• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.33-34
• /
• 2010

초고강도 콘크리트의 적용확대로 새로운 철근 압축이음길이 설계식의 개발 필요성이 제기되고 있다. 본 연구에서는, 현행 콘크리트구조설계기준의 인장 이음길이와 갈고리 정착길이 설계식과 같은 형태를 활용하여, 사용이 편리한 압축이음길이 설계식을 회귀분석을 통해 제안하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.440-445
• /
• 2000

The purpose of this study is to investigate the structural performance of columns in an Reinforced Concrete Ordinary Moment Frame building. For this purpose, a 3-story building was designed according to the Korea seismic design provisons and ACI 318-99, and the columns of in the first story were constructed. The columns were classified into interior and columns. For each interior and exterior columns, upper and lower parts ate modeled by the 2/3 scale experimental specimens. The specimens for lower part columns have lap splice. The interior columns were tested under the constant axial force, while the exterior columns were tested under the fluctuating axial force. Based on the results of the experiments, the effects of the lap splice and axial force on the column performance are evaluated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.865-871
• /
• 2003

This paper presents the test results of 24 beam-end specimens to investigate the effect of concrete strength and cover thickness on the development resistance capacity in tensile lap splice length regions. The results showed that as higher strength concrete was employed, nor only development resistance capacity was influenced by cover thickness, but also more sufficient safety factor reserved shorter than the lap splice length provision in current design code. From experimental research results, high-strength concrete development length was not inverse ratio of ($\sqrt{f_{ck}}$) but directly inverse of $f_{ck}$, and it is also said that there is a certain limit length of the embedded steel over which the assumption of uniform bond stress distribution is valid specially for high-strength concrete not having a same embed length such as normal-strength concrete in current design criteria hypothesis.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.180-186
• /
• 2017

거의 모든 철근콘크리트 구조물의 보강 강재는 분할된 두개 이상의 철근으로 제작되며, 이러한 철근의 분할 부위를 평행한 두개의 철근으로 겹쳐 설치하는 것을 겹이음(Lap splice)이라고 부른다. 일반적으로 겹이음 설계는 무리없이 설계 강도를 만족시킬 뿐만 아니라 충분히 긴 수명을 가진다. 그러나 550MPa 이상의 항복 강도를 갖는 철근이나 인장 부재의 설계, 초고성능 섬유보강 콘크리트의 보강재 설계와 같은 경우, 현행 철근 겹이음 설계만으로는 그 한계가 발생한다. 따라서 현 겹이음 설계는 관련 기준의 추가와 구조적인 측면에서의 개선이 필요할 것으로 보여지며, 이를 위해 적절한 실험과 데이터 분석, 그리고 컴퓨터를 이용한 새로운 설계 모델의 개발 등의 과정이 필요할 것으로 여겨진다. 본 연구는 균질하지 않은 물성의 파괴를 다루는 RBSN(Rigid-Body-Spring Networks)을 통한 컴퓨터 시뮬레이션으로 더 효과적이고 정확한 겹이음 설계가 가능할 것으로 판단하고, 실제 모델링으로 그 가능성을 검증하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.9-13
• /
• 2006

The purpose of this study was to introduce the applied care of PC beam-column interior joint with splice type rebar. In this case, although the erection time of the introduced case was a little bit higher than that of general precast concrete method, this method was more effective than general precast concrete method in aspect of direct cost and the number of column joint. Therefore, this method could be adopted in the construction of the commercial and residential building in the future.

• 한국컴퓨터정보학회논문지
• /
• 제11권5호
• /
• pp.321-327
• /
• 2006

최근 들어 상업적이거나 과학적인 데이터들의 폭발적인 증가를 볼 수 있다. 이런 데이터들은 항목들 간의 순서적인 면을 가지고 있는 시퀀스 데이터들이다. 그러나 항목들 간의 순서적인 면을 고려한 클러스터링 연구는 많지 않다. 본 논문에서는 이들 시퀀스 데이터들 간의 유사도를 계산하는 방법과 클러스터링 방법을 연구한다. 특히 다양한 조건을 고려한 확장된 유사도 계산 방법을 제안한다. splice 데이터 셋을 이용하여 본 논문에서 제안하는 클러스터링 방법이 기존 방법 보다 우수하다는 것을 보여준다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.879-884
• /
• 2000

In this study, an experimental work is conducted to evaluate the bond performance between reinforcing bars and surrounding concrete in a lapped splice. The major variable of this test is a transverse reinforcement in lap-spliced tension reinforcing bars. The test results indicate that the bond strength per unit splice length increases with an increase in the transverse reinforcement factor $K_{\alpha}$. The specimens taken less than (c+$K_{tr}$)/$d_b$=3.0 tend to be very brittle at failure. But the specimens taken longer than (c+$K_{tr}$)/$d_b$=3.0 tend to be somewhat ductile at failure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.171-174
• /
• 2005

In this study, new moment-resisting precast concrete beam-column joint is proposed for moderate seismic regions. It has the connection reinforcing bars, penetrated the joint and lap-spliced with the bottom bars of precast U-beam. To evaluate the performance for noncontact lapped splice, analytical works were conducted. Major variables for FEM analysis are the length of lap, the diameter of connection reinforcing bars, and the distance between lapped bars. The results of this study show thar the these variables has much influence on strength and deformation of lapped joint.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1073-1078
• /
• 2000

This study is to investigate the effect of construction element such as the number of CFS ply, curing temperature, splice length and curing periods on the mechanical properties of Carbon Fiber Sheet (CFS). Through the tensile tests of CFS specimens, it can be said that the reduction factor stemmed from the number of CFS ply must be considered in the calculation of the design tensile strength of CFS. Also, the minimum splice length of CFS and curing period in $20^{\circ}C$ to satisfy the standard tension strength of CFS are over 5cm and after 3days, respectively. The measuring error of epoxy resin have no effect to tension strength of CFS until $\pm$20% error.

• 콘크리트학회논문집
• /
• 제11권3호
• /
• pp.47-57
• /
• 1999

The small-scale models have been utilized for the prediction of inelastic behavior of reinforced concrete structures for several decades. The parameters that affect the similitude between the model and prototype are various. Among them, the effect of bond between the model reinforcement and the model concrete is one of the most important factors. The study reported herein is addressed to verifying this similitude in bond behavior. The simple beams which have the lap splice at the midspan were made and flexural tests were performed under two-point loading. The length of lap splice are varied from 0.4ld through 0.7ld and up to 1.0ld where ld is the development length of the reinforcement. The selected scales are 1/1, 1/5, 1/10 and 1/12. Two prototype specimens and three models were tested in addition to the associated material tests and the test results are compared from the viewpoint of similitude.