• 한국안전학회지
• /
• 제8권4호
• /
• pp.21-26
• /
• 1993

This paper presents a method of stress analysis of golf club. We define the sweet spot of golf club by the magnitude of torsional moment. Transfer matrix method was used for optimal design on sweet spot of golf club.

• The Plant Pathology Journal
• /
• 제33권3호
• /
• pp.229-237
• /
• 2017

Rye (Secale cereale L.) serves as an alternative host of Pyrenophora tritici-repentis (PTR) the cause of tan spot on wheat. Rye is cultivated as a forage or cover crop and overlaps with a significant portion of wheat acreage in the U.S. northern Great Plains; however, it is not known whether the rye crop influences the evolution of PTR races. We evaluated a global collection of 211 rye accessions against tan spot and assessed the diversity in PTR population on rye in South Dakota. All the rye genotypes were inoculated with PTR races 1 and 5, and infiltrated with Ptr ToxA and Ptr ToxB, at seedling stage. We observed 21% of the genotypes exhibited susceptibility to race 1, whereas, 39% were susceptible to race 5. All 211 accessions were insensitive to both the Ptr toxins. It indicates that though rye exhibits diversity in reaction to tan spot, it lacks Ptr ToxA and ToxB sensitivity genes. This suggests that unknown toxins or other factors can lead to PTR establishment in rye. We characterized the race structure of 103 PTR isolates recovered from rye in South Dakota. Only 22% of the isolates amplified Ptr ToxA gene and were identified as race 1 based on their phenotypic reaction on the differential set. The remaining 80 isolates were noted to be race 4. Our results show that races 1 and 4 are prevalent on rye in South Dakota with a higher frequency of race 4, suggesting a minimal role of rye in the disease epidemiology.

• 한국응용곤충학회지
• /
• 제22권1호
• /
• pp.7-14
• /
• 1983

2년간에 걸쳐 조사한 대두의 수량감소는 갈색무늬병을 접종한 경우 농약 살포구에 비해 $15.7-16.4\%$ 감소 차였으며 자연감염의 경우에는 $8.2-9.2\%$의 감소를 나타냈다. 갈색무늬병의 감염은 초장, 주당절수(株當節數), 주당분지수(分枝數)에는 큰 영향이 없었으나 주당협수(狹數)와 종실중(種實重)에는 현저한 감소 현상을 보였다. 대두의 수량감소율을 갈색무늬병의 이병율과 정(正)의 상관을 보였으며 그 상관도는 Van der Plank's infection rate (0.156) 보다는 병 진전국선면적(AUBC) 과의 상관도가 높았다$(r=0.388^*)$. 병진전곡선 면적으로 표시된 갈색무늬병의 감염율과 대두수량 감소율과의 관계는 y=4.38+0.5X $(r=0.686^{**},\;df=25)$으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3140-3149
• /
• 2023

In theory, the sharp dose falloff at the distal end of a proton beam allows for high conformal dose to the target. However, conformity has not been fully achieved in practice, primarily due to beam range uncertainty, which is approximately 4% and varies slightly across institutions. To address this issue, we developed a new range verification system prototype: a multi-slit prompt-gamma camera (MSPGC). This system features high prompt-gamma detection sensitivity, an advanced range estimation algorithm, and a precise camera positioning system. We evaluated the range measurement precision of the prototype for single spot beams with varying energies, proton quantities, and positions, as well as for spot-scanning proton beams in a simulated SSPT treatment using a phantom. Our results demonstrated high accuracy (<0.4 mm) in range measurement for the tested beam energies and positions. Measurement precision increased significantly with the number of protons, achieving 1% precision with 5 × 10⁸ protons. For spot-scanning proton beams, the prototype ensured more than 5 × 10⁸ protons per spot with a 7 mm or larger spot aggregation, achieving 1% range measurement precision. Based on these findings, we anticipate that the clinical application of the new prototype will reduce range uncertainty (currently approximately 4%) to 1% or less.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2449-2452
• /
• 2007

Hot spots on thin wafers of IC packages are becoming important issues in thermal and electrical engineering fields. To investigate these hot spots, we developed a Diode Temperature Sensor Array (DTSA) that consists of an array of 32 ${\times}$32 diodes (1,024 diodes) in a 8 mm ${\times}$ 8 mm surface area. To know specifically the hot spot temperature which is affected by the chip thickness and a generated power, we made the DTSA chips, which have 21.5 ${\mu}m$, 31 ${\mu}m$, 42 ${\mu}m$, 100 ${\mu}m$, 200 ${\mu}m$, and 400 ${\mu}m$ thickness using the CMP process. And we conducted the experiment using various heater power conditions (0.2 W, 0.3 W, 0.4 W, 0.5 W). In order to validate experimental results, we performed a numerical simulation. Errors between experimental results and numerical data are less than 4%. Finally, we proposed a correlation for the hot spot temperature as a function of the generated power and the wafer thickness based on the results of the experiment. This correlation can give an easy estimate of the hot spot temperature for flip chip packaging when the wafer thickness and the generated power are given.

• 한국광학회지
• /
• 제11권6호
• /
• pp.390-394
• /
• 2000

사람의 홍채 인식을 통항 보안 통제를 하기 위한 광학계를 설계하였다. 이 렌즈는 종색수차와 Petzval sum을 최소로 하는 triplet형이다. 초점거리를 50mm 유효경을 10mm로 하였고 물체로부터 상까지의 거리는 200mm-300mm로 고려하였다. 눈을 고려한 전체 광학계의 성능은 ray-fan과 spot diagram 그리고 회절광학적인 MTF를 계산하여 평가하였다. 홍채의 크기를 고려하여 물체 높이 0mm, 4mm 그리고 6mm 에 대하여, 파장은 Fraunhofer C, d 및 F-line에 대하여 모두 계산한 결과 spot 크기는 0.05mm 직경을 벗어나지 않았고 MTF 값도 물체 높이 6mm에 대한 486mm 파장의 sagittal MTF를 제외하고는 20 lines/mm의 공간주파수에서 0.5이상이 되었다.

• 식물병연구
• /
• 제9권3호
• /
• pp.166-169
• /
• 2003

고추재배에서 갈색점무늬병에 의한 반점 황화 조기낙엽 등의 피해로 수량감소를 일으키고 있어, 이 병해에 대한 저항성 육종을 위해서 병원균의 인위접종에 의한 발병조건을 확립하고자 한다. 본 실험 결과, 발병온도는 접종 후 야간 15~$20^{\circ}C$/주간 20~$25^{\circ}C$에서 습실을 경과하는 것이 발병이 가장 양호하였다. 접종묘령은 접종 후 병반 형성수가 많으면서 낙엽이 적게되는 30~40일 유묘가 발병이 가장 좋았다. 고추 유묘에 포자현탁액으로 접종할 경우 3.4 ${\times}$ $10^5$ conidia/ml 농도가 적당하며 접종 후 병반수로 저항성 정도를 조사할 때 20일까지 적당하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권2호
• /
• pp.23-29
• /
• 2003

The spot welded sections of automobiles (hat and double hat shaped sections) absorb most of the energy in a front-end collision. The target of this paper is to analyze the energy absorbing capacity of the structure against the front-end collision, and to obtain useful information for designing stage. Changed the spot welded pitches on the flanges, the hat and double hat shaped section members were tested on the axial collapse loads at various impact velocities. It was expected that para-closed sections would show collapse characteristics which be quite different from those of perfectly closed sections. Hat shaped section members were tested at the impact collapse velocities of 4.72m/sec, 6.54m/sec and 7.1m/sec and double hat shaped section members were tested at the impact collapse velocities of 6.54m/sec, 7.1 m/sec and 7.27m/sec.

• 여성건강간호학회지
• /
• 제22권4호
• /
• pp.297-307
• /
• 2016

Purpose: This study was to estimate salt preference and sodium intake of pregnant women, and identify the relationship between salt preference and sodium intake. Methods: Research design was a cross sectional correlational survey with 197 pregnant women who visited outpatient clinics for antenatal care. The sodium intake levels were estimated by the amounts of sodium intake using the 24-hour recall method and sodium concentration in spot urine. The data were analyzed using descriptive statistics, t-test, ANOVA and Pearson's correlation. Results: Sodium intake using 24-hour recall method was $3,504{\pm}1,359mg$. Sodium intake levels had statistically significant differences depending on income. The average amount of sodium in spot urine was $2,882{\pm}878mg/day$. Sodium excretion levels had statistically significant differences depending on whether participants had preexisting hypertension in their family history and Body Mass Index (BMI) pre-conception. Salt preference was $62.61{\pm}20.96$ out of 180 points. Salt preference had significant differences depending on income, parity, gestational age, BMI pre-conception and showed negative correlation with sodium quantity in spot urine. Conclusion: Sodium intake in pregnant women recommended by World Health Organization recommended is 175%. Salt preference was not significantly different between sodium intake levels, however it was negatively correlated with sodium quantity in spot urine among pregnant women.

• Journal of Multimedia Information System
• /
• 제4권1호
• /
• pp.9-18
• /
• 2017

Ubiquitous computing is a novel paradigm that is rapidly gaining in the scenario of wireless communications and telecommunications for realizing smart world. As rapid development of sensor technology, smart sensor system becomes more popular in automobile or vehicle. In this study, a new vehicle detection mechanism in real-time for blind spot area is proposed based on imaging sensors. To determine the position of other vehicles on the road is important for operation of driver assistance systems (DASs) to increase driving safety. As the result, blind spot detection of vehicles is addressed using an automobile detection algorithm for blind spots. The proposed vehicle verification utilizes the height and angle of a rear-looking vehicle mounted camera. Candidate vehicle information is extracted using adaptive shadow detection based on brightness values of an image of a vehicle area. The vehicle is verified using a training set with Haar-like features of candidate vehicles. Using these processes, moving vehicles can be detected in blind spots. The detection ratio of true vehicles was 91.1% in blind spots based on various experimental results.