• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.89-92
• /
• 2009

In this paper, We observed degradation of general poly-cristalline silicon solar cell by light and heat. This is very important to define solar cell's characteristics. So we test eight cells that made of poly-cristalline silicon. We expect to the result of this experiment is useful for researching and measuring solar cell's characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1048-1051
• /
• 1992

The design method is a crucial factor for the successful operation of photovoltaic system. A design method is proposed and applied practically to a stand-alone system of 25KWp aimed at the power supply for a remote-island. In this paper the operation results of this system are discussed. In addition, the current status and future prospects at home and abroad on the development of photovoltaic systems are also described.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.288-291
• /
• 2007

Since the residential load is an AC load and the output of solar cell is a DC power, the photovoltaic system needs the DC/AC converter to utilize solar cell. In case of driving to interact with utility line, in order to operate at unity power factor, converter must provide the sinusoidal wave current and voltage with same phase of utility line. Since output of solar cell is greatly fluctuated by insolation, it is necessary that the operation of solar cell output in the range of the vicinity of maximum power point. In this paper, DC/AC converter is three phase PWM converter with smoothing reactor. And then, feedforward control used to obtain a superior characteristic for current control and digital PLL circuit used to detect the phase of utility line.

• 센서학회지
• /
• 제26권3호
• /
• pp.173-178
• /
• 2017

In this paper, we newly developed an omnidirectional receiver for visible light communication (VLC). The omnidirectional receiver was composed of a flexible solar cell attached on a cylindrical surface with its axis in vertical direction. The solar cell surface was symmetrical and showed an almost uniform receiving pattern in a horizontal plane. The maximum difference in a receiving pattern was within 7% of its peak value in a horizontal plane. This configuration is very easy to fabricate and useful in constructing wireless sensor networks in which one receiver needs to detect multiple LED signals in different directions.

• Current Photovoltaic Research
• /
• 제4권3호
• /
• pp.98-107
• /
• 2016

Third-generation photovoltaics are of low cost based on solution processes and are targeting a high efficiency. To meet the commercial demand, however, significant improvements of both efficiency and stability are required. In this sense, interfacial engineering can be useful key to solve these issues because trap sites and interfacial energy barrier and/or chemical instability at organic/organic and organic/inorganic interfaces are critical factors of efficiency and stability degradation. Here, we thoroughly review the interfacial engineering strategies applicable to three representative third-generation photovoltaics - organic, perovskite, colloidal quantum dot solar cell devices.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.65-65
• /
• 2008

본 논문의 목표는 유기태양전지의 재료적 특성중 반사율을 측정하여 가장 투명한 oranic solar cell을 제조하기 위한 기초자료를 도출하였다. 먼저 유기태양전지 재료중 일부인 PEDOT,PSS,MEH-PPV,P3HT를 수십 $\AA$ ~ 수백 $\AA$ 두께로 glass 기판위에 spin코팅하여 UV-VIS를 통해 파장열 반사 특성을 분석하였다. 또한, 동일한 시료를 사용하여 FESEM을 통한 표면 Morphology를 확인하였다. 최종적으로 가장 transparent 시료를 이용하여 oranic solar cell을 제작하여 efficiency와 reflectance characteristic를 측정하였다.

• 대한전자공학회논문지
• /
• 제21권1호
• /
• pp.45-50
• /
• 1984

결정면이 (100)인 실리콘 웨이퍼 위에 열확산(thermal diffusion)법을 이용하여 표면에 V형 흠이 형성된 N+P 태양전지를 제작하였다. (100) 실리콘 표면에 V형 홈을 형성시키기 위하여 이방성 부식용액으로는 etylendiamine, water, pyrocathecol 혼합용액을 사용하였다. 100mW/㎠의 조명아래에서 V형홈을 형성시킨 태양전지가 효율면에서 일반 평면 N+P 태양전지보다는 2.5∼3.5%, texturized 태양전지보다는 0.4∼0.6%정도의 증가를 보였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.957-960
• /
• 2003

Many solar cell way need to be connected by series or parallel to extract the high power Especially, during parallel operation to reduce circulation current the individual converter has to share and control the load current. Generally, Current Sharing(CS) can be implemented using droop and active current sharing method. In this paper, one 3[KW] PWM converter was replaced as one 3[KW] solar cell array(3 parallels, each parallel has twenty single modules), two 3[KW] solar cell way Is Paralleled to generate 6[KW] power. Also each converter used voltage-current controller and Automatic MSCPM(Master-Slave Current-programming Method) for current sharing(AS).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.972-977
• /
• 1998

This paper deals with stand-alone Photovoltaic system(SPVS) with charge and discharge controller. Main power source of SPVS are generally solar cell and battery. Therefore SPVS can be classified into variable types in accordance with connection method between battery and solar cell array. Mainly used one of them is direct connection type which has advantages such as simple structure and simple controller. However most big drawback of this system is energy loss by voltage disharmony between solar cell array and battery. Therefore SPVS with charge and discharge controller which can operate solar cell array at maximum power point is designed and experimented with a laboratory prototype.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.103-108
• /
• 1998

This paper deals with stand-alone Photovoltaic system(SPVS) with charge and discharge controller. Main power source of SPVS are generally solar cell and battery. Therefore SPVS can be classified into variable types in accordance with connection type between battery and solar cell. Mainly used one of them is direct connection type which has advantages such as simple structure and simple controller. However most big drawback of this system is energy loss by voltage disharmony between solar cell and battery. Therefore SPVS with charge and discharge controller which can operate solar cell at maximum power point is designed and analyzed by simulation in this paper.