• Journal of Chest Surgery
• /
• v.36 no.2
• /
• pp.113-117
• /
• 2003

Idiopathic mediastinal fibrosis is very rare. We report two cases of a 41-year-old man and 65-year-old man who presented with backache and vocal cord palsy, subsequently confirmed to be idiopathic mediastinal fibrosis. Preoperative chest computed tomography showed a mediastinal mass and thoracoscopic biopsy was preformed. The mass was hard, dense and partially calcified, and adhered the adjacent mediastinal structure. Postoperative medical treatment was not performed, and during 5 and 7 month follow-up has not demonstrated any complication.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.311-312
• /
• 2010

The fabricated photovoltaic cells based on PIN heterojunctions, in this study, have a structure of ITO/poly(3, 4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS)/donor/donor:C60(10nm)/C60(35nm)/2, 9-dimethyl-4, 7-diphenyl-1, 10-phenanthroline(8nm)/Al(100nm). The thicknesses of an active layer(donor:C60), an electron transport layer(C60), and hole/exciton blocking layer(BCP) were fixed in the organic photovoltaic cells. We investigated the performance characteristics of the PIN organic photovoltaic cells with copper phthalocyanine(CuPc), tetracene and pentacene as a hole transport layer. Discussion on the photovoltaic cells with CuPc, tetracene and pentacene as a hole transport layer is focussed on the dependency of the power conversion efficiency on the deposition rate and thickness of hole transport layer. The device performance characteristics are elucidated from open-circuit-voltage(Voc), short-circuit-current(Jsc), fill factor(FF), and power conversion efficiency($\eta$). As the deposition rate of donor is reduced, the power conversion efficiency is enhanced by increased short-circuit-current(Jsc). The CuPc-based PIN photovoltaic cell has the limited dependency of power conversion efficiency on the thickness of hole transport layer because of relatively short exciton diffusion length. The photovoltaic cell using tetracene as a hole transport layer, which has relatively long diffusion length, has low efficiency. The maximum power conversion efficiencies of CuPc, tetracene, and pentacene-based photovoltaic cells with optimized deposition rate and thickness of hole transport layer have been achieved to 1.63%, 1.33% and 2.15%, respectively. The photovoltaic cell using pentacene as a hole transport layer showed the highest efficiency because of dramatically enhanced Jsc due to long diffusion length and strong thickness dependence.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.6
• /
• pp.1094-1098
• /
• 2010

With the high prevalence of functional dyspepsia in the world, it was difficult to get objective diagnosis, treatment and assessment for the reason that there were many different symptoms and signs. The purpose of this study is to develop a standard instrument of pattern identification for functional dyspepsia which will be applied to clinical research. The items and structure of the instrument were based on review of published literature. The advisor committee on this study was organized by 11 oriental division of gastroenterology professors of oriental medical colleges nationwide. The experts discussed developing the instrument, and we also took professional advices by e-mail. We divided the symptoms and signs of functional dyspepsia into 6 pattern identification, such as disharmony of liver and stomach, retention of undigested food, damp-heat in the spleen and stomach, simultaneous occurrence of cold and heat syndromes, deficiency and cold of the spleen and the stomach, and insufficiency of stomach eum. We got the mean weights to each symptom of six pattern identification which had been scored on a 5-point scale ranging from 1 to 5 by the 11 experts. We made out the Korean instrument of the pattern identification composed of 45 questions for functional dyspepsia. Although there are some limitations in our study, the instrument is meaningful and certain worth of its own. We hope to improve the instrument through the further clinical studies and discussions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.146-146
• /
• 2011

The blue light emitting diode (LED) structure based on non-polar a-plane (11-20) GaN which was coated TiO2 nanoparticles using spin coating method was grown on r-plane (1-102) sapphire substrates to improve light extraction efficiency. We report on the emission and structural properties with temperature dependence of photoluminescence (PL) and x-ray rocking curves (XRC). From PL results at 13 K of undoped GaN samples, basal plane stacking fault (BSF) and near band edge (NBE) emission peak were observed at 3.434 eV and 3.484 eV, respectively. We also found the temperature-induced band-gap shrinkage, which was fitted well with empirical Varshini's equation. The PL intensity of TiO2 nanoparticles ?coated multiple quantum well (MQW) sample is decayed slower than that of no coating sample with increasing temperature. The anisotrophic strain and azimuth angle dependence in the films were shown from XRC results. The full width at half maximum (FWHM) along the GaN [11-20] and [1-100] directions were 564.9 arcsec and 490.8 arcsec, respectively. A small deviation of FWHM values at in-plane direction is attributed to uniform in-plane strain.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.454-454
• /
• 2011

Graphene shows unusual electronic properties, such as carrier mobility as high as 10,000 $cm^2$/Vs at room temperature and quantum electronic transport, due to its electronic structure. Carrier mobility of graphene is ten times higher than that of Silicon device. On the one hand, quantum mechanical studies have continued on graphene. One of them is quantum Hall effect which is observed in graphene when high magnetic field is applied under low temperature. This is why two dimension electron gases can be formed on Graphene surface. Moreover, quantum Hall effect can be observed in room temperature under high magnetic field and shows fractional quantization values. Quantum Hall effect is important because quantized Hall resistances always have fundamental value of h/$e^2$ ~ 25,812 Ohm and it can confirm the quantum mechanical behaviors. The value of the quantized Hall resistance is extremely stable and reproducible. Therefore, it can be used for SI unit. We study to measure quantum Hall effect in CVD graphene. Graphene devices are made by using conventional E-beam lithography and RIE. We measure quantum Hall effect under high magnetic field at low temperature by using He4 gas closed loop cryostat.

• Journal of Engineering Education Research
• /
• v.19 no.2
• /
• pp.45-52
• /
• 2016

The employment rate of a college has long been one of the most important elements in college survival strategies. Employment rates may not be key to colleges' survival in other countries, but they are fundamental to colleges in Korea as seen in the Korean government-led National Competency Standard (NCS), which has been underway since its introduction to colleges in Korea. Against this backdrop, if the engineering accreditation system can contribute to improving employment rate in this context, it can take root more quickly. The process conducive to improving employment rates can be classified as both direct and indirect methods. With dwindling school-age population having impacts on colleges and universities, the environment and the education directions of colleges have rapidly been shifting since the introduction of the NCS. Therefore, various survival strategies for colleges need to be developed. An indicator of employment rate of college graduates is among the most important things during this transition process. The Department of Mechanical Engineering at Koje College has consistently shown good records during the past 5 years by matching the accreditation schemes and employment strategies. The department will help put in place the engineering technology education accreditation system at the college through its various innovative and effective programs. To formulate a better employment strategy, it is needed to reflect and consolidate the engineering accreditation scheme into the existing employment policy of college. In short, this paper examines both the engineering accreditation scheme and the employment policy in ways that helps produce a coupling matrix structure. This study looks into the measures for improving employment rates by better adjusting the engineering education methods under the accreditation scheme.

• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.108-120
• /
• 2017

Modern watermelon cultivars (Citrullus lanatus [Thunb.] Matsum.& Nakai var. lanatus) have fruits with diverse phenotypes, including fruit shape, rind patterns, and flesh color. Molecular markers enable efficient selection of plants harboring desirable phenotypes. In the present study, publicly available DNA markers tightly linked to fruit shape, rind stripe pattern, and flesh color were evaluated using 85 watermelon accessions with diverse fruit phenotypes. For fruit shape, the dCAPS SUN - Cla011257 marker revealed an 81% of marker - trait match for accessions with elongated or round fruits. For rind stripe pattern, the SCAR wsb6-11marker was effective for selecting Jubilee-type rind pattern from other rind patterns. For flesh color, the Clcyb.600 and Lcyb markers derived from a mutation in the Lycopene ${\beta}$ - cyclase (Lcyb) gene, were effective at selecting red or yellow flesh. Forty-eight accessions possessing diverse fruit - related traits were selected as a reference array and their genetic relationships assessed using 16 SSR markers. At a coefficient of 0.11, the 48 accessions grouped into two major clades: Clade I and Clade II. Clade I subdivided further into subclades I - 1 and I - 2 at a coefficient of 0.39. All accessions with colored flesh were classified into Clade I, whereas those with white - flesh were classified into Clade II. Differences in fruit traits between subclades I - 1 and I - 2 were observed for rind pattern and fruit color; a majority of the accessions with Crimson-type striped or non-striped rind were grouped together in subclade I - 1, while most accessions in subclade I - 2 had a Jubilee - type rind stripe pattern. These results imply that reference array watermelon accessions possess distinguishable genetic structure based on rind stripe pattern. However, no significant grouping pattern was observed based on other fruit-related traits.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.433-437
• /
• 2007

Bis(dithiobenzil) metal complex, used as functional NIR absorbing dye and photostabilizer, was synthesized using bezoin and anisoin as intermediate compounds. And squarylium, a charge generation material, was synthesized to find its photostability effect. The structure of the product was determined by $^1H-NMR$ and FT-IR and the thermal property was analyzed by DSC and TGA. Optical property and photostability were determined by UV-Vis-NIR spectroscopy. High absorbance was obtained in the NIR range and maximum absorbing wavelength was shifted depending on the nature and position of substituent in the bis(dithiobenzil) metal complex. The photofading effect of squarylium decreased by the addition of bis(dithiobenzil) metal complex.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.3
• /
• pp.260-267
• /
• 2007

GPS adapter kit (GAK) is a GPS/INS guided range extension system to improve the accuracy and availability of existing dumb bombs. In this paper, a van test result of GPS/INS navigation module (NM) for guided bomb with GAK has been presented. The NM consists of a commercial MEMS IMU, embedded GPS receiver and navigation computer unit (NCU). The GPS receiver of NM was designed to use multiple antennas for satellite visibility and GPS attitude determination. The real-time navigation software was designed by modularized structure to guarantee the maintainability and extensibility. In order to evaluate the performance of the NM, a van test was preformed by using a high performance INS - Honeywell H-726 MAPS(Modular Azimuth Position System).The van test results show that the GAK NM with GPS attitude measurement gives better navigation performance than a conventional GPS/INS integration and good coasting capabilities under jamming environment.

• Applied Microscopy
• /
• v.22 no.2
• /
• pp.97-117
• /
• 1992

In order to study process of spermiogenesis of the Korean greater horseshoe bat, Rhinolophus ferrumequinum korai, the cycle of seminiferous epithelium was examined by the light and electron microscope and the following results were obtained based on the epithelial cell differentiation. 1. Spermiogenesis occurred from early July to mid-Octber, and spermatogenic activity was vigorous from mid-August to late September. Spermatocytes including spermatogonia were found to be degenerated in only July. It is deduced that the degeneration serves as the mechanism to regulate effective use of energy to prepare for mating and hibernating periods, and regulation of breeding cycle. 2. Spermiogenesis of the Korean greater horseshoe bat was divided according to differentiation of the cell structure, into Golgi, cap, acrosome, maturation and spermiation phases; Golgi, cap and spermiation phases were further divided into two steps of early and late phase respectively, and acrosome phase into three steps of early, mid and late phases, and maturation phase has only one step. Hence, the spermiogenesis consists of ten phases. The first research was done in this article on the changes of chromatin with nucleus, the time of appearance and disappearance of chromatin granules, in case of Korean greater horseshoe bat (Rhinolophus ferrumequinum korai). Chromatin granule began to be condensed in late Golgi and the condensation proceeded to form an irregular mass of a electron-dense chromatin in a form of circular cylinder in the center of nucleus at the phase of maturation. Finally, the chromatin condensation proceeded and perfect nucleus of sperm with homogeneous density was formed when the sperm was separated from Sertoli cell. Therefore, appearance and disappearance of chromatin granules occurred in the period of time between late Golgi and maturation phase, The tail of sperm began to develop in early cap phase, Numerous lipid droplets were obseved in the cytoplasm of spermatids during the maturation phase, which seemed to be used as energy source necessary to make mature sperm during spermiogenesis.