) and liquid-liquid extraction (LLE-EPA 556) methods which were performed in accordance with their respective standards. Compared to SSC (RSD 4.3%) and LLE (RSD 5.0%), the SPME method showed better repeatability (RSD 1.8%) and not much difference from DC (RSD 1.4%). The SPME has proven to be highly precise (at 95% confidence level) with better recovery (REC 102%). Validation of the SPME method for formaldehyde quantitative analysis was evidenced. In addition, the SPME by air sampling directly from plywood specimens (SPME-W) correlated best with DC ($r^2$ = 0.983), followed by LLE ($r^2$ = 0.950) and SSC ($r^2$ = 0.935).