• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.30-35
• /
• 2014

According to weight lightning trend of automobile body, necessity of resistance spot welding (RSW) of Mg alloy on automobile industry is increasing rapidly because of the highest specific strength among commercial metals. Mg alloy has low electric resistance and high thermal conductivity like as Al alloy, so that needs applying high current in short time when welding. Thick oxide film of Mg alloy pollutes the electrodes and makes partial current carrying paths when on welding. Partial current carrying paths signify excessive concentration of current. There can initiate expulsion easily and reduces electrode life rapidly. Generating partial current carrying paths and expulsions are influenced by shapes of electrode. Therefore, electrode life also influenced by shape. In this study, we perform life test of RSW electrode of radius type. Measure tensile shear load and nugget size every spot alternately. As a result, radius type electrode can extend life over twice as dome type electrode.

• 소성∙가공
• /
• 제22권4호
• /
• pp.189-195
• /
• 2013

In this study, the weld strength of extru-rivet spot welding was investigated by simulation and experiment. In order to obtain hot plasticity flow bonding of the two plates by a single rivet, electrodes are used for heating of the two plates and the rivet by electric resistance. Because weld strength is influenced by the temperature in the weld zone, the diameter of the electrodes and the amount of current supplied to the electrodes are important variables. For the simulation, heat distribution and weld strength were calculated using DEFORM-3D. The weld strength in the weld zone was calculated for various values of the experimental parameters. The simulation results showed that the weld strength was the highest when the weld current was 37kA, the electrode diameter was 12mm, and the welding frequency was 90cycle. Aluminum 5052 was used for the experimental study. A total of three aluminum plates, two welding plates with 1mm thickness and one plate with 2mm thickness for the inserting rivet, were used for the experimental extru-rivet spot welding.

• 대한공간정보학회지
• /
• 제14권4호통권38호
• /
• pp.61-70
• /
• 2006

본 논문에서는 SPOT 5호 HRG 스테레오 영상을 이용하여 수치표고모형을 생성하기 위한 사진측량학적 처리과정을 제시하고 수치표고모형 생성을 위한 HRG supermode 영상의 정확도 잠재성을 평가하고자 하였다. 센서모델링을 위하여 광속조정을 행한 후 에피폴라 영상재배열과 영상정합 과정 등을 통하여 수치표면모형을 생성하였다. HRG 영상으로부터 추출된 DEM 성과를 축척 1:5000의 수치지형도로부터 추출된 기준 DEM과 여러 시험구간 상에서 비교하였다. 전체구간 중 5m 미만의 DEM 오차를 나타내는 부분의 비율은 53.8%이었고, 5m를 초과하는 오차부분은 구름, 수역, 건물 등에 의한 영향을 받는 것으로 확인되어 이러한 지역을 제외하고 평가한 정확도는 약 2.5m의 RMSE를 나타내었다. 아울러 추출된 수치표면모형(DSM)을 사용하여 3차원 건물모델과 대상지역 전체의 3차원 가시화 모델을 작성하였다.

• 한국측량학회지
• /
• 제19권4호
• /
• pp.373-383
• /
• 2001

본 연구에서는 중해상도 위성영상으로 대표적인 SPOT, 아리랑, IRS-1C위성영상에 대하여 각기 하나의 입체모델을 이용한 지도제작 실험을 수행하였으며, 각각에 대한 위치정확도, 판독 및 묘사가능한 지형지물의 분석, 기존 수치지도와의 비교 등을 통하여, 제작가능한 지도축척의 범위에 대한 기술적인 검토 및 경제성 검토를 하였다. 도화작업에 있어서, SPOT 영상은 수치입체도화기를 사용한 3차원 도화를 하였으며, 아리랑 및 IRS-lC 위성영상은 데이터에 대한 시스템 지원상의 문제가 있어서 영상정합 방법으로 수치표고모형을 생성한 후 정사보정영상을 제작하여 head-up digitizing에 의한 2차원 도화를 실시하였다. 실험 결과 중해상도 영상으로 큰 도로, 하천, 수애선 등 일부 항목에 대하여 판독과 묘사가 가능하였지만, 불가능한 항목이 많았다. 지도제작 측면에서 SPOT은 1/50,000지형도 수정용, 아리랑 및 IRS-lC는 1/25,000지형도의 수정용으로 활용이 가능하다고 판단되었다.

• 한국약용작물학회지
• /
• 제22권5호
• /
• pp.398-404
• /
• 2014

Salt stress is one of the major abiotic stresses affecting the yield of ginseng (Panax ginseng C. A. Meyer). The objective of this study was to identify bio-marker, which is early responsive in salt stress in ginseng, using proteomics approach. Ginseng plants were exposed to 5 ds/m salt concentration and samples were harvested at 0, 6, 12 and 18 hours after exposure. Total proteins were extracted from ginseng leaves treated with salt stress using Mg/NP-40 buffer and were separated on high resolution 2-DE. Approximately $1003{\pm}240$ (0 h), $992{\pm}166$ (6 h), $1051{\pm}51$ (12 h) and $990{\pm}160$ (18 h) spots were detected in colloidal CBB stained 2D maps. Among these, 8 spots were differentially expressed and were identified by using MALDI-TOF/TOF MS or/and LC-MS/MS. Ethylene response sensor-1 (spot GL 1), nucleotide binding protein (spot GL 2), carbonic anhydrase-1 (spot GL 3), thylakoid lumenal 17.9 kDa protein (spot GL 4) and Chlorophyll a/b binding protein (spot GL 5, GL 6) were up-regulated at the 12 and 18 hour, while RuBisCO activase B (spot GL 7) and DNA helicase (spot GL 8) were down-regulated. Thus, we suggest that these proteins might participate in the early response to salt stress in ginseng leaves.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.205-207
• /
• 2004

The simple method of the geometric reconstruction of satellite linear pushbroom images is investigated. The model of the sensor used is based on the SPOT model that is developed by Kraiky. The satellite trajectory is a Keplerian trajectory in the approximation. Four orbital parameters, longitude of the ascending $node(\omega),$ inclination of the orbit plan(I), latitude argument of the satellite(W) and distance between earth center and satellite, are used for the camera modeling. We suppose that four orbital parameters and satellite attitude angles are exactly acquired. Then, in order to refine model, the given attitude angles and orbital parameters is not changed, but time-independent four parameters associated with LOS(Line Of Sight) vector is updated. A pair of SPOT-5 images has been used for validation of proposed method. Two GCPs acquired by GPS survey is used to controlling the LOS vector. The results are that the RMSE of 16 checking points are about 4.5m. Because the ground resolution of SPOT-5 is 2.5m, the result obtained in this study has a good accuracy. It demonstrates that the sensor model developed by this study can be used to reconstruct the geometry of satellite image taken by pushbroom camera.

• Journal of Welding and Joining
• /
• 제19권6호
• /
• pp.622-629
• /
• 2001

The aim of this experiment is to establish the method that obtains symmetrically two nuggets in microresistance series spot welding. The sheets of austenite stainless steel STS304 applied to various electronic parts were experimented by the inverter welding power source of polarity controllable type and by the twin head for left and right electrode force to be controlled separately. The experimental results were obtained as follows : 1) When series spot welding was carried out by DC 1 pulse as welding current with same electrode force at left and right, the asymmetry of nuggets was resulted from the larger nugget of the (-) pole because of the Peltier effect. The dynamic resistance of weld spot at left and right was appeared differently according to the growth of nuggets. 2) When AC 1 cycle by welding power source of polarity controllable type was applied, the nuggets were almost symmetrically formed. 3) In a twin head, if the electrode force of (-) pole was larger than that of (+) pole, the diameters of two nuggets became to same. It was confirmed that the dynamic resistance of (-) pole was decreased to the same level as it of (+) pole. 4) Although the forces of left and right electrode were same, and only DC 1 pulse was applied, symmetric nuggets were obtained if the conductivity of (+) pole was lower than it of (-) pole.

• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1131-1138
• /
• 2001

This paper concerns the crashworthiness of the widely used vehicle structure, the spot welded hat and double hat shaped section members, which are excellent on the point of the energy absorbing capacity and low production cost. The target of this paper is to analyze the energy absorption capacity of the structure against the front-end collision, and to obtain useful information for designing stage. Changing the spot weld pitches on the flanges, the hat and double hat shaped section members were tested on the axial collapse loads in impact velocities of 4.72m/sec, 6.54m/sec, 7.19m/sec and 7.27m/sec. To efficiently review the collapse characteristics of these sections, the simulation have been carried out using explicit FEM package, LS-DYNA3D. The solutions are compared with results from the impact collapse experiments.

• 한방안이비인후피부과학회지
• /
• 제15권2호
• /
• pp.183-189
• /
• 2002

Tinnitus is usually due to insufficiency of Kidney-essence, asthenia of the Spleen and Stomach, diseases caused by exogenous pathogenic factor, Liver fire(肝火) by severe stress, Phlegm -fire(痰火) by surfeit of high caloric food and alcoholic liquor. I observed and treated four patients who had been diagnosed with tinnitus of Liver-fire(肝火) and Phlegm-fire(痰火). After I checked the Inyeong(人迎) and the chon spot(寸口), all of their Inyeong were stronger than chon spot. Unbalance of the Inyeong(人迎) and the chon spot(寸口), and symptoms of tinnitus were removed by Acupuncture therapy of three Yang meridians of the hand(手三陽) and three Yang meridians of the foot(足三陽).

• The Plant Pathology Journal
• /
• 제37권4호
• /
• pp.339-346
• /
• 2021

Prevalence of tan spot of wheat caused by the fungus Pyrenophora tritici-repentis has become more prevalent in Oklahoma as no-till cultivation in wheat has increased. Hence, developing wheat varieties resistant to tan spot has been emphasized, and selecting pathogen isolates to screen for resistance to this disease is critical. Twelve isolates of P. tritici-repentis were used to inoculate 11 wheat cultivars in a greenhouse study in splitplot experiments. Virulence of isolates and cultivar resistance were measured in percent leaf area infection for all possible isolate x cultivar interactions. Isolates differed significantly (P < 0.01) in virulence on wheat cultivars, and cultivars differed significantly in disease reaction to isolates. Increased virulence of isolates detected increased variability in cultivar response (percent leaf area infection) (r = 0.56, P < 0.05) while increased susceptibility in cultivars detected increased variance in virulence of the isolates (r = 0.76, P < 0.01). A significant isolate × cultivar interaction indicated specificity between isolates and cultivars, however, cluster analysis indicated low to moderate physiological specialization. Similarity in wheat cultivars in response to pathogen isolates also was determined by cluster analysis. The use of diverse isolates of the fungus would facilitate evaluation of resistance in wheat cultivars to tan spot.