• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.27-28
• /
• 2018

In this study, water vapor pressure and restrained stress were evaluated by ring-type restrained condition for compressive strength 60 and 80MPa concrete. Experimental results show that the 80MPa concrete has higher water vapor pressure and restraint stress than the 60MPa concrete, resulting in spalling occurrence. It is because, the higher the compressive strength of the concrete, the more dense the internal structure is formed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.1
• /
• pp.28-38
• /
• 2009

Numerical simulation is performed for microdroplet deposition on a pre-patterned micro-structure. The liquid-air interface is tracked by a level-set method, which is improved by incorporating a sharp-interface modeling technique for accurately enforcing the matching conditions at the liquid-gas interface and the no-slip condition at the fluid-solid interface. The method is further extended to treat the contact angle condition at an immersed solid surface. The present computation of a patterning process using microdroplet ejection demonstrates that the multiphase characteristics between the liquid-gas-solid phases can be used to improve the patterning accuracy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.8
• /
• pp.523-529
• /
• 2010

We investigate two-dimensional laminar flow around rectangular cylinders placed in a uniform stream. Numerical simulations are performed, using finite volume method, in the ranges of $50{\leq}Re{\leq}150$ and $0.1{\leq}W/H{\leq}1.0$, where Re and W/H are the Reynolds number and the width-to-height ratio, respectively. The immersed boundary method is used to handle the rectangular cylinder in a rectangular grid system. Comparisons with the previous results show good agreement in Strouhal number, drag and lift coefficient. The present study reports the detailed information of flow structure at different width-to-height ratios in the ranges of $50{\leq}Re{\leq}150$.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.171-174
• /
• 2011

In this paper, transformed IFA design is proposed to improve the antenna gain of GSM/DCS/PCS band. New antenna structure has been approved to be more convenient matching in the mobile phone terminal and increase gains and expansion bandwidth through the simulation and real measurement. According to measurement, it's shown 1.57dB higher average gain than conventional IFA.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4155-4160
• /
• 2012

We characterized the physisorption of p-iodo-phenyl octadecyl ether molecules (I-POE) onto superlattice regions of graphite surfaces using scanning tunneling microscopy (STM). The formation of self-organized I-POE monolayers does not affect the overall structures of moir$\acute{e}$ patterns and their modulation periods. However, the packing density of the I-POE monolayer and the orientations of lamella structures were sensitive to the underlying superlattice structure. Depending on the bias voltage, the STM images selectively showed moir$\acute{e}$ pattern, I-POE layer, or both. Reflecting the local density of states at a certain energy level, the STM images thereby revealed the relative energy level scale of the superlattice with respect to the molecular orbitals of I-POE.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.995-998
• /
• 2007

Pentacene moiety has been widely studied in Organic Thin-Film Transistor (OTFT) device as a channel layer because of high carrier mobility. In this study, we have fabricated vertical type Organic Static Induction Transistors (SITs) using pentacene, 6,13-Dinaphthalen-1-ly-Pentacene (1-DNP, 3), and 6,13-Dinaphthalen-2- ly-Pentacene (2-DNP, 4). 1-DNP and 2-DNP have same naphtyl group with pentacene, but different linked position and spatial arrangement. We have checked the static characteristics of materials in vertical type SITs device. We found that pentacene has as on/off ratio of 14.56, 1-DNP and 2-DNP shows as on/off ratio of 36.58 and 6.61 at VDS = 2V in SIT, respectively.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.1
• /
• pp.36-40
• /
• 2016

This paper is about the analysis on the vibration characteristic of tooling units on the precision automatic lathe. The vibration characteristic of the machine tool is emphasized in accordance with the high precision of the various industries Including the various semiconductor devices and components sector. In this paper, the vibration analysis was performed in designed tooling units of precision automatic lathe. Through the analysis, it is calculated that the frequency of distribution in certain areas by review the resonant frequency and the amount of deformation. And designed model was verified to be a stable structure.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1961-1964
• /
• 2010

국내 하천개발은 시대의 요구에 따라 이 치수 목적에서 친수성을 중시한 생태하천으로 꾸준히 진화해 왔으며, 시대적 목적에 의한 다양한 수공구조물이 하천에 설치되고 있다. 특히 최근에는 수제와 여울, 소와 같은 생태하천 복원 및 자연재해 저감을 위한 다목적 수공구조물에 대한 관심이 증대되고 있다. 그러나 이들의 연속구조물 설치에 따른 수리학적 특성 변화에 대한 연구는 미흡한 실정이다. 본 연구에서는 하도 횡단구조물의 연속 설치특성(월류비와 간격비)에 따른 흐름지배인자의 변화특성을 분석하였다. 연속 횡단구조물의 월류비와 간격비에 따른 조도계수의 변화를 계측 분석하였다. 실험 분석 결과 세굴에 영향을 주는 전단속도는 간격비(w/k)와 월류비(H/k) 및 Re수의 함수가 되는 흐름특성을 확인할 수 있었다. 또한 간격비(w/k)와 월류비(H/k), Re수와 U/U*의 관계를 제시함으로써 하도횡단 연속구조물 설계를 위한 기초 자료를 제공하고자 하였다.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1247-1252
• /
• 2006

This Report explains a plan for the application and construction about BOM(Bill Of Material) in charge of primary part of the RIMS(Rolling-Stock Information Maintenance System) maximizing the RIMS's reliability. The BOM system of the Seoul Metro is accomplished the frequent changes of the structure and design through the OEM(Original Equipment Manufacturer) and the maintaining and repairing work and also The BOM system is constructed so that Seoul Metro can solve all problems of the composition change, Rolling-Stock construction, changeful history management. In addition the BOM system of the Seoul Metro is considered the applicative side of the technical data, information of the material, expediency and hindrance analysis.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.103-105
• /
• 2003

A chiral stationary phase (CSP) was synthesized by the modification of the chitosan using N-nicotinoyl phenylalanine and 3, 5-dimethylphenylisocyanate . The CSP based on the chitosan was then characterized in terms of their chemical structure and physical properties. To test its performance as a CSP, the silica powder with 5 ${\mu}{\textrm}{m}$ of diameter were coated with the CSP to pack a column for High Performance Liquid Chromatograph (HPLC). Using the packed column, several racemates were tried to separate under various separation conditions with different compositions of eluents.