• Tuberculosis and Respiratory Diseases
• /
• v.59 no.4
• /
• pp.406-412
• /
• 2005

Background : Recently, two commercialized whole-blood assays, $QuantiFERON^{(R)}-TB$ Gold (QFT) and T $SPOT-TB^{(R)}$ (SPOT), which measure the $IFN-{\gamma}$ released in the whole blood after being incubation with mycobacterial antigens, were approved for the diagnosis of a latent tuberculosis infection (LTBI). However, there is data on whether or not the previously used PPD skin tests (TST) have any influence on the diagnostic ability of these ex-vivo $IFN-{\gamma}$ assays. Methods : Forty-six 15 year-old students who did not appear to be infected with Mycobacterium tuberculosis were enrolled in this study. The peripheral blood was collected and used for two $IFN-{\gamma}$ assays. The $IFN-{\gamma}$ assays and TST were performed at the baseline ($1^{st}$). The TST was repeated two months later ($2^{nd}$), and the $IFN-{\gamma}$ assays were repeated two ($2^{nd}$) and four months ($3^{rd}$) later only in those subjects who had negative results at the baseline in both the $IFN-{\gamma}$ assays and TST. An induration size > 10 mm was considered to be positive in the TST. Results : The mean TST value was $3.1{\pm}5.4mm$ (range: 0-20). Of the 46 subjects examined, 13 subjects (28.3%) showed positive results in the two-step TST. Nine (19.6%) were SPOT-positive and only one (2.2%) was QFT-positive. The $2^{nd}$ and $3^{rd}$ QFT were carried out in 23 and 25 all-negative subjects, respectively, and all showed negative results. The $2^{nd}$ SPOT was performed in 23 subjects and only one (4.3%) showed a weak-positive result. Conclusion : Even though there were some discrepancies in the results of the two ex-vivo $IFN-{\gamma}$ assays, it appears that their results were not influenced by a previous TST carried out in two or four months earlier.

• The Plant Pathology Journal
• /
• v.15 no.4
• /
• pp.242-246
• /
• 1999

Gloeocercospora sorghi caused the zonate leaf spot on sorghum (Sorghum bicolor Moench) in fields in Korea. The zonate spots were conspicuous on sorghum leaves as circular, reddish purple bands alternating with tan or straw-colored areas, which formed a coarsely zonate pattern. The lesions often occurred in semicircular patterns along the margin of leaves. The fungus produced sporodochia on the surface of infected leaves in a moist chamber. The conidia, born in a pinkish to salmon-colored slimy matrix, were hyaline, elongate to filiform, straight or slightly curved, 3- to 17-septate, and of variable lenght (28-197 x 1.6-$3.4\mu\textrm{m}$). G. sorghi isolated from diseased leaves of sorghum caused characteristic reddish-brown water-soaked leaf spots when inoculated to seedlings.

• Tribology and Lubricants
• /
• v.14 no.4
• /
• pp.29-36
• /
• 1998

The thermal characteristics of a disk such as temperature distribution, thermal behaviors and thermal stress during a braking operation has been analyzed for a high-speed brake using the finite element method. The maximum stress for a pad loaded against a disk was occurred at the trailing and leading edges of the disk pad at the underlayer-backplate interface. The FEM results indicate that the thermal characteristics of the spot type pad shows good performance compared with those of the flat type pad. Thus, the spot type pad in brake system may be recommended for the high-speed train system.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.219-221
• /
• 2006

In an attempt to optimize friction spot joining process of Al alloys for automobiles, Friction spot joining was used make lap feint on strips of AA5052-H32 and AA6022-T4 aluminium alloy. The effects of joining parameters such as tool rotating speed, plunging depth, joining time and kind of upper plate on the joints properties were investigated. An optimal tensile shear strength parameter of a tool rotating speed of 1000rpm, dwell time 2.5sec with upper plate 6022 can be found to make a good joint.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.662-670
• /
• 2001

We evaluate the effectiveness and validity of J(sub)e, which comprehensively describes the effects of specimen geometry and loading type, in predicting the fatigue life of auto seat belt anchor panel. We first simplify the heat affected zone model to reduce the number of finite elements. We then establish finite element models reflecting the actual overload behavior of 3 types of seat belt anchor specimens. Using finite element models elaborately established, we obtain the effective crack driving parameter J(sub)e composed of its ductility-dependent modal components. It is confirmed that the J(sub)e concept successfully predicts the fatigue life of multi-spot welded panel structures represented by auto seat belt anchors here.

• Mycobiology
• /
• v.41 no.3
• /
• pp.167-169
• /
• 2013

Black spot of sweet persimmon, caused by Alternaria alternata, occurred in an orchard in Gyeongnam province, Korea in 2012. The symptom was appearance of 0.5 to 4 cm black spots on the surface of fruit. The pathogen was isolated from flesh of disease lesions. The causal agent was identified as A. alternata by morphological characteristics and sequencers of the internal transcribed spacer (ITS) 1 and ITS4 regions of rRNA. Artificial inoculation of the pathogen resulted in development of disease symptoms and the re-isolated pathogen showed characteristics of A. alternata.

• Korean Journal of Materials Research
• /
• v.14 no.4
• /
• pp.239-245
• /
• 2004

Resistance spot weldability of coated steels for automobile applications was investigated. Test samples were prepared from commercial products of 0.8 mm in thickness. Based on the tensile-shear test, surface quality examination and cracking behavior, it was clear that aluminized steels showed good weldability. Microstructural inspection revealed that the coated materials was piled up at the split zone in the welding of aluminized steels. It was also demonstrated that no weld crack was found in the aluminized steel weld metal even the welding was carried out with higher current. However, through thickness cracks were detected at the weld metal of zinc coated steel. Small particles were found on the crack surface of zinc coated steel weld metal. It was thought that zinc vapor played key role to form the weld crack.

• Journal of Welding and Joining
• /
• v.27 no.4
• /
• pp.44-48
• /
• 2009

In automotive company, a lot of researchers have investigated for the spatterless welding process during last two decades. A spatter influences on the product quality such as strength and surface states. In this paper, a hollow tip is proposed for spatterless process. An optimal size of electrode hole is obtained from a weldability evaluation of each hole diameter. Through the cross section analysis, a phenomenon that molten metal moves in the hole which located between two workpiece is observed, and this makes spatterless welding process even though current is higher. Finally, widely acceptable weld area in lobe curve is obtained by using hollow tip as compare with conventional no hollow tip. In this paper, spatterless resistance spot welding with improvement weldability and productivity is proposed by using hollow tip.

• Journal of Welding and Joining
• /
• v.31 no.4
• /
• pp.17-22
• /
• 2013

The excellent beam quality of high power fiber lasers are commonly used for remote welding applications in body job applications. The Welding speed and productivity is unmatched with any other welding technology including resistance spot welding or traditional laser welding. High tooling cost for clamping and bulky safety enclosures are obstacles which are limiting the use. With the newly developed Laser stitch welding gun we have an integrated clamping in the process tool and the laser welding is shielded in a way that no external enclosure is needed. Operation of this laser welding gun is comparable with resistance spot welding but 2-times faster. Laser stitch welding is faster than spot welding and slower than remote welding. It is a laser welding tool with all the laser benefits like welding of short flanges, weld ability of Ultra High Strength steel, 3 layers welding and Aluminium welding. Together with low energy consumption and minimum operation cost of IPG fiber laser it is a new and sharp tool for economic car body assembly.

• Journal of The Korean Astronomical Society
• /
• v.34 no.2
• /
• pp.119-127
• /
• 2001

We have analyzed 210 data of daily sunspot observations made during the period of January 3 to December 31 in 2000 and presented the daily relative sunspot numbers. For this work we estimated the conversion factors to derive the relative sunspot numbers: k=0.72 for the 20 cm refractor and k=0.56 for Solar Flare Telescope in KAO. During the year of 2000, our annual average of relative sunspot numbers is found to be 99.4. This number is obtained from the averaged daily number of 8.9 spot groups, in which there are about 62.5 distinct spots observed. According to the appearance of 423 spot groups, our analysis shows that the mean life time of the spot groups is about 4 day and 12.0 hours.