• Korean Journal of Materials Research
• /
• 제33권6호
• /
• pp.242-250
• /
• 2023

Titanium, which has excellent strength and toughness characteristics, is increasingly used in the aerospace field. Among the titanium alloys used for body parts, more than 80 % are Ti-6Al-4V alloys with a tensile strength of 931 MPa. The spark plasma sintering (SPS) method is used for solidification molding of powder manufactured by the mechanical milling (MM) method, by sintering at low temperature for a short time. This sintering method avoids coarsening of the fine crystal grains or dispersed particles of the MM powder. To improve the mechanical properties of pure titanium without adding alloying elements, stearic acid was added to pure titanium powder as a process control agent (PCA), and MM treatment was performed. The properties of the MM powder and SPS material produced by solidifying the powder were investigated by hardness measurement, X-ray diffraction, density measurement and structure observation. The processing deformation of the pure titanium powder depends on the amount of stearic acid added and the MM treatment time. TiN was also generated in powder treated by MM 8 h with 0.50 g of added stearic acid, and the hardness of the powder was higher than that of Ti-6Al-4V alloy when treated with MM for 8 h. When the MM-treated powder was solidified in the SPS equipment, TiC was formed by the solid phase reaction. The SPS material prepared as a powder treated with MM 8 h by adding 0.50 g of stearic acid also formed TiN and exhibited the highest hardness of Hv1253.

• Journal of the Korea Concrete Institute
• /
• 제18권5호
• /
• pp.687-693
• /
• 2006

The Stone Powder Sludge(below SPS) is the by-product from the process that translates stone power of 8mm under as crushed fine aggregate. It is the sludge as like cake that has average particle size of $7{\mu}m$, absorbing water content of 20 to 60%, and $SiO_2$ content of 60% over. Because of high water content of SPS, it is not only difficult to handle, transport, and recycle, but also makes worse the economical efficiency due to high energy consuming to drying. This study is aim to recycle SPS as it is without drying. Target product is the lightweight foamed concrete that is made from the slurry mixed with pulverized mineral compounds and foams through hydro-thermal reaction of CaO and $SiO_2$. Although in the commercial lightweight foamed concrete CaO source is the cement and $SiO_2$ source is high purity silica powder with $SiO_2$ of 90%, we tried to use the SPS as $SiO_2$ source. From the experiments with factors such as foam addition rate and replacement proportion of SPS, we find that the lightweight foamed concrete with SPS shows the same trends as the density and strength of lightweight foamed concrete increases according to decrease of foam addition rate. But in the same condition, the lightweight foamed concrete with SPS is superior strength and density to that with high purity silica. This trends is distinguished according to increase of replacement proportion of SPS, also the analysis of XRF shows that the hydro thermal reaction translates SPS to tobermorite. Although SPS has low $SiO_2$ contents, the lightweight foamed concrete with SPS has superior strength and density, because it reacts well with CaO due to extremely fine particles. We conclude that it is possible to replace the high purity silica as SPS in the lightweight foamed concrete experimentally.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• 제23권6호
• /
• pp.314-319
• /
• 2013

Fabrication of nanocomposite material for the $Fe_2O_3-Al$ system by mechanical alloying (MA) has been investigated at room temperature. It is found that ${\alpha}-Fe/Al_2O_3$ nanocomposite powders in which $Al_2O_3$ is dispersed in ${\alpha}-Fe$ matrix are obtained by mechanical alloying of $Fe_2O_3$ with Al for 5 hours. The change in magnetization and coercivity also reflects the details of the solid state reduction process of hematite by pure metal of Al during mechanical alloying. Densification of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $1000^{\circ}C$ and $1100^{\circ}C$ under 60 MPa. Shrinkage change after SPS of MA'ed sample for 5 hrs was significant above $700^{\circ}C$ and gradually increased with increasing temperature up to $1100^{\circ}C$. X-ray diffraction result shows that the average grain size of ${\alpha}-Fe$ in ${\alpha}-Fe/Al_2O_3$ nanocomposite sintered at $1100^{\circ}C$ is in the range of 180 nm. It can be also seen that the coercivity (Hc) of SPS sample sintered at $1000^{\circ}C$ is still high value of 88 Oe, suggesting that the grain growth of magnetic ${\alpha}-Fe$ phase during SPS process tend to be suppressed.

• The Journal of Korean Academy of Sensory Integration
• /
• 제20권2호
• /
• pp.36-45
• /
• 2022

Objective : The objective of this study was to determine a discriminat validity of the Sensory Processing Scale-Children (SPS-C) for children with and without Sensory Processing Disorder (SPD). Method : The SPS-C was completed by parents of 151 Korean children including 68 typically developing children (control group), 83 children with SPD (known group) in the age range 3-5 years, in South Korea. ANCOVA with sex as covariable was used to identified the difference between the children with typically development and SPD. Results : Sensory processing differences in sensory domains and sensory factors were detected and the gender differences were not effective between typically developing children and children with SPD. Significant differences were found in all sensory domain score and total score except proprioceptive processing in sensory domain. In sensory factors, significant differences were found in overrsensitivity, underresponsivity, and discrimination, but sensory seeking was not significant. SPS-C was a valid assessment tool to identify or screen of SPD in Korea. Conclusion : The psychometric characteristics for the standardization study of SPS-C were presented, and the discriminant validity to screen the children with sensory processing problems was presented as a verified evaluation tool. SPS-C will be helpful in screening, analyzing and interpreting characteristics of sensory processing, and establishing an intervention plan.

• Journal of Korea Soil Environment Society
• /
• 제1권1호
• /
• pp.47-54
• /
• 1996

Soil pollution indices (SPI) were designed for estimating quality of soil polluted with arsenic and heavy metals. Applying the quality reference value of soil based on its multifunctional purpose was a key step. For considereing multifunctions of soil, soil was classified into 4 groups-agricultural land, residential area, recreational area, factorial site. Then, each concentration of arsenic and each of five heavy metals (Cd, Cu, Hg, Pb, Zn) in soils grouped was transformed to a mathematical value based on the soil quality reference value which may stand for ecological impact. Soil pollution score (SPS) was the addition of the 6 values transformed, and the range of the SPS was divided into 4 Soil Pollution Classes (SPC). The SPC 1, 2, 3, and 4 were SPS <100, SPS 100-200, SPS >200-300, and SPS >300, repectively. SPS and SPC were evaluated with the results of the data from employing the Soil Network of 1994. Based on the soil quality reference values, SPS and SPC of the Soil Network's data were transformed and classified, respectively. Then, SPS and SPC were compared with arsenic and the 5 heavy metal contents of their reference values resulted from the Soil Network's. From this method, soil quality of most of the Soil Network area was estimated to be healthy. However, ca. 3.0~4.0% of the Soil Network area was determined in a range of slightly and heavily polluted. As the mean value of SPS of the Soil Network's was 66.2 which indicates most of soil evaluated was healthy. When the SPSs of the data were divided into 4 groups of SPC, Class 1 (Good quality of soil), Class 2 (Need to be checked area 1), Class 3 (Need to be checked area 2) and Class 4 (Polluted area) were 87.0, 9.4, 2.4, 1.2%, respectively. Using SPI were comparable to those of heavy metal contents in soils, and would be comprehenve to determine the status of soil qulity. Methodology of the developing SPI would be applicable to the other soil pollutants such as organic and inorganics than arsenic and 5 heavy metals used here.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 한국분말야금학회 2004년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.57-58
• /
• 2004

• Proceedings of the Korean Ceranic Society Conference
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.65.2-65
• /
• 2003

• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2004년도 춘계학술발표대회 및 제6회 신소재 심포지엄
• /
• pp.42-42
• /
• 2004

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• 제23권3호
• /
• pp.135-141
• /
• 2013

Mechanical alloying was carried out to produce $CrSi_2$ thermoelectric compound using a mixture of elemental $Cr_{33}Si_{67}$ powders. An optimal milling and heat treatment conditions to obtain the single phase of $CrSi_2$ compound with fine microstructure were investigated by X-ray diffraction and differential scanning calorimetry measurement. $CrSi_2$ intermetallic compound with a grain size of 70 nm could be obtained by MA of $Cr_{33}Si_{67}$ powders for 70 hours and subsequently annealed at $650^{\circ}C$. Consolidation of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $600{\sim}1000^{\circ}C$ under 60 MPa. The shrinkage of MA samples during SPS consolidation process increased gradually with increasing temperature up to $1000^{\circ}C$ and relatively significant at about $600^{\circ}C$. We tend to believe that these behaviors are deeply related to form a $CrSi_2$ compound during heating process, as can be realized from the DSC measurement. Electrical conductivity and Seebeck coefficient of sintered bodies were measured up to $900^{\circ}C$. Seebeck coefficient and power factor of $Cr_{33}Si_{67}$ compact prepared by MA and SPS at $1000^{\circ}C$ showed the maximum value of $125{\mu}V/K$ at $400^{\circ}C$ and $4.3{\times}10^{-4}W/mK^2$ at $350^{\circ}C$, respectively.

• The Journal of Korean Academy of Sensory Integration
• /
• 제13권2호
• /
• pp.31-41
• /
• 2015

Objective : Purpose of this study is to develop a Sensory Processing Scale for Children (SPS-C) to screen sensory processing problems for children aged 3 to 5, and examine validity of the assessment. Method : A draft version of Sensory Processing Scale for Children (SPS-C) has been developed and it was utilized to 138 caregivers of children who are 3 to 5 years old. Rasch analysis was used to test construct validity of SPS-C. Through the Rasch analysis, unidimensionality and adequacy of the rating scale were examined. Results : Based on the Rasch analysis, it was found that six items out of 56 items (10.7%) are misfits. And the results also showed that 3-points rating scale is more adequate than 5-points scale for SPC-C. Conclusion : The construct validity of a newly developed assessment, Sensory Processing Scale for Children (SPS-C), was established through this study. Further studies are needed to examine other psychometric properties of the assessment, using the one modified based on the results in this study.