• 한국의류산업학회지
• /
• 제15권4호
• /
• pp.620-629
• /
• 2013

This study examines the rustling sound characteristics of electrospun nanofiber web laminates according to layer structures. This study assesses mechanical properties and frictional sounds (such as SPL); in addition, Zwicker's psychoacoustic parameters (such as Loudness (Z), Sharpness (Z), Roughness (Z), and Fluctuation strength (Z)) were calculated using the Sound Quality Program (ver.3.2, B&K, Denmark). The result determined how to control these characteristics and minimize rustling sounds. A total of 3 specimens' frictional sound (generated at 0.63 m/s) was recorded using a Simulator for Frictional Sound of Fabrics (Korea Patent No. 10-2008-0105524) and SPLs were analyzed with a Fast Fourier Transformation (FFT). The mechanical properties of fabrics were measured with a KES-FB system. The SPL value of the sound spectrum showed 6.84~58.47dB at 0~17,500Hz. The SPL value was 61.2dB for the 2-layer PU nanofiber web laminates layered on densely woven PET(C1) and was the highest at 65.1dB for the 3-layer PU nanofiber web laminates (C3). Based on SPSS 18.0, it was shown that there is a correlation between mechanical properties and psychoacoustic characteristics. Tensile properties (LT), weight (T), and bending properties (2HB) showed a high correlation with psychoacoustic characteristics. Tensile linearity (LT) with Loudness (Z) showed a negative correlation coefficient; however, weight (T) with Sharpness (Z) and Roughness (Z), and bending hysteresis (2HB) with Roughness (Z) indicated positive correlation coefficients, respectively.

• 한국전산유체공학회지
• /
• 제13권1호
• /
• pp.35-40
• /
• 2008

Generally flight vehicles have many cavities such as wheel wells, bomb bays and windows on their external surfaces and the flow around these cavities makes separation, vortex, shock and expansion waves, reattachment and other complex flow phenomenon. The flow around the cavity makes abnormal and three-dimensional noise and vibration even thought the aspect ratio (L/D) is small. The cavity giving large effects to the flow might make large noise, cause structural damage or breakage, harm the aerodynamic performance and stability, or damage the sensitive devices. In this study, numerical analysis was performed for cavity flows by the unsteady compressible three dimensional Reynolds-Averaged Navier-Stokes (RANS) equations with Wilcox's $\kappa-\omega$ turbulence model. The MPI(Message Passing Interface) parallelized code was used for calculations by PC-cluster. The cavity has the aspect ratios of 2.5, 3.5 and 4.5 with the W/D ratio of 2 for three-dimensional cavities. The Sound Pressure Level (SPL) analysis was done with FFT to check the dominant frequency of the cavity flow. The dominant frequencies were analyzed and compared with the results of Rossiter's formula and Ahuja& Mendoza's experimental datum.

• 한국태양에너지학회 논문집
• /
• 제32권2호
• /
• pp.105-112
• /
• 2012

The conversion of solar energy into acoustic waves is experimentally studied. Measurements were made on the Sound Pressure Level (SPL), frequency, onset time and the temperature gradient across the stack. A pyrex resonance tube is used with a honey-comb structure ceramic stack along with Ni-Cr and Cu wires. An AL1 acoustical analyzer was used to measure the SPL and frequency of acoustic waves whereas K-type thermocouples were hired to estimate temperature gradients. For a resonance tube of 100 mm, no acoustic waves were generated with a power input of 25W. By increasing its length to 200 mm, however, maximum SPLs of 96.4 dB, 106.3 dB and 112.8 dB were detected for the tubes of 10mm,20mm and 30mm in IDs and their respective stack positions of 70mm, 60mm and 50mm from the closed end.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.516-521
• /
• 2012

The conversion of solar energy into acoustic waves is experimentally studied. Measurements were made on the Sound Pressure Level (SPL), frequency, onset time and the temperature gradient across the stack. A pyrex resonance tube is used with a honey-comb structure ceramic stack along with Ni-Cr and Cu wires. An AL1 acoustical analyzer was used to measure the SPL and frequency of acoustic waves whereas K-type thermocouples were hired to estimate temperature gradients. For a resonance tube of 100mm, no acoustic waves were generated with a power input of 25W. By increasing its length to 200mm, however, maximum SPLs of 96.4 dB, 106.3 dB and 112.8 dB were detected for the tubes of 10mm, 20mm and 30mm in IDs and their respective stack positions of 70mm, 60mm and 50mm from the closed end.

• 한국태양에너지학회 논문집
• /
• 제33권4호
• /
• pp.8-14
• /
• 2013

The conversion of solar energy into acoustic waves is experimentally studied. Measurements were made on the Sound Pressure Level(SPL), onset time and the temperature gradient across the stack, with the Cell Per Square Inch(CPSI) of stack changed. A pyrex resonance tube is used with a honey-comb structure ceramic stack along with Ni-Cr and Cu wires. An AL1 acoustical analyzer was used to measure the SPL and frequency of acoustic waves whereas K-type thermocouples were hired to estimate temperature gradients. As a result, when the supply electric power was 25W, maximum SPLs of 104.1 dB, 109.4 dB and 112.8 dB were detected for the stacks of 200, 300 and 400 CPSI and their respective stack positions of 70mm, 60mm and 50mm from the closed end.

• 한국음향학회지
• /
• 제32권4호
• /
• pp.301-307
• /
• 2013

수중무기체계에 있어 소나 탐지 성능은 생존성 향상을 위한 중요한 인자이다. 소나의 음향수신 성능을 파악하기 위해서 탄성이론을 이용하여 소나 다층구조의 음향 성능을 해석하였다. 단순구조물에 대하여 탄성이론을 적용하여 얻은 본 해석 결과를 상용해석프로그램인 ANSYS와 비교하였고, 만족할만한 결과를 얻었다. 검증된 탄성이론을 이용하여 소나 다층구조의 층별 두께 변화에 따른 음압 및 반향음 감소 해석을 수행하였다. 무반향(anechoic)층의 두께가 증가할수록 주파수에 따른 음압이 고르게 분포하고 반향음 감소량이 약간 증가하는 것을 확인하였다. 비결합(decoupling)층과 스틸(steel)층의 경우 두께에 따른 음압의 변화는 거의 없으나 두꺼워질수록 반향음이 약간 감소하는 결과를 나타내었다. 탄소강화플라스틱(Carbon Reinforced Platic, CRP)층의 두께 변화는 음압과 반향음 감소량에 영향이 없는 것을 확인하였다. 따라서 소나 다층구조의 음향성능을 높이기 위해서는 무반향층을 두껍게 하고, 비결합층, 스틸층과 탄소강화플라스틱층은 최소화하는 것이 바람직할 것으로 예상된다.

• 한국소음진동공학회논문집
• /
• 제12권6호
• /
• pp.431-436
• /
• 2002

The interior sound pressure level of the Korean high-speed train(KHST) is predicted by geometrical acoustic method. For the Purpose of assuring the prediction of Interior noise of KHST by the geometrical acoustic scheme, calculated sound level values of the Korean train express(KTX) by Identical geometrical method are compared with measured values of KTX prototype vehicle by experiment. Contribution of individual sound source of KHST vehicle Into the interior response positions is calculated and sound sources are classified in influential order. Hence, it is reasonable approach to reduce sound power of most contributing noise source first. Sensitivity of the interior response position's sound pressure level (SPL) with respect to train wall sections' transmission loss are carried on and acoustically sensitive spot is identified, for example window area for passenger cabin case. Those contribution and sensitivity analysis results are suggested to design quieter train efficiently.

• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.392-398
• /
• 1986

본 연구에서는 실험적 방법을 통하여 엔진 배기관의 굴곡 형상이 배기 소음에 미치는 영향에 대해서 고찰하였다. 엔진으로는 4기통, 배기량 2164cc의 디이젤 엔진 을 사용하였으며 엔진의 보통 사용 범위인 1200∼3200rpm, 드로틀밸브의 개방도 25∼를 100% 구간에서 실험을 수행하였다. 굴곡부의 형상으로는 대부분의 배기관 굴곡이 원 호 형태임을 고헌하여 원호형의 굴곡관과 관의 꺽임부의 영향을 고찰하기 위한 직각형 굴곡관의 두가지 형태를 택하였따. 각 엔진의 운전 조건에서 굴곡관의 형상 치수를 바꾸어 가며 배기 소음의 음압(sound pressure level, SPL)과 스펙트럼을 얻었으며 이 들을 상호 비교 검토하여 배기관 굴곡 형상의 주요 설계 변수에 의한 배기 소음의 영 향을 고찰하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 2부
• /
• pp.883-885
• /
• 2010

다양한 홀에서 물리적으로 운동하는 사운드를 미리 예측한다는 것은 매우 어려운 일이다. 자유롭게 운동하는 사운드를 예측/분석할 수 있는 과학적인 소프트웨어는 사운드 엔지니어에게 많은 도움을 준다. 소리의 물리적 운동 방향(Sound Directivity), 거리에 따른 타임 딜레이(Time Delay), 스피커의 각도와 적정한 SPL(Sound Pressure Level)을 과학적인 근거에 의해서 정확한 값을 산출하여 음향 장비 설치이전에 미리 예측하여 음향 디자인을 완성한다면 시간과 비용을 획기적으로 줄일 수 있다. 본 연구은 현재 개발 과정에 있거나 혹은 사용되어지고 있는 소리 예측 프로그램을 분석하여 보다 진보된 소리예측 프로그램을 개발하고자 함이다.

• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3197-3202
• /
• 2013

철도차량 차체 설계시 음압레벨에 따른 소음해석을 통한 차체 패널의 감쇠특성을 최적화하는 것이 필요하다. 본 논문은 철도차량 차체용 알루미늄 더블스킨 압출패널의 진동감쇠특성 해석을 통한 철도차량 차체의 구조소음 해석에 관한 연구이다. 주파수응답 가진시험을 통하여 측정된 기계적 모빌리티 값인 포인트 모빌리티, 트랜스퍼 모빌리티, 모달 모빌리티와 단순음원이론을 사용하여 정규화된 음압을 계산하였다. 도포용 감쇠재의 감쇠값을 라미네이티드 쉘요소에 사용하여 유한요소해석을 수행함으로써, 감쇠처리에 의한 소음감소수준 예측을 하였다. 또한 실제 차량 구조와 유사한 고정경계조건의 감쇠특성해석을 통하여 열차주행시 발생하는 진동의 영향을 크게 받는 언더프레임과 같은 부위에 일정 두께의 감쇠재 코팅이 진동 및 소음억제에 큰 효과가 있을 것으로 사료된다.