• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.193-199
• /
• 2023

In this study, an analysis was conducted to analyze the structural stability of the piezoelectric power generation module and to determine the optimal burying hole interval for concrete, the installation site of the power generation module. A piezoelectric element refers to a functional ceramic having a piezoelectric direct effect that converts mechanical energy into electrical energy and a piezoelectric reverse effect. In the analysis of the piezoelectric power generation module, the load condition was applied with about 16 tons and a total of 10 wheels in consideration of the container trailer. The purpose was to evaluate the stability of major components of the piezoelectric power generation module through finite element analysis. In order to determine the optimal burying location of the concrete ground for burying the piezoelectric power generation module, the stability of the ground structure according to the distance of the holes was determined. As a result of the analysis, the maximum stress of the piezoelectric power generation module was generated in the support spring, showing a stress of about 276.7 MPa. It was found that the spacing of holes for embedding the piezoelectric power generation module should be set to a minimum of 100 mm or more.

• Membrane Journal
• /
• v.33 no.4
• /
• pp.201-210
• /
• 2023

Dust filter membranes play a crucial role in human life and various industries, as they contribute to several important aspects of human health, safety, and environmental protection. This study presents the development of a polysulfone@polyphenylene sulfide/polytetrafluoroethylene (PSf@PPS/ePTFE) composite dust filter membrane with excellent thermal stability and adhesion properties for high-temperature conditions. FT-IR analysis confirms successful impregnation of PSf adhesive onto PPS fabric and interaction with ePTFE support. FE-SEM images reveal improved fiber interconnection and adhesion with increased PSf concentration. PSf@PPS/ePTFE-5 exhibits the most suitable porous structure. The composite membrane demonstrates exceptional thermal stability up to 400℃. Peel resistance tests show sufficient adhesion for dust filtration, ensuring reliable performance under tough, high-temperature conditions without compromising air permeability. This membrane offers promising potential for industrial applications. Further optimizations and applications can be explored.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.707-716
• /
• 2009

The role of cost modeller is to facilitate the design process by systematic application of cost factors so as to maintain a sensible and economic relationship between cost, quantity, utility and appearance which thus helps in achieving the client's requirements within an agreed budget. There are a number of research on cost estimates in the early design stage based on the improvement of accuracy or impact factors. It is common knowledge that cost estimates are undertaken progressively throughout the design stage and make use of the information that is available at each phase, through the related research up to now. In addition, Cost estimates in the early design stage shall analyze the information under the various kinds of precondition before reaching the more developed design because a design can be modified and changed in all process depending on clients' requirements. Parametric cost estimating models have been adopted to support decision making in a changeable environment, in the early design stage. These models are using a similar instance or a pattern of historical case to be constituted in project information, geographic design features, relevant data to quantity or cost, etc. OLAP technique analyzes a subject data by multi-dimensional points of view; it supports query, analysis, comparison of required information by diverse queries. OLAP's data structure matches well with multiview-analysis framework. Accordingly, this study implements multi-dimensional information system for case based quantity data related to design information that is utilizing OLAP's technology, and then analyzes impact factors of quantity by the design criteria or parameter of the same meaning. On the basis of given factors examined above, this study will generate the rules on quantity measure and produce resemblance class using clustering of data mining. These sorts of knowledge-base consist of a set of classified data as group patterns, of which will be appropriate stand on the parametric cost estimating method.

• Journal of Information Technology Services
• /
• v.22 no.4
• /
• pp.171-184
• /
• 2023

FinTech, which has brought innovation to the financial industry thanks to the advancements in ICT since 2010, has contributed to the growth of the financial ecosystem and increased consumer benefits. Furthermore, there has been a growing demand for social responsibility and sustainability in financial institutions, which have a significant impact on governments, businesses, and people's lives. Despite this, many FinTech companies and traditional financial institutions are still in the early stages of establishing ESG (Environmental, Social, and Governance) management philosophy or lack long-term plans. In this study, we aim to examine the impact of ESG management on the FinTech industry, focusing on representative domestic cases, and derive policy and institutional measures to spread it in the financial industry. Specifically, we will adopt MSCI rating indicators, which are internationally accepted by various industries such as manufacturing, healthcare, and transportation, to evaluate the 35 ESG management subcategories of FinTech companies. As a result, a total of 22 compliance items were disclosed in the ESG report, and it was possible to confirm the detailed management. Through this, we intend to propose effective management strategies for the organizational structure, operations, programs, and performance evaluation of FinTech companies, which are positioning themselves as sustainable growth drivers in the domestic industry.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.178-178
• /
• 2022

일반적으로 하천은 상류에서 하류로 흐르지만, 하구에서 일어나는 해안으로부터의 염수의 역류 혹은 상류에서 홍수 발생 시 순간적으로 나타나는 역류 등 주 흐름을 거스르는 흐름이 종종 발생하는데 이는 예상치 못한 피해를 가져올 수 있으므로 최대한 방지해야 한다. 즉, 양방향 흐름이 일어나는 지역을 단방향 흐름으로 바꿔줄 수 있는 수리 구조물의 설치가 필요하다. 역방향 흐름을 제어하는 대표적인 예로는 보가 있는데, 보는 충분한 수위 확보뿐만 아니라 하구에서 역류하는 해수를 방지하는 역할도 한다. 다만, 상류와 하류를 수직적으로 분리함에 따라 물고기의 자유로운 이동을 제한하는 등 생태계를 단절시키는 부작용이 나타날 뿐만 아니라, 최근 정부의 정책에 따라 세종보, 죽산보 등의 보 해체 결정이 이루어지면서 이를 대체할 방안이 필요하다. 따라서 이번 연구에서는 수직적인 구조물이 아닌 수평적인 수리 구조물을 고안함으로써 생태계에 큰 영향을 주지 않으면서 가장 효과적으로 양방향 흐름을 제어할 수 있는 구조물 설계 모형을 탐구해보았다. 구조물 설계 아이디어는 심장의 판막에서 고안하였다. 판막은 특정한 방향성을 갖는 구조로 이루어져 있으면서 혈액의 역류를 방지하는 기관으로, 비슷한 방식으로 하천에도 특정 각도를 갖는 구조물의 설치를 통해 단방향 흐름을 유도할 수 있다고 판단하였다. 실제 하천 규모에서의 실험은 불가능하다고 판단, 전산 유체 프로그램 OpenFOAM을 이용하여 가상 수로의 모델링을 진행하였다. 얇은 판 형태의 흐름 제어 구조물을 수로 측면에 각각 설치 후, 같은 조건에서 정방향 흐름과 역방향 흐름에 대해 각각 시뮬레이션을 진행하였다. 이때, 두 흐름의 하류 유량 크기의 차이를 단방향 흐름을 정량화하는 수치로 산정한다. 시뮬레이션은 구조물과 흐름 방향이 이루는 각도, 구조물의 개수 및 간격, 구조물의 비대칭성 등 여러 가지 조건을 바꿔가면서 진행하고, 유속 분포 및 후류의 크기 등의 수리학적 현상을 파악하여 계산 결과를 분석한다. 분석 결과를 바탕으로 하류의 유량 차이가 가장 크게 나타나는 수리 구조물의 조건을 결정하고, 해당 구조물의 실제 적용 가능 여부를 판단한다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.225-230
• /
• 2023

In this study, the porous structure inside the hair were observed using an optical microscope without damaging the hair, and the porosity inside the hair was quantitatively expressed using the results. Experiments were conducted on the effect of the decrease in density inside the hair on the bending and tensile properties of the hair, and experiments on endogenous and extrinsic factors were conducted to find out the causes of the decrease in density inside the hair. As for the endogenous factor, the porosity of gray hair, one of the representative symptoms of aging, was compared with normal hair. As for extrinsic factors, it was observed that the internal density of hair decreased by surfactant and heat, which are factors that can cause hair damage in daily life. In addition, we confirmed whether it is possible to increase the internal density and luster of the hair by using an amino acids and material that can prevent hair lipid predisposition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.163-163
• /
• 2000

In this research, we used the ion irradiation technique which has an advantae in improving intentionally the properties of surface and interface in a non-equilibrium, instead of the conventional annealing method which has been known to improve the material properties in the equilibrium stat. Cu/Co multilayered films were prepared on SiN4/SiO2/Si substrates by the electron-beam evaporation for the Co layers and the thermal evaporation for the Cu layers in a high vacuum. The ion irradiation with a 80keV Ar+ was carried out at various ion doses in a high vacuum. Hysteresis loops of the films were investigated by magneto-optical polar Kerr spectroscopy at various experimental conditions. The change of atomic structure of the films before and after the ion irradiation was studied by glancing angle x-ray diffraction, and the intermixing between Co and Cu sublayers was confirmed by Rutherford backscattering spectroscopy. The surface roughness and magneto-resistance were measured by atomic force microscopy and with a four-point probe system, respectively. During the magneto-resistance measurement, we changed temperature and the direction of magnetization. From the results of experiments, we found that the change at the interfaces of the Cu/Co multilayered film induced by ion irradiation cause the change of magnetic properties. According to the change in hysteresis loop, the surface inplane component of magnetic easy axis was isotropic before the ion irradiation, but became anisotropic upon irradiation. It was confirmed that this change influences the axial behavior of magneto-resistance. Especially, the magneto-resistance varied in accordance with an external magnetic field and the direction of current, which means that magneto-resistance also shows the uniaxial behavior.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.2
• /
• pp.121-139
• /
• 2023

Various tunnels such as road, subway, and railway are under construction and operation. Various types of linings are used for structural stability of tunnel structures, and concrete segment linings are mainly installed in TBM tunnel construction. In this paper, when a fire occurs in a tunnel, the impact on the concrete segment lining, which is the structure in the tunnel, and related standards, fire resistance evaluation and fire resistance method are investigated through literature review and related contents are presented. Through this, it is intended to provide an information for practitioners to secure the safety of concrete segment linings against tunnel fires.

• Membrane Journal
• /
• v.32 no.1
• /
• pp.23-32
• /
• 2022

Bacteria grow biofilm on various surface such as separation membrane, food packaging film and biomedical device. Growth of biofilm is associated with the formation of a complex structure of exopolysaccharides. Effect of antibacterial effect reduce drastically once the biofilm developed due to the difficulties in mass transport of antimicrobial agent. In order to enhance the antibacterial activity, surface of the membrane is modified, coated or immobilized with functional materials with biocidal properties. One of the idea is to introduce positive charge on the membrane surface by the presence of quaternary ammonium group which might displace divalent metal ion such as magnesium or calcium present in the bacteria cell wall. Efficacy of cell membrane disruption depends on the mobility of the agents available directly on the surface environment. In this review, various biocidal agents like quaternary ammonium group, helamine or zwitter ion containing membrane are discussed.

• Journal of Coastal Disaster Prevention
• /
• v.6 no.3
• /
• pp.111-120
• /
• 2019

In coastal morphological modelling, there are a number of input factors: wave height, water depth, sand particle size, bed friction coefficients, coastal structures and so forth. Measurements or estimates of these input data may include uncertainties due to errors by the measurement or hind-casting methods. Therefore, it is necessary to consider the uncertainty of each input data and the range of the uncertainty during the evaluation of numerical results. In this study, three uncertainty factors are considered with regard to the prediction of coastal erosion in Ilsan beach located in Ilsan-dong, Ulsan metropolitan city. Those are wave diffraction effect of XBeach model, wave input scenario and the specification of the coastal structure. For this purpose, the values of mean wave direction, significant wave height and the height of the submerged breakwater were adjusted respectively and the followed numerical results of morphological changes are analyzed. There were erosion dominant patterns as the wave direction is perpendicular to Ilsan beach, the higher significant wave height, and the lower height of the submerged breakwater. Furthermore, the rate of uncertainty impacts among mean wave direction, significant wave height and the height of the submerged breakwater are compared. In the study area, the uncertainty influence by the wave input scenario was the largest, followed by the height of the submerged breakwater and the mean wave direction.