• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.505-513
• /
• 2014

This paper investigated the effect of joint on the earth pressure against an excavation wall in rockmass with the consideration of various rock and joint conditions. For this purpose, this study briefly reviewed of the previous earth pressure studies, and then numerical parametric studies were conducted based on the Discrete Element Method (DEM) to overcome the limitations of the previous studies. The numerical tests were carried out with the controlled parameters including rock types and joint conditions (joint shear strength, joint inclination angle, and joint set), and the magnitude and distribution characteristics of the induced earth pressure were investigated considering the interactions between the ground and the excavation wall. In addition, the earth pressures induced in rock stratum were compared with Peck's earth pressure for soil ground. The results showed that the earth pressure against an excavation wall in jointed rockmass were highly affected by different rock and joint conditions and thus different from Peck's empirical earth pressure for soil ground.

• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.638-642
• /
• 2010

After phthalonitrile derivatives were synthesized by the introduction of phenoxy, 2-naphthoxy or 4-trityl phenoxy group on ${\alpha}$- and ${\beta}$-position, oxovanadyl phthalocyanine (VOPc) derivatives containing electron-rich substituent group at different position were synthesized successfully in this investigation. The chemical structure of samples was determined by the means of $^1H$-NMR, MALDI-TOF mass spectroscopy, and FT-IR spectrometer. Also, optical and chemical properties were determined by the means of UV-Vis spectrometer, X-ray diffractometry, and thermo gravimetry. It was found that the maximum absorbing wavelength of VOPc derivatives ranged from 684 to 726 nm. Also, their solubility and Q-band were enhanced and shifted by the introduction of substitute group, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.297-304
• /
• 2012

For the assessment of the performance of a wind-turbine blade, a simulated loading test may be required. In this study, the blade behavior was investigated through numerical analysis using a dual-axis loading test, closely simulating the real operation conditions. The blade structure for the 100-kW-class wind-turbine system was modeled using the finite element (FE) program ANSYS. The failure criteria and buckling analysis under dual-axis loading were examined. The failure analysis, including fiber failure and inter-fiber failure, was performed with Puck's failure criterion. As the dual-axis load ratio increases, the relatively increased stress occurs at the trailing edge and skin surface 3300-3600 mm away from the root. Furthermore, it is revealed that increasing the dual-axis load ratio makes the location that is weakest against buckling move toward the root part. Thus, it is seen that the dual-axis load test may be an essential requirement for the verification of blade performance.

• Journal of the Korean Home Economics Association
• /
• v.50 no.7
• /
• pp.109-116
• /
• 2012

The purpose of this study is to develop a scale for evaluation of Parent's Literacy Interaction Rating Scale (PLIRS) for preschool children and to examine its validity and reliability. The participants of this study were 342 Korean mothers with children of 3 to 5 year olds. The methods for data analysis included item analysis, factor analysis for construct validity, Pearson correlations between PLIRS and two sub tests of EC-HOME for concurrent validity, and Cronbach's ${\alpha}$ for reliability. The item discrimination was determined by comparing the highest and lowest groups using Chi-square (${\chi}^2$), and Cramer's V. The 25 items of the scale were found to be satisfactory in item discrimination. The concurrent validity was also identified by correlation between PLIRS and two sub tests of EC-HOME. Factor analysis revealed that the structure of the PLIRS consisted of three factors: 'open interaction', 'directive interaction', and 'picture-book reading interaction'. 'Open interaction' is based on 'Whole Language Approach', such as 'I have my child write as he/she likes even if they spell wrongly.' 'Directive interaction' is based on 'Code Emphasis Approach', such as 'I have my child take dictation.' 'Picture-book reading interaction' is how parents read picture-book with her/his children, such as 'When I read a picture book to my child, I ask various questions about a book story.' The Cronbach's ${\alpha}$ for internal consistency reliability range was .78 to .87 for three subscales. It was concluded that PLIRS was valid and reliable to examine the literacy interaction between parents and children in home.

• The Journal of Fisheries Business Administration
• /
• v.45 no.1
• /
• pp.95-107
• /
• 2014

This study is aimed to analyze the economic performance of black rockfish aquaculture by standardizing cost structures by region and farming size. The result of survey on farming and sale condition in each region, stocking density, survival rate, juvenile price, and unit production was the highest at Yeosu and Tongyeong, Heuksando showed the lowest. While rearing period was the longest at Tongyeong, the shortest region was Yeosu and Wando. In farming cost structure by region, amount of feeing was the highest at Tongyeong and Yeosu, and the lowest was Heuksando. Cost of medicine was high in Wando and Taean region, Yeosu and Hecksando was low. In case of farm size, feed cost ratio was high in the order of medium(0.75ha), small(0.25ha) and large(1.25ha) size. Standard production cost at every farm size of Heuksando showed the lowest among these regions. Taean and Yeosu was middle, and Tongyeong and Wando was the highest. According to the income, profit rate and investment return of farm size in all regions, as the bigger farm size, the higher income and profit rate was revealed. However, in case of Wando, Taean, and Heuksando which regions has high investment return, medium farm size was higher than large size. The result of economic analysis according to various factors, economic feasibility of black rockfish aquaculture in marine floating cage was showed significant changes by rearing and market condition.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.59-64
• /
• 2013

In this paper, a capacitor multiplier with good frequency characteristics has been proposed. Effective capacitance of conventional capacitor multiplier decreases as frequency increases due to internal series resistance. On the other hand, the proposed capacitor multiplier using cascode structure has smaller internal resistance, thus shows good frequency characteristics. Conventional and proposed capacitor multiplier were fabricated using Samsung $0.13{\mu}m$ CMOS process and frequency characteristics of capacitor multipliers were measured using LPF. Measurement results show that the conventional capacitor multiplier has maximum 53% of capacitance error, however the proposed multiplier has less than 10% of capacitance error for the frequency change from 100kHz to 1MHz.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.1
• /
• pp.50-55
• /
• 2020

Porcelain insulators have been used for a long time in 154 kV power transmission lines. They are likely to be exposed to sudden failure because of product deterioration. This study was conducted to evaluate the quality of porcelain insulators. After stresses were applied, the damaged regions of aged insulators were investigated in terms of chemical composition, material structure, and other properties. For porcelain insulators that were in service for a long time, the mechanical failure load was 126 kN, whereas the average mechanical failure load was 167.3 kN for new products. It was also determined that corrosion occurred at the metal pin part due to the penetration of moisture into the gap between the pin and the ceramic. Statistical analyses of failure were performed to identify the portion of the insulators that were broken. Cristobalite porcelain insulators fabricated without alumina additives had a high failure rate of 54% for the porcelain component. In the case of the addition of Alumina (Al₂O₃) to the porcelain insulators to improve the strength of the ceramic component, a more frequent damage rate of the cap and pin of 73.3% and 27%, respectively, was observed. This study reports on the material component of SiO₂ and the percentage of alumina added, with respect to the mechanical properties of porcelain insulators.

• Journal of Broadcast Engineering
• /
• v.23 no.1
• /
• pp.104-114
• /
• 2018

Recently, as HTTP-based video streaming traffic continues to increase, Dynamic Adaptive Streaming over HTTP(DASH), which is one of the HTTP-based adaptive streaming(HAS) technologies, is receiving attention. Accordingly, many video quality control techniques have been proposed to provide a high quality of experience(QoE) to clients in a DASH environment. In this paper, we propose a new quality control method using ANFIS(Adaptive Network based Fuzzy Inference System) which is one of the neuro-fuzzy system structure. By using ANFIS, the proposed scheme can find fuzzy parameters that selects the appropriate segment bitrate for clients. Also, considering the characteristic of VBR video, the next segment download time can be more accurately predicted using the actual size of the segment. And, by using this, it adjusts video quality appropriately in the time-varying network. In the simulation using NS-3, we show that the proposed scheme shows higher average segment bitrate and lower number of bitrate-switching than the existing methods and provides improved QoE to the clients.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.400.1-400.1
• /
• 2016

Interfacial engineering approaches as an efficient strategy for improving the power conversion efficiencies (PCEs) of inverted polymer solar cells (iPSCs) has attracted considerable attention. Recently, polymer surface modifiers, such as poly(ethyleneimine) (PEI) and polyethylenimine ethoxylated (PEIE), were introduced to produce low WF electrodes and were reported to have good electron selectivity for inverted polymer solar cells (iPSCs) without an n-type metal oxide layer. To obtain more efficient solar cells, quantum dots (QDs) are used as effective sensitizers across a broad spectral range from visible to near IR. Additionally, they have the ability to efficiently generate multiple excitons from a single photon via a process called carrier multiplication (CM) or multiple exciton generation (MEG). However, in general, it is very difficult to prepare a bilayer structure with an organic layer and a QD interlayer through a solution process, because most solvents can dissolve and destroy the organic layer and QD interlayer. To present a more effective strategy for surpassing the limitations of traditional methods, we studied and fabricated the highly efficient iPSCs with mono-layered QDs as an effective multi-functional layer, to enhance the quantum yield caused by various effects of QDs monolayer. The mono-layered QDs play the multi-functional role as surface modifier, sub-photosensitizer and electron transport layer. Using this effective approach, we achieve the highest conversion efficiency of ~10.3% resulting from improved interfacial properties and efficient charge transfer, which is verified by various analysis tools.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.40-46
• /
• 2015

Many construction equipment or supporting structure should be installed in a field without appropriate anchorage to cause a collapse of those. Anchor length, anchor diameter, hooked or non hooked will be made and tested in the study. This one will be analyzed and compared with the previous study in order to find out some difference, strength by strength, based on this study. Embedded re-bar and the resistant capacity against pulled out force of re bar have been tested and analyzed by concrete design strength and rebar diameter in the study. 21Mpa and 24MPa compressive strength which are used in construction practice have been applied as variables. Those rebars are composed of D13, D16. D22 which are mostly used at construction sites. The followings are summarized as conclusions.1) ductility is not increased as rebar diameter becomes larger under the condition of non-hooked anchorage.2) those are two times of displacement difference between small diameter of rebar and large one with hooked anchorage of rebar while being 1/10 times difference with non-hooked condition but, only 10% difference of maximum load are shown, not conspicuously between hooked and non-hooked condition.3) displacement related to ductility can be three(3) times decreased if only concrete compressive strength and rebar diameter become larger with heavy support weight.