• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.204.2-204.2
• /
• 2013

Wide band gap II-VI semiconductors have attracted the interest of many research groups during the past few years due to the possibility of their applications in light-emitting diodes and laser diodes. Among the II-VI semiconductors, ZnO is an important optoelectronic device material for use in the violet and blue regions because of its wide direct band gap (Eg ~3.37 eV) and large exciton binding energy (60 meV). F-doped ZnO (FZO) and undoped ZnO thin films were grown onto quartz substrate by the sol-gel spin-coating method. The doping level in the solution, designated by F/Zn atomic ratio of was varied from 0 to 5 in 1 steps. To investigate the effects of the structure and optical properties of FZO thin films were investigated using X-ray diffraction (XRD), UV-visible spectroscopy, and photoluminescence (PL). In the XRD, the residual stress, FWHM, bond length, and average grain size were changed with increasing the doping concentration. For the PL spectra, the high INBE/IDLE ratio of the FZO thin films doping concentration at 1 at.% than the other samples.

• Korean Journal of Materials Research
• /
• v.10 no.10
• /
• pp.698-702
• /
• 2000

The characteristics of optical absorption in $Al_{0.24}Ga_{0.76}As/GaAs$ multi-quantum wells(MQWs) structure were investigated by using the surface photovoltage(SPV). The Spy features near 1.42 eV showed two overlapping signals. By chemical etching, we found associated with the GaAs substrate and the GaAs cap layer. The Al composition(x=24 %) was determined by Kuech's composition formula. In order to identify the transition energies. the experimentally observed energies were compared with results of the envelope function approximation for a rectangular quantum wells An amplitude variation of the relative Spy intensity from the GaAs substrate, llH, and llL was observed at different light intensities. A variation in the SPY line shape of the transition energies were observed with decreasing tempera­t ture.

• ALGAE
• /
• v.28 no.4
• /
• pp.331-341
• /
• 2013

Rhinomonas reticulata var. atrorosea G. Novarino is a photosynthetic marine flagellate that is known to have typical characteristics of cryptomonads. We examined the flagellar apparatus of R. reticulata var. atrorosea by transmission electron microscopy. The major components of the flagellar apparatus of R. reticulata var. atrorosea consisted of four types of microtubular roots (1r, 2r, 3r, and mr), a non-keeled rhizostyle (Rhs), mitochondrion-associated lamella (ML), two connections between basal bodies, a striated fibrous root (SR) and a striated fiber-associated microtubular root (SRm). Four types of microtubular roots originated near the ventral basal body and extended toward the left side of the basal bodies. The non-keeled Rhs originated at the Rhs-associated striated fiber, which was located between two basal bodies and extended into the middle of the cell. The ML was a plate-like fibrous structure associated with mitochondria and originating from a Rhs-associated fiber. It split into two parts and extended toward the dorsal-posterior of the cell to a mitochondrion. The SR and SRm extended parallel to the anterior lobe of the cell. The overall configuration of the flagellar apparatus in R. reticulata var. atrorosea was similar to the previously reported descriptions of those of Cryptomonas paramecium, C. pyrenoidifera, C. ovata, Hanusia phi, Guillardia theta, and Proteomonas sulcata. However, the flagellar apparatus system of R. reticulata var. atrorosea was more complex than those of other cryptomonad species due to the presence of an additional microtubular root and other distinctive features, such as a rhizostyle-associated striated fiber and large ML.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.1043-1050
• /
• 2014

An air-core vortex is generated during draining after stirring a rotating cylindrical tank or after filling it with water. The formation of the air-core vortex and the time of its formation are dependent on drain conditions such as the dimensions of the tank, the initial rotation or stirring speed, and the shape of the drain port. In this study, a draining process using a two-stage drain port was numerically investigated. The length and radius of the first drain stage located in the lower part of the drain port were kept constant, whereas the radius of the second drain stage was varied for simulating the draining process. The simulation was conducted by considering an axisymmetric swirling flow for all cases. The declining water level was monitored by an interface capturing method. Further, the effects of the radius of the second drain stage on the time of formation of the air-core vortex and the internal flow structure were investigated.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.226-230
• /
• 2005

Chitosan derivatives, 6-amino-6-deoxychitosan (6A6DC) was successively prepared as a reactive carbohydrate for the stabilization of epidermal growth factor (EGF) by the reactions of chitosan with tosyl chloride, sodium azide, and lithium aluminum tetrahydride. The structure of 6A6DC was confirmed by EA, FT-IR, $^1H-NMR$ and $^{13}C\{^1H\}-NMR$. The degree of substitution (ds) of amino groups in 6A6DC was determined to be 0.7. 6A6DC did not show any cytotoxicity on the normal human dermal fibroblast (NHDF) proliferation at least in the range tested (0.3 g/mL 600 g/mL) and was considered as a suitable material for the stabilization of EGF against proteolytic degradation due to its non-cytotoxicity and high reactivity.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.187-193
• /
• 2005

The photocatalyst $TiO_2$ thin film was made from titanium (IV) isopropoxide, ethanol, and HCl by sol-gel method. The surface observation by SEM showed the sample that was coated 5 times at $500^{\circ}C$ had good properties. The component ratio, in atom% of O : Ti by EDX analysis, of 61 : 39 by spin coating was superior than dip coating. It was found that crystal structure changed from anatase phase to rutile phase as a function of the temperature of thin film fabrication, and this was measured by XRD. The photolysis efficiency of total organic compounds (TOC) by lighting UV beam on $TiO_2$ thin film showed 20%~65% within 1 h, and decreased slowly thereafter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3315-3318
• /
• 2012

In this study, Fe-base alloy powder was prepared by gas atomizing method. Shape and crystal structure of the powder were investigated by FESEM, X-ray diffraction, and DSC. The powder was produced in a spherical shape, with a size of 45 ~ 90 ${\mu}m$. X-ray diffraction analysis revealed that the powder was fully amorphous, showing typical broad amorphous peak. From DSC analysis, Tg and Tx that are generally found in a bulk amorphous alloy were also observed in the alloy powder. Tg and Tx of the powder were $530^{\circ}C$ and $560^{\circ}C$, respectively. These results suggest us that the bulk amorphous alloy (BMG) powder prepared in this study is applicable to laser welding.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.42-55
• /
• 1984

The direction of scientific researches on tree improvement and forest management in several universities and research institutes in Japan can be summarized as follows: They put a great emphasis on sugi, Cryptomeria japonica and cypress, Chamaecyparus oblusa which are two major conifer species largerly planted in the Japanese forestry. In the research of sugi, a great concern has been made in evaluating inheritance of forest tree, quantitative characters and genetic parameter of growth, and in breeding for resistance to diseases and insects and to all the natural calamities. Interaction between environmental conditions and genetic nature of tree can be concerned factors in relation with forest damage, together with silvicultural conditions and pest infestation. Selfing hybrids of $F_1$ made from crossing twisted-leaf sugi, defomity leaf type and midori sugi, normal leaf type segregated the normal needle, twisted needle, green leaf and albino leaf type. It seemed that separation of many defomity individuals can be governed by two dominant complementary genes and from the near loci of which it was detected lethal genes. 52% of Japanese forestry is occupied by the small forest landowners like Korean forestry. This made difficulty for forest improvement such as progressive afforestation and for capital accumulation form forestry. The Forest Corporation was established at first in 1959 to aming at productive forestry structure and forest management, and afforestation. For these purpose, 35 Forest Corporations are at moment operating throughout Japan. However, investment in forestry business becomes less attractive since the wage in forest production duction increased in higher trend. than timber price. Therefore, an artifical afforestation becomes yearly decreased. At present. the self-sufficient rate of timber production in Japan is about 35%, and so a great effort is being made to increase self-sufficient rate of timber production.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.5
• /
• pp.415-425
• /
• 2016

This paper presents the results of a study on the control system for an underwater manipulator controlled by a master arm through LED communication. The underwater manipulator was designed to be actuated by electric motors with six degrees of freedom for operation in various underwater environments. The master arm, which can remotely control the manipulator, was designed with a structure similar to the manipulator for convenient control. An underwater LED communication system was developed to communicate between the master arm and underwater manipulator. An integrated control program was developed that included data conversion, monitoring, datalogging, and filtering. Some experiments were performed to verify the performance of the developed control system of the master arm, manipulator, and LED communication system, and the results are presented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.233-233
• /
• 2010

CdS thin films were deposited on glass substrates by R.F. magnetron sputtering method and some of the samples were treated by rapid thermal annealing (RTA) process. Effects of thermal annealing on structural and optical properties were investigated at different temperatures ranging from 100 to $600^{\circ}C$. The crystallographic structure of the films and the size of the crystallites in the films were studied by X-ray diffraction. The crystallite sizes were found to increase, and the X-ray diffraction patterns were seen to sharpen by annealing. Optical properties of the films were calculated using the envelope method and the photoluminescence measurements. The optical properties of the films were seen to be dependent on the film thicknesses. The energy gap of the films was found to decrease by annealing. The band edge sharpness of the optical absorption was seen to oscillate by thermal annealing. Annealing over $400^{\circ}C$ was seen to degrade the optical properties of the film. The best annealing temperature for the films was found to be $400^{\circ}C$ from the optical properties. It is observed that the CdS film annealed at $400^{\circ}C$ reveals the strongest UV emission intensity and narrowest full width at half maximum among the temperature ranges studied. The enhanced UV emission from the film annealed at $400^{\circ}C$ is attributed to the improved crystalline quality of CdS thin film due to the effective relaxation of residual compressive stress and achieving maximum grain size. The results show that heat treatments under optimal annealing condition can provide significant improvements in the properties of CdS thin films.