• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.707-714
• /
• 2005

Ingredient ratio for making nabak kimchi and the manufacturing method were standardized from the available literatures. Fermentation properties and $CO_2$ production of the nabak kimchi were investigated during the fermentation at $5^{\circ}C,\;10^{\circ}C,\;and\;20^{\circ}C$. Standardized ingredients ratio of nabak kimchi that added 100 mL of water was as follows: 45.0 g baechu cabbage, 26.9 g radish, 1.9 g green onion, 1.0 g red pepper, 1.2 g crushed garlic, 0.9 g crushed ginger, 0.7 g red pepper powder. The standardized manufacturing method of nabak kimchi was as follows: washing ingredients, cutting radish and baechu cabbage $(2.5\times2.5\times0.5\;cm)$, salting for 20 min, washing and draining, pretreatment of ingredients, dissolving red pepper powder in water, blending, mixing, and adding the water to the mixed ingredients. Fermentations at $5^{\circ}C$ for 8 days, at $10^{\circ}C$ for 3 days, and at $20^{\circ}C$ for 1 day led to the acidity levels of $0.21\%,\;0.20\%,\;and\;0.31\%$, respectively. From the relationships between optimally ripened pH and acidity, nabak kimchi showed lower acidity of $0.20\~0.25\%$ with pH $4.2\~4.5.$ Like other kinds of kimchi, the Levels of Leuconostoc sp. were high specially at later stage of fermentation at low temperature $(5^{\circ}C)$. However, the levels of Lactobacillus sp. were low at $5^{\circ}C$. Nabak kimchi produced high levels of $CO_2$ in the initial fermentation period and followed by rapid decrease of $CO_2$ production with the fermentation. From the relationships between pH and $CO_2$ content, the highest $CO_2$ contents were found pH $4.0\~4.4$, 3.8 and 3.4 at $5^{\circ}C,\;10^{\circ}C$, and $20^{\circ}C$, respectively. This fact indicated that fermentation at $5^{\circ}C$ has the highest $CO_2$ content at optimally ripened pH of 4.3 and the fermentation at lower temperature such as $5^{\circ}C$ could extend the eatable time of nabak kimchi.

• Korean Journal of Organic Agriculture
• /
• v.29 no.4
• /
• pp.601-612
• /
• 2021

This study was conducted to evaluate the appropriate sowing method and mixture seeding rate on germination of Kentucky bluegrass (Poa pratensis L.) and white clover (Trifolium repens L.). The experimental design includes two sowing methods and six mixed seeding per each method: BT₁:BP₀ (broadcast seeding; B, Trifolium repens; T, Poa pratensis; P), BT₁:BP₂, BT₁:BP₃, BT₃:BT₁, BT₂:BP₁, BT₀:BP₁ and ST₁:SP₀ (spot seeding; S), ST₁:SP₂, ST₁:SP₃, ST₃:ST₁, ST₂:SP₁, ST₀:SP₁. The germination was the highest for both species when the seeding rate was higher than other species. In overall, the germination of white clover was higher and faster than Kentucky bluegrass. Two plots, BT₂:BP₁, ST₁:ST₂, were retained the balanced proportion of the germination rate. Therefore, It was suggested, for maintaining the balanced field, it is better to seed white clover twice Kentucky bluegrass on broadcast seeding and Kentucky bluegrass twice white clover on spot seeding. In regard of sowing method, broadcast seeding is better than spot seeding in terms of increasing the germination. It is necessary to supplement the result for real application by long-term monitoring.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.267-272
• /
• 2005

Geophysical surveys were performed in three abandoned mines: Jangpoong, Kwangyang, Imchon. The main objectives of the researches include delineating the pathways of leachate from acid mine drainage(AMD), mapping buried rock wastes and tailings, detecting drainage pipes, and investigating the gallery and membrane, if they exist, Geophysical responses were well correlated with the results from water sample data(i.e., pH, EC, heavy metal contents, $SO_4^{-2}$). Main pathways of the leachate were successfully detected in electrical resistivity sections and self-potential(SP) profiles, whereas waste rocks, drainage pipes, and membranes were effectively located by incorporating seismic refraction, electrical resistivity and GPR methods.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.1
• /
• pp.33-42
• /
• 2001

Recently, the interests in the 3D image, generated from the range data and CAD, have exceedingly increased, accordingly a various 3D image database is being constructed. The efficient and fast scheme to access the desired image data is the important issue in the application area of the Internet and digital library. However, it is difficult to manage the 3D image database because of its huge size. Therefore, a proper descriptor is necessary to manage the data efficiently, including the content-based search. In this paper, the proposed shape descriptor is based on the voxelization of the 3D image. The medial axis transform, stemming from the mathematical morphology, is performed on the voxelized 3D image and the graph, which is composed of node and edge, is generated from skeletons. The generated graph is adequate to the novel shape descriptor due to no loss of geometric information and the similarity of the insight of the human. Therefore the proposed shape descriptor would be useful for the recognition of 3D object, compression, and content-based search.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.496-505
• /
• 1998

물류활동에서 운송부분이 차지하는 중요성은 기업의 경영자층에게 더욱 중요하게 인식되고 있는데, 이는 경쟁 환경 때문이다. 경쟁환경에서는 'Output Logistic' 즉, 운송활동의 수행정도에 따라 물류활동의 성패가 결정된다. 따라서 기업물류활동의 근간인 운송활동의 주요 결정요인과 선택형태를 알아보고, 이들이 실제로 기업의 물류활동에 어느 정도 영향을 미치는지를 심층적으로 분석해보는 것도 매우 의미 있는 일이라 하겠다. 더구나 우리 나라의 현재의 경제여건에서는 물류비에 대한 효율화 작업이 필요한데 반해 그 동안의 연구들을 살펴보면 SP 자료를 이용한 가상적 상황하에서의 화주의 선택행태를 분석하였으므로 실제 선택한 수단간의 gap을 극복할 수 없었다. 기업은 운송수단의 선택시 복잡한 결정과정을 갖는다. 이는 운송부문이 총물류비용에서 차지하는 중요도 때문이다. 기업의 운송관리자는 화물을 출하할 때마다 선택의 기로에 서게 된다. 즉, 일부는 조직 체계나 다른 계약 여건에 따라 이전과 동일한 수단을 선택하는 경우도 있지만, 많은 경우에는 매번 출하시 마다 최적의 운송수단을 선택하기 위한 새로운 결정을 하게 된다. 본 연구는 이러한 화주의 수단선택행태를 실제 RP 자료를 이용하여 분석하였다. 수단선택모형의 적용 및 분서결과를 살펴보면 상당히 attractive한 결과를 발견할 수 있는데 각 품목별 추정 값이 운송거리에 대해서는 음으로 운송비용에 대해서는 양으로 나타나고 있다. 다시 말하면 운송거리가 길수록 효용은 감소하고 운송비용이 커질수록 효용은 증가한다는 것을 의미하므로 그 분석결과가 올바른 결과를 도출하고 있지는 않다. 그러나 여기서 알수 있는 것은 운송거리와 운송비용이 각각 주요한 변수라는 것이다. 모형의 타당성을 검증하기 위해서는 logilikelihood 값을 구하여 $\rho$^2분석을 시행하였다. 여기서는 각 품목별로 $\rho$^2값이 약 0.15~0.3의 비교적 높은 수치를 보여주고 있으므로 모형의 설명력이 어느 정도 있다는 것이 아울러 증명이 되었다. 상관관계에 대한 분석에서는 영업용 차량간의 상관관계가 높게 나타났으며, 이는 곧 영업용 화물차량을 적재중량별로 구분하는 것이 별 의미가 없음을 의미한다. 다시 말하면 자가용 차량을 보유하고 있지 않은 회사는 다른 운송전문업체에 화물운송을 의뢰하게 되므로 출하중량에 따라 화물차량을 구분하는 것에 대해서 그다지 큰 고려를 하지 않는 것으로 해석할 수가 있다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.100-108
• /
• 2012

The purpose of the study was to evaluate the influence of shading and ventilation on Mean Radiant Temperature(MRT) of the outdoor space at a summer outdoor. The Wind Speed(WS), Air Temperature(AT) and Globe Temperature(GT) were recorded every minute from $1^{st}$ of May to the $30^{th}$ of September 2011 at a height of 1.2m above in four experimental plots with different shading and ventilating conditions, with a measuring system consisting of a vane type anemometer(Barini Design's BDTH), Resistance Temperature Detector(RTD, Pt-100), standard black globe(${\O}$ 150mm) and data acquisition systems(National Instrument's Labview and Compfile Techs' Moacon). To implement four different ventilating and shading conditions, three hexahedral steel frames, and one natural plot were established in the open grass field. Two of the steel frames had a dimension of $3m(W){\times}3m(L){\times}1.5m(H)$ and every vertical side covered with transparent polyethylene film to prevent lateral ventilation(Ventilation Blocking Plot: VP), and an additional shading curtain was applied on the top side of a frame(Shading and Ventilation Blocking Plot: SVP). The third was $1.5m(W){\times}1.5m(L){\times}1.5m(H)$, only the top side of which was covered by the shading curtain without the lateral film(Shading Plot: SP). The last plot was natural condition without any kind of shading and wind blocking material(Natural Open Plot: NP). Based on the 13,262 records of 44 sunny days, the time serial difference of AT and GT for 24 hour were analyzed and compared, and statistical analysis was done based on the 7,172 records of daytime period from 7 A.M. to 8 P.M., while the relation between the MRT and solar radiation and wind speed was analyzed based on the records of the hottest period from 11 A.M. to 4 P.M.. The major findings were as follows: 1. The peak AT was $40.8^{\circ}C$ at VP and $35.6^{\circ}C$ at SP showing the difference about $5^{\circ}C$, but the difference of average AT was very small within${\pm}1^{\circ}C$. 2. The difference of the peak GT was $12^{\circ}C$ showing $52.5^{\circ}C$ at VP and $40.6^{\circ}C$ at SP, while the gap of average GT between the two plots was $6^{\circ}C$. Comparing all four plots including NP and SVP, it can be said that the shading decrease $6^{\circ}C$ GT while the wind blocking increase $3^{\circ}C$ GT. 3. According to the calculated MRT, the shading has a cooling effect in reducing a maximum of $13^{\circ}C$ and average $9^{\circ}C$ MRT, while the wind blocking has heating effect of increasing average $3^{\circ}C$ MRT. In other words, the MRT of the shaded area with natural ventilation could be cooler than the wind blocking the sunny site to about $16^{\circ}C$ MRT maximum. 4. The regression and correlation tests showed that the shading is more important than the ventilation in reducing the MRT, while both of them do an important role in improving the outdoor thermal comfort. In summary, the results of this study showed that the shade is the first and the ventilation is the second important factor in terms of improving outdoor thermal comfort in summer daylight hours. Therefore, it can be apparently said that the more shade by the forest, shading trees etc., the more effective in conditioning the microclimate of an outdoor space reducing the useless or even harmful heat energy for human activities. Furthermore, the delicately designed wind corridor or outdoor ventilation system can improve even the thermal environment of urban area.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.536-549
• /
• 2005

국내 대부분을 차지하고 있는 NATM의 주요원리는 주변지반의 지보효과를 활용하는 터널굴착공법이다. 따라서 실제 지반조건이 원설계조건 보다 역학적으로 불량한 경우 보강공법의 적용은 필수적이라 할 수 있으나, 합리적인 설계변경은 현실적으로 쉽지 않은 실정이다. 또한 현실적인 이유로 양방향으로 터널을 관통하는 설계법과 달리 종종 1방향 굴진으로 터널을 관통하는 경우가 있다. 그러나 이러한 1방향 굴진은 불가분 굴진 종점부에서 저토피 갱구를 향하게 되므로, 지반이 연약한 경ㅇ우 막장 붕괴의 위험이 매우 높은 것으로 알려져 있다. 본 터널은 설계 시 갱구부 지반을 풍화암과 연암으로 보고 설계 하였으나, 실제 굴착 시 확인된 지층은 핵석을 포함한 실트질모래(SP-SM)로 판명되었다. 더구나 터널굴진 방향에 있어서도 양방향 굴착이 아닌 저토피 갱구를 향한 1방향 굴진을 실시하였으며, 이러한 시공 중에 터널관통을 불과 19m 남겨둔 갱구부에서 막장부괴와 동시에 상부사면 함몰이 발생하였다. 본 연구는 토사터널 갱구부 1방향 굴진 시 발생한 막장붕괴 보강사례로서, 지상보강(시멘트밀크 그라우팅)과 갱내보강(방사상 FRP보강그라우팅) 그리고 인버트폐합을 실시하여 성공적으로 터널시공을 완료한 사례연구이다. 본 사례는 향후 토사터널 갱구부의 설계와 시공에 유용한 참고자료가 될 것이다.

• Resources Recycling
• /
• v.8 no.3
• /
• pp.37-42
• /
• 1999

Ths sludy was canied out to recover gold and sllics from abandoned gold mine talings with about 4.5 ghonAu and 84.88 wt% SOz. Tl~bee nef~cialiop~ro~c esses including crushing, screening, magnelic and gravity (humprey sp~rals,h aking table) separation \ulcornervex employed. Results were Feasible to rccovn h e gold concentrates (307.1 gltoilon .4u . 0.60 wr%, 97.7 giton Au : 0.27 wl%, 15.3 &/ton Au . 5.23 wt%, 21.2 g/ton Au : 2.42 wl%) and silica (96.40 wi% SiO\ulcorner yield 60 65 ~ 1 % )

• The Journal of Korean Society for Radiation Therapy
• /
• v.15 no.1
• /
• pp.19-27
• /
• 2003

I. Purpose In special cases of Total Body Irradiation(TBI), Half Body Irradiation(HBI), Non-Hodgkin's lymphoma, E-Wing's sarcoma, lymphosarcoma and neuroblastoma a large field can be used clinically. The dose distribution of a large field can use the measurement result which gets from dose distribution of a small field (standard SSD 100cm, size of field under $40{\times}40cm2$) in the substitution which always measures in practice and it will be able to calibrate. With only the method of simple calculation, it is difficult to know the dose and its uniformity of actual body region by various factor of scatter radiation. II. Method & Materials In this study, using Multidata Water Phantom from standard SSD 100cm according to the size change of field, it measures the basic parameter (PDD,TMR,Output,Sc,Sp) From SSD 180cm (phantom is to the bottom vertically) according to increasing of a field, it measures a basic parameter. From SSD 350cm (phantom is to the surface of a wall, using small water phantom. which includes mylar capable of horizontal beam's measurement) it measured with the same method and compared with each other. III. Results & Conclusion In comparison with the standard dose data, parameter which measures between SSD 180cm and 350cm, it turned out there was little difference. The error range is not up to extent of the experimental error. In order to get the accurate data, it dose measures from anthropomorphous phantom or for this objective the dose measurement which is the possibility of getting the absolute value which uses the unlimited phantom that is devised especially is demanded. Additionally, it needs to consider ionization chamber use of small volume and stem effect of cable by a large field.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.515-524
• /
• 2019

The purpose of this study is to investigate the effects of artificial disturbance by analyzing and comparing the survey data of the Yeongju dam located in Yeongju-si, Gyeongbuk before and after impoundment. We surveyed four sites between the downstream of sediment control to the downstream of Yeongju Dam four times between April and October 2018. The macroinvertebrate data before the survey were gathered from the literature. The total number of benthic macroinvertebrates we observed was $35,037ind./m^2$, including 77 species, 48 families, 14 orders, 7 classes, and 3 phyla. The result of the community analysis showed that the dominant index increased from 0.44(${\pm}0.11$) before impoundment to 0.62(${\pm}0.16$) after impoundment. The diversity index increased from 2.26(${\pm}0.30$) to 1.75(${\pm}0.45$), the evenness index from 0.75(${\pm}0.10$) to 0.66(${\pm}0.14$), and the richness index from 3.11(${\pm}0.98$) to 2.25(${\pm}0.81$). The most dominant species changed from Hydropsychidae spp. to Chironomidae sp. The result of the Principal Components Analysis (PCA) based on Axis 1 showed that the sites of 2014 and Hydropsychidae spp. had a negative value, while the sites of 2018 and Chironomidae sp. had a positive value. In all study sites, the dominance increased while the diversity decreased. The community change was the largest in St. 2. The results of the functional group analysis showed that the scrapers increased while gathering-collectors increased among the functional feeding group and that the clingers decreased while borrows increased among the habitat oriented group. The Benthic Macroinvertebrate Streambed Index (BMSI) decreased from an average of 57.1(${\pm}8.0$, C class) to an average of 30.0(${\pm}12.1$, C class). St. 3 and St. 4, in particular, showed a high reduction rate.