• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.54-59
• /
• 1999

The KITSAT-3, launched on May 26th of 1999, is equiped with a high-resolution earth-watch sensor that has spectral bands similar to that of the SPOT. In this paper, the primary discussion is on Investigation of possible application of images acquired from this sensor The secondary discussion is on the comparison of the images with those of Landsat TM and SPOT.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.3
• /
• pp.255-260
• /
• 2003

In this paper, we generate the 3D geometric sensor model of SPOT-5 HRG stereo images which are processed in Supermode and have 2.5m ground spatial resolution, and calculate the RPC(Rational Polynomial Coefficients) for acquisition of topographic information using the exterior orientation parameters which are determined in the 3D geometric sensor modelling process. It is shown that SPOT-5 images can be modelled with me 3.3m accuracy by the bundle adjustment method used to model the existing SPOT series. Considering the accuracy of RPC's results with rmse 0.03m accuracy, the RPC model can replace the sensor model, if we emphasize the simplification and the cost.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.3
• /
• pp.168-175
• /
• 2006

The cultural grounds of lave r have been surveyed using SPOT-5 satellite images. The facilities of laver cultivation area in the coastal waters of Korea were calculated. 10 m resolution multispectral images of SPOT-5 are adopted for the southern are a of Jebu Island, Hwaseong city to develop an automatic detection approach of laver nets that consists of the following: band difference technique, canny edge detector and morphological analysis: The number of satellite-based facilities was relatively high as compared with the licensed number in 2005, 676,749 chaek and 572,745 chaek(柵, unit of measure for laver farm), respectively. The ratio of a law abiding facility was very low at 52.9%. These data could be applied to control its national production keeping a stable market price for the government body.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.215-224
• /
• 2007

The classification of the satellite images is basic part in Remote sensing. In classification of the satellite images, class separability feature is very effective accuracy of the images classified. For improving classification accuracy, It is necessary to study classification methode than analysis of class separability feature deciding classification probability. In this study, IKONOS, SPOT 5, Landsat TM, were resampled to sizes 1m grid. Above images were calculated the class separability prior to the step for classification of pixels. This Study concludes, each image was measured by the rate of class separability, values classified were showed highly about $1,600{\sim}2,000$.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.121-128
• /
• 2014

This study investigated the accuracy of DEM generated by heterogeneous stereo satellite images based on RPC. Heterogeneous sensor images with different spatial resolution are SPOT-5 panchromatic and IKONOS images. For the accuracy evaluation of the DEM, we compared the DEMs generated from two kinds of sensors and that produced using homogeneous SPOT-5 and IKONOS stereo images. As results of the evaluation, accuracy of 3D positioning by heterogeneous images was substantially similar to that of homogeneous stereo images for exact conjugate points. But, in terms of quality of the DEM, DEM generated by heterogeneous sensor showed a lower accuracy about twice in RMSE and about 3 times in LE90 than that of homogeneous sensors. As a result, DEM can be generated by using heterogenous satellite imagery. But if we use a stereo image with different spatial resolution, the performance of image matching was very important factor for the production of high-quality DEM.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.61-69
• /
• 2009

By the advent of the high resolution satellite imagery, a ground-coverage included by a single satellite image is decreased. By the reason, there are increasing needs in image mosaicking technology to use images to various GIS fields. This paper describes an edge-based seamline extraction algorithm using edge information such as rivers, roads, buildings for image mosaicking. For this, we developed a method to track and link discontinuous edges extracted by edge detection operator. To estimate the effectiveness of the proposed algorithm, we applied the algorithm to IKONOS, KOMPSAT-1 and SPOT-5 satellite images. The experimental results showed that the algorithm successfully dealts with discontinuities caused by geometric differences in two images.

• Journal of Korea Water Resources Association
• /
• v.38 no.11
• /
• pp.927-935
• /
• 2005

Soil erosion by rainfall is important factor for basin management because it reduces reservoir capacity and breaks out the contamination of water caused by turbid water. Recently, soil erosion study with GIS is in progress but does not consider soil erosion source area. This study calculated soil erosion amount using GIS-based soil erosion model in Imha basin and examined soil erosion source area using SPOT 5 High-resolution satellite image and land cover map. As a result of analysis, dry field showed high-density soil erosion area and we could easily investigate source area using satellite image. Also we could examine the suitability of soil erosion area by applying field survey method in common areas such as dry field and orchard area those are difficult to confirm soil erosion source area using satellite image.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.1
• /
• pp.39-47
• /
• 2014

In this study, the epipolar images were created by both methods of resolution adjustment and piecewise approach using RPC(Rational Polynomial coefficients) and ancillary data of IKONOS-2 and SPOT-5 satellite images whose resolutions are different from each other. The stereo geometry of these two satellite images was analyzed and the RPC block modelling was accomplished for generating epipolar images. In order to evaluate the accuracy of created epipolar images, the y-parallaxes were analyzed for the specific points which were apparently identified in mountainous, plain and urban area. Also the RMSEs of the specific points were calculated using the coordinates from the epipolar stereo images and the coordinates from the block triangulation. Y-parallaxes were within one pixel and the RMSEs were within two meters for X, Y and Z each.

• Korean Journal of Remote Sensing
• /
• v.25 no.5
• /
• pp.445-454
• /
• 2009

Localized unprecedented torrential rain and heavy rainfall cause repeated damages and make it difficult to detect and predict the landslide caused by heavy rainfall. To analyze the landslide characteristics of Inje area this study used satellite images photographed after the occurrence of landslide caused by the typhoon Ewiniar occurred in July, 2006, and for GIS analysis purpose, interpreted the satellite images (SPOT5) visually to digitize into developing parts, water traveling parts and sediment parts. For analysis of spatial characteristics, landslide areas obtained from visual interpretation of digital map, 3rd & 4th forest vegetation maps and detailed soil map and grids were overlaid and analyzed. As a result, in regard to topographic features, landslide occurred at places, of which average slope is $26.34^{\circ}$, had south, south-east, south-west aspects and average altitude of 627m. From hydrological analysis, it was found out that water traveling area rapidly spread approaching water traveling area and sediment area. From forest type analysis, it was found out that landslide occurrence was high in pine woods, and in terms of girth class attribute, landslide occurred in small-sized woods, in which the crown occupancy of trees that have the diameter at breast height, 6~16cm, was greater than 50%. From the analysis of soil series, landslide areas constitute 37.85% of OdF and 37.35% of SmF, which had sandy loam soil and excellent drainage capacity. Through this study, landslides in Inje area were characterized and SPOT5 images of 2.5m resolution could be used. But there was a difficulty in determining water traveling parts adjacent to urban area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.2
• /
• pp.193-199
• /
• 2011

It is necessary to register precisely Digital Elevation Model (DEM) generated from SPOT -5 stereo images in order to monitor the topographic and environmental changes of important topographic features such as Mt. Baekdu. The SPOT-5 DEM is registered taking SRTM DEM as a reference DEM. If SPOT-5 DEM is transformed with single 3D rigid equation, it has many errors. Therefore, this study extracted uniformly ground control points over study area and estimated locally adapted transformation equation. The accuracy of proposed method was evaluated with comparison to scale-based and GCP-based transformation method.