• Korean Journal of Medicinal Crop Science
• /
• v.15 no.2
• /
• pp.132-137
• /
• 2007

Inhibitory effect of Scutellaria baicalensis ethanol extracts (SR) on chemical mediator release and immunoglobulin (Ig) production from Sprague-Dawley rats originated cells as type I allergic reaction was examined. SR showed concentration-dependent inhibition on basal and concanavalin A (ConA)-stimulated Ig production. In the mesenteric lymph node lymphocytes, the inhibitory effect of SR on the IgE production in the presence of Con A was stronger than these on IgA and IgG production. Moreover, tumor necrosis factor-alpha $(TNF-{\alpha})$ production-inhibiting effect of SR in the presence ConA was observed. However, SR did not affect the production of $interferon-{\gamma}$. SR also inhibited histamine release from the peritoneal exudate cells stimulated with a calcium ionophore A23187. In the case of leukotriene B4, SR markedly inhibited it at the concentration of 100 mg/ml. From these results, ethanol extracts obtained from Scutellaria baicalensis may have an anti-allergic effect on the intestinal system of rats.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.584-588
• /
• 2019

The catalytic combustion of particulate matter (PM) is one of the key technologies to meet emission standards of diesel engine system. Therefore, we herein suggest Ag loaded $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3$ perovskite web catalyst. They were produced by the electrospinning method. FE-SEM, EDS mapping, XRD, XPS were studied to investigate the crystal and morphological structures of loaded Ag particles and $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3$ perovskite web catalyst. Following the catalytic soot oxidation, we found that the Ag loaded $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3$ perovskiteweb catalyst showed the higher catalytic activities (e.g., $T_{50}=490^{\circ}C$) than the only $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3$ perovskite web catalyst (e.g., $T_{50}=586^{\circ}C$). Thus, this finding suggests that Ag loaded $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3$ perovskite web catalyst can be a promising candidate for enhancing the soot oxidation.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.600-603
• /
• 1995

A series of samples in the Sm1-xSrxCoO3-y(x=0.00, 0.25, 0.50, 0.75 and 1.00) system has been prepared at 1200 ℃ under ambient atmosphere. The X-ray diffraction patterns of the samples with x=0.00 and 0.25 are indexed with orthorhombic symmetry like GdFeO3 and x=0.50 appears to be perfectly cubic. In the tetragonal system (x=0.75), the structure is similar to that of SrCoO2.80. The composition of x=1.00, SrCoO2.52, shows the brownmillerite-type structure. The reduced lattice volume is increased with x value in this system. The chemical analysis shows the τ value (the amount of the Co4+ ions in the system) is maximized at the composition of x=0.50. Nonstoichiometric chemical formulas are determined by the x, τ and y values. The electrical conductivity has been measured in the temperature range of 78 to 1000 K. The activation energy is minimum for those of x=0.25 and x=0.50 with metallic behavior. First-order semiconductor-to-metal transition of SmCoO3 is not observed. Instead, a broad, high-order semiconductor-to-metal transition is observed. In general, the effective magnetic moment is increased with increasing τ values at low temperature. At high temperature, the magnetic moment is maximum for that of x=0.00. The 3d-electrons are collective and give ferromagnetism in x=0.50.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2987-2997
• /
• 2011

As a public transit playing an important role in the era of high gas prices, subway corresponds the national strategy 'Low carbon, Green growth'; accordingly, passengers who would use the transportation are steadily increasing. Subway operators are required to provide subway users with services based on higher-quality system, safety, convenience & high reliability level. Furthermore, as the legally allowed maximum life time of EMUs is extended, it is necessary to localize & standardize the parts of EMUs. This paper presents a modelling of systematic EMU(SR001) manufacturing technique which enables us to reflect passenger and subway operator's demands in the whole EMU manufacturing process from the initial design phase to its completion by making full use of the know-how based on subway operators' experiences. SR001 enabled SMRT's staffs to participate in the EMU design & its equipment manufacturing; consequently, it realized the innovative system which meets passengers' requirements. Moreover, the process lead time was reduced dramatically. The result of this research will be helpful in providing useful guidelines for railway industry policy and development making in Korea.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.849-854
• /
• 2003

Temperature dependent thermoelectric power (TEP) of La$_{2.1}$ Sr$_{1.9}$ Mn$_3$O$_{10}$ system has been studied in the temperature range 80-373 K. In the low temperature ferromagnetic regime, TEP (S) follows an expression of formS＝S$_{0}$ ＋S$_{1.5}$ T$^{1.5}$ ＋S$_4$T$^4$ over the wide range of temperature. The broad peak below the ferromagnetic transition and complicated temperature dependence of S may be understood on the basis of electron-magnon scattering as predicted for an itinerant ferromagnet. High temperature TEP data can be well fitted with Mott's small polaron hopping model.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.2
• /
• pp.27-33
• /
• 2001

In this thesis, we present a simple and efficient recovery method, called ARIES/SR(ARIES/Selective Redo) which is based on ARIES(Algorithm for Recovery and Isolation Exploiting Semantics) ARIES performs redo for all updates done by either nonloser transaction or loser transaction, and thus significant overhead appears during restart after a system failure. To reduce this overhead, we propose ARIES/SR recovery algorithm. In this algorithm, to reduce the redo operations, redo is performed, using log record for updates done by only nonloser transaction. Also selective undo is performed. using log record for update done by only loser transaction for reducing recovery operation.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.118-121
• /
• 1998

In this paper, we propose another paradigm(QNBP) to be capable of overcoming Limitations of the traditional backpropagation(SDBP). QNBPis based on the method of Quasi -Newton(variable metric) with the nomalized direction vectors and computes step size through the linear search. Simulation results showed that QNBP was definitely superior to both the stochasitc SDBP and the deterministic SDBP in terms of accuracy and rate of convergence and might sumount the problem of local minima. and there was no different between DFP+SR1 and BFGS+SR1 combined algrothms in QNBP.

• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.128-132
• /
• 2009

Polycrystalline samples of $(Ru_{0.8}Nb_{0.2})Sr_2(Gd_{1.5-x}Nd_xCe_{0.5})Cu_2O_z$($ 0{\leq}x{\leq}1.25$) have been synthesized by a solid-state reaction route. The X-ray diffraction data revealed that the Nd solubility limit can be placed between x=0.5 and x=0.75. The superconducting transition temperature decreased with increasing Nd content, confirming that Nd entered the lattice. Room-temperature thermoelectric power measurements showed that all the samples are in the underdoped state and the partial substitution of Nd for Gd resulted in a decrease in the carrier density on the superconducting layers.

• Journal of Applied Reliability
• /
• v.16 no.3
• /
• pp.171-179
• /
• 2016

Purpose: The purpose of this study is to provide a comparison of reliability prediction models between MIL-HDBK-217F and Telcordia SR-332 and to analyze the reliability prediction results. Methods: The reliability of industrial tablet PC was predicted using MIL-HDBK-217F and Telcordia SR-332. To analyze the results, sensitivity analysis was conducted. Results: The reliability of MIL-HDBK-217F was predicted lower than the one of Telcordia SR-332. Considering the factors such as temperature, quality and environment, those provided reliability change of a particular part which highly contribute to the system failure. Conclusion: It is necessary to design the industrial tablet PC that consists of integrated circuits such as microprocessor and memory considering the operating temperature and quality factors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.938-941
• /
• 2000

SrBi$_2$Ta$_2$$O_{9}$(SBT) thin films were etched in Ar/SF$_{6}$ and Ar/CHF$_3$gas plasma using magnetically enhanced inductively coupled plasma(MEICP) system. The etch rates of SBT thin film were 1500$\AA$/min in SF$_{6}$/Ar and 1650 $\AA$/min in Ar/CHF$_3$at a rf power of 600W a dc-bias voltage of -l50V. a chamber pressure of 10 mTorr. In order to examine the chemical reactions on the etched SBT thin film surface , x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS) were examined. In etching SBT thin film with F-base gas plasma, M(Sr. Bi. Ta)-O bonds are broken by Ar ion bombardment and form SrFand TaF$_2$ by chemical reaction with F. SrF and TaF$_2$are removed more easily by Ar ion bombardmentrdment