Effect of Construction Element on the Mechanical Properties of Carbon Fiber Sheet

시공요소가 탄소섬유쉬트의 역학적 특성에 미치는 영향

  • 이한승 (한양대학교 초대형구조 시스템 연구센터 연구 조교수, 공박) ;
  • 유영찬 (한국건설기술연구원 건축연구부 선임 연구원, 공박) ;
  • 최근도 (한국건설기술연구원 건축연구부 연구원) ;
  • 최거선 (한국건설기술연구원 건축연구부 연구원) ;
  • 류화성 (한국건설기술연구원 건축연구부 연구원) ;
  • 김긍환 (한국건설기술연구원 선임연구부장, 공박)
  • Published : 2000.10.01

Abstract

This study is to investigate the effect of construction element such as the number of CFS ply, curing temperature, splice length and curing periods on the mechanical properties of Carbon Fiber Sheet (CFS). Through the tensile tests of CFS specimens, it can be said that the reduction factor stemmed from the number of CFS ply must be considered in the calculation of the design tensile strength of CFS. Also, the minimum splice length of CFS and curing period in $20^{\circ}C$ to satisfy the standard tension strength of CFS are over 5cm and after 3days, respectively. The measuring error of epoxy resin have no effect to tension strength of CFS until $\pm$20% error.

Keywords