• 제목/요약/키워드: SOCKET

검색결과 710건 처리시간 0.027초

스프링클러설비용 CPVC관과 신축배관 접속부분에서의 누수저감 대책에 관한 연구 (Leakage-reduction Measures at a Joint between CPVC Piping for a Sprinkler System and a Pipe Expansion)

  • 임춘기;임윤택;백은선
    • 한국화재소방학회논문지
    • /
    • 제29권3호
    • /
    • pp.21-30
    • /
    • 2015
  • 본 연구는 스프링클러설비용 CPVC관과 신축배관 접속부분에서의 누수저감을 위하여 신축배관을 연결하기 위한 밸브소켓과 신축배관 너트부분에 삽입되는 수밀 고무패킹 재질에 대한 국내 및 국외 관련 규격의 검토와 관련 시험 등을 통해 대책을 제안하고자 한다. 누수시험을 통해 밸브소켓 재질은 신축배관 너트부분이 금속제인 경우 금속제로 사용하거나 신축배관 너트부분의 재질을 합성수지제로 사용하여야함을 알 수 있었다. 또한 밸브소켓의 적정 품질 확보를 위해서는 나사산 규격과 검사기준으로 KS B 0221(관용평행나사)와 나사산 검사규격을 KS B 5223(관용 평행나사 게이지)에 따르도록 관련 기준을 개정할 필요가 있다. 그리고 신축배관 너트부분에 설치되는 수밀용 고무링 소재에 대해 세부적인 기준이 없어 NBR과 EPDM 소재가 함께 사용되고 있으나 수밀성이 우수한 EPDM 소재가 사용되도록 관련 기준을 개정할 필요가 있다.

표준 소켓 인터페이스에 대한 바이너리 호환성을 제공하는 TOE 지원 모듈의 설계 및 구현 (Design and Implementation of TOE Module Supporting Binary Compatibility for Standard Socket Interfaces)

  • 강동재;김재열;김강호;정성인
    • 한국멀티미디어학회논문지
    • /
    • 제8권11호
    • /
    • pp.1483-1495
    • /
    • 2005
  • 멀티미디어 데이터를 위한 스트리밍 기술이나 차세대 기술로서 고려되는 유비쿼터스 관련 기술들의 급격한 발달로 네트워크를 사용하는 대용량 데이터 서버들이 증가하는 추세이다. 대용량 데이터의 전송에 있어서 TCP/IP 프로토콜의 처리는 CPU에 많은 부하를 야기시키며 이를 해결하기 위한 방안의 하나로 TOE 디바이스를 적용하고 있다. 하지만 기존의 TOE 지원 모듈의 경우, 해당 TOE 디바이스에 의존적인 인터페이스의 지원으로 인하여 기존의 네트워크 어플리케이션이 TOE의 잇점을 얻기 위해서는 해당 TOE 디바이스가 제공하는 인터페이스를 사용하여 기존 프로그램을 수정하거나 재 컴파일하는 과정을 수행해야 한다는 단점을 갖는다. 본 논문에서는 상기 문제점을 해결하기 위하여 표준 소켓 인터페이스에 대한 바이너리 호환성을 제공하는 TOE 지원 모듈의 설계 및 구현을 제안한다. 본 논문에서 제안하는 TOE로 지원 모듈은 리눅스의 네트워크 프로토콜 레이어에 구현되며 기존의 네트워크 어플리케이션이 수정없이 TOE 디바이스의 잇점을 사용할 수 있도록 하고 일반 NIC과 TOE 디바이스의 동시 사용을 지원한다.

  • PDF

유한 요소 해석을 통해 계산된 틸팅 패드 베어링의 피봇 강성과 Hertzian 접촉 모델 해석 결과 비교 (Finite Element Analysis of Pivot Stiffness for Tilting Pad Bearings and Comparison to Hertzian Contact Model Calculations)

  • 이태원;김태호
    • Tribology and Lubricants
    • /
    • 제30권4호
    • /
    • pp.205-211
    • /
    • 2014
  • Recent studies emphasize the importance of pivot stiffness in the analysis of tilting pad bearings (TPBs). The present paper develops a finite element model of the pad pivot and compares the predicted pivot stiffness to the results of Hertzian contact model calculations. Specifically, a finite element analysis generates tetrahedral mesh models with ~40,000 nodes for a ball-socket pivot and ~50,000 nodes for a rocker-back pivot. These models assume a frictionless boundary condition in the contact area. Increasing the applied loads on the pad in conjunction with increasing time steps ensures rapid convergence during the nonlinear numerical analysis. Predictions are performed using the developed finite element model for increasing the differential diameters between the pad pivot (or ball) and the bearing housing (or socket). The predictions show that the pivot contact area increases with decreasing differential diameters and increasing applied loads. Further, the maximum deformation occurring at the pivot center increases with increasing differential diameters and increasing applied loads. The pivot stiffness increases nonlinearly with decreasing differential diameters and increasing applied loads. Comparisons of results of the developed finite element model to those of Hertzian contact model calculations assuming a small contact area show that the latter model underestimates the pivot stiffnesses predicted by the finite element models of the ball-socket and rocker-back pivots, particularly for small differential diameters. This result implies the need for cautionduring the design of pivot stiffness by the Hertzian contact model.

Alveolar socket preservation with demineralised bovine bone mineral and a collagen matrix

  • Maiorana, Carlo;Poli, Pier Paolo;Deflorian, Matteo;Testori, Tiziano;Mandelli, Federico;Nagursky, Heiner;Vinci, Raffaele
    • Journal of Periodontal and Implant Science
    • /
    • 제47권4호
    • /
    • pp.194-210
    • /
    • 2017
  • Purpose: The aim of the present study was to evaluate the healing of post-extraction sockets following alveolar ridge preservation clinically, radiologically, and histologically. Methods: Overall, 7 extraction sockets in 7 patients were grafted with demineralised bovine bone mineral and covered with a porcine-derived non-crosslinked collagen matrix (CM). Soft tissue healing was clinically evaluated on the basis of a specific healing index. Horizontal and vertical ridge dimensional changes were assessed clinically and radiographically at baseline and 6 months after implant placement. For histological and histomorphometric analysis, bone biopsies were harvested from the augmented sites during implant surgery 6 months after the socket preservation procedure. Results: Clinically, healing proceeded uneventfully in all the sockets. A trend towards reduced horizontal and vertical socket dimensions was observed from baseline to the final examination. The mean width and height of resorption were 1.21 mm (P=0.005) and 0.46 mm (P=0.004), respectively. Histologically, residual xenograft particles ($31.97%{\pm}3.52%$) were surrounded by either newly formed bone ($16.02%{\pm}7.06%$) or connective tissue ($50.67%{\pm}8.42%$) without fibrous encapsulation. The CM underwent a physiological substitution process in favour of well-vascularised collagen-rich connective tissue. Conclusions: Socket preservation using demineralised bovine bone mineral in combination with CM provided stable dimensional changes of the alveolar ridge associated with good reepithelialisation of the soft tissues during a 6-month healing period.

덱사매타존이 백서 발치와의 치유과정에서 미치는 영향 (The Effects of Dexamethasone on Healing of Tooth Extraction Socket of the Rat)

  • 정갑훈;이재목;서조영
    • Journal of Periodontal and Implant Science
    • /
    • 제26권4호
    • /
    • pp.823-840
    • /
    • 1996
  • The purpose of this study was to evaluate the effect of dexamethasone on the healing aspect of gingiva and alveolar bone after extraction. Extracted socket of 24 Sprague-Dawley rat was used. To extract easily and minimize injury, ${\beta}-APN$ 0.2g/kg/day soluted in mineral water was administrated for 5 days before extraction in both group. Ampicillin 1.5ml/kg i.m.,q.d, was administered for preventing infection after teeth extraction in both group, and dexamethasone 0.2mg/kg/day was injected for 3 days in experimental group.3 rats on each day was sacrificed on 1, 3, 7, 15 days after extraction. Histologic examination and the activity of osteoclasts by tartrate resistant acid phosphatase was observed. The results were as follows : 1. The Overall healing pattern was similar with both the experimental and control group, but in experimental group osseous healing was delayed. 2. The activity of osteoclasts was increased to day 3 and then decreased after day 3 in the experimental group. In comparison to the control group, the experimental group showed increased appearance to day 7 and then decreased appearance following day. 3. Regarding to the change of osseous tissue, the activity of osteoblasts was shown at day 7,but osteoclastic activity of the experimental group was less than that of the control group. The osteoclastic activity was statistically significant between two groups except day 7(p<0.05, p<0.01). In conclusion, the effects of dexamethasone for healing of extraction socket were considered as limiting the activity of osteoclasts, and the healing of extraction socket was delayed.

  • PDF

자가치아 뼈 이식재의 발치와내 이식 후 골 치유 양상에 관한 연구 (Study of bone healing pattern in extraction socket after application of demineralized dentin matrix material)

  • 정재호;이재훈
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제37권5호
    • /
    • pp.365-374
    • /
    • 2011
  • Introduction: Research on dental bone graft material has been actively conducted. Recently, demineralized dentin matrix material has been developed and introduced. This study examined the effect of demineralized dentin matrix material on bone healing. Subjects and Methods: The patients who received no treatment after extraction were used as the control group and patients who underwent demineralized dentin matrix material application in the extraction socket after extraction were used as the experimental group. Panorama radiography was performed at the baseline and at 3.5 months after graft material placement and CT was taken at 3.5 months after graft material placement for a radiologic evaluation. Bony tissue specimens were collected from the alveolar crest in the middle of the extraction socket using a 2 mm trephine bur after 3.5 months for the histology and hostomorphometric study. Results: 1. On the panoramic view, a higher bone density was observed in the subject group. 2. On the panoramic view, the bone density increased significantly in the extraction socket, from the baseline to 3.5 months: a 7 and 10 gray-level scale was observed in the control and experimental group, respectively (P<0.05). 3. The CT view evaluation at 3.5 months revealed significantly higher bone density in the subject group than the control group (P<0.05). 4. The histological findings showed more active new bone and lamellar bone formation in the subject group. Dentin with osteoinduction ability and enamel with osteoconduction ability appeared. 5. On histomorphometric analysis, the subject group showed significantly more new bone, lamellar bone area and lower soft tissue area (P<0.05). The difference between the groups was significant (P<0.05). Conclusion: Bone healing was improved after the application of demineralized dentin matrix material and there was active new bone and lamellar bone formation.

방사선조사가 당뇨 백서의 발치와 치유에 미치는 영향 (Effect of irradiation on the healing of extraction sockets in diabetic rats)

  • 김일중;황의환;이상래
    • Imaging Science in Dentistry
    • /
    • 제33권1호
    • /
    • pp.5-14
    • /
    • 2003
  • Purpose: To observe the histologic pattern of healing in molar tooth extraction sockets of streptozotocin-induced diabetic rats following irradiation. Materials and Methods: Mature Sprague-Dawley rats were divided into three groups: control, diabetic, and diabetic-irradiated groups. Diabetes mellitus was induced by injecting streptozotocin. Control rats were injected with a citrate buffer only. After 5 days, the right maxillary first molar was extracted under general anesthesia from each of the rats. After the extraction, rats in the diabetic-irradiated group were irradiated with a single absorbed dose of 10 Gy to the head and neck region. The rats were killed at 1, 3, 7, 14, 21, and 28 days after treatment. Tissue sections were stained with hematoxylin-eosin and Masson's trichrome. Results: In the diabetic and diabetic-irradiated groups, the early healing process of the socket extraction was similar to the control group, but bone formation was delayed at 7 days after the treatment. In the diabetic-irradiated group, alveolar bone surrounding the extraction socket showed signs of necrosis at 3 days after treatment, and hemorrhage was observed in connective tissue within the extraction socket at 14 days after treatment. Conclusion: This experiment revealed that the healing process of the extraction socket was severely delayed and retarded by irradiation in the diabetic state.

  • PDF

황금(Scutellaria Radix)의 에타놀 추출물이 백서 치조골 형성에 미치는 영향 (Effects of Ethanolic Extracts of Scutellaria Radix on the alveolar bone formation in the extract socket of rat)

  • 박준봉;허익;권영혁;배기환;정종평
    • Journal of Periodontal and Implant Science
    • /
    • 제27권3호
    • /
    • pp.443-457
    • /
    • 1997
  • The purpose of this study was to evaluate the effects of ethanolic extracts of Scutellaria Radix on the alveolar bone formation in the extract socket of rat. Thirty-six Sprague-dawley rats were used in this study. Mean body weight of rat was $130{\pm}5g$. Experimental animal were administered 0.4% ,${\beta}-aminopropionitril$(Sigma, USA) with the solid commercial food for 5 days. All the maxillary 1st molar of the rats were extracted by using of the tissue forcep under the general anesthesia with Pentobarbital sodium(Tokyo Chemical Co, Japan) injection into intraperitoneal space. All the extracted rats were divided into two group, experimental group which were feeded the solid food mixed ethanolic extracts of Scutellaria Radix, and control group which were feeded same food without reagent. At 1, 3, 5, 7, 9 and 14th days after tooth extraction, rats in both groups were serially sacrificed respectively. All the specimen were treated as usual method and prepared Hematoxylin-eosin stain for the light microscopic observation. The results were as follows : 1. Bone formation of extracted socket starts from the area on remained periodontal ligament than other area. 2. In the case of administration of the extracted Scutellaria Radix showed rapid healing process of connective tissue than non-administrated group. 3. In the case of administration of the extracted Scutellaria Radixshowed rapid osteogenesis than non-administrated With above results, it was concluded that ethanolic extracts of Scutellaria Radix may play a favorable role on the healing process of exatraction socket after extraction in rats. It was suggested that further study to evaluate the different concentration and administration method of ethanolic extracts of the Scutellaria Radix into same experimental model.

  • PDF

발치와의 혈소판 농축 혈장과 골 이식술 시행시 골 형성에 대한 임상 및 조직병리학적 연구 (Clinical and Histopathological Study Using Platelet Rich Plasma and Bone Grafts in Extraction Sockets)

  • 전영태;정진형;이종헌;임성빈
    • Journal of Periodontal and Implant Science
    • /
    • 제31권2호
    • /
    • pp.437-449
    • /
    • 2001
  • The socket preservation procedure was a simple and effective technique, and has better prognosis for implantation. The socket preservation usually used barrier membrane in combination with/without alloplastic bone materials. A recently study had shown that a regenerative therapy to tooth extraction utilizing growth factors made better results. Platelet-rich plasma was clinically easy method that acquired the growth factors, and is known that accelerated new bone formation and mineralization of bone graft materials. The purpose of this study was to evaluate clinical and histopathologic results which occur following socket preservations using platelet-rich plasma and bovine bone powder. Twelve patients who required extraction of one or more teeth for implantation at the department of periodontics in Dankook University Dental Hospital were selected. Extraction sockets were treated by using platelet-rich plasma and bovine bone powder. 3 months later, we observed clinical and histopathological results as follows: 1. Internal vertical measurement was an average of 7.33mm preoperatively and statistically significantly decreased to an average of 1.42mm postoperatively(p<0.05). 2. External vertical measurement was an average of 3.33mm preoperatively and decreased to an average of 2.75mm postoperatively; therefore there was no significant difference. 3. Horizontal measurement was an average of 7.75mm preoperatively and statistically decreased to an average of 6.08mm postoperatively(p<0.05). 4. Osteocyte-like cells and new bone formation connected with bovine bone grafts were observed in histopathologic examination. This study implied that platelet-rich plasma and bovine bone powder grafts were effective treatment for socket preservation and regeneration of severe bony defect made by implantation failure.

  • PDF

음향방출법을 이용한 굽힘피로 손상된 소켓용접배관의 진단 및 감시 (Diagnosis and Monitoring of Socket Welded Pipe Damaged by Bending Fatigue Using Acoustic Emission Technique)

  • 김정석;오세웅;박익근
    • 비파괴검사학회지
    • /
    • 제28권4호
    • /
    • pp.323-330
    • /
    • 2008
  • 소구경 배관 소켓 용접부의 고주기 피로특성윽 평가하고 피로 균열의 발생을 음향방출법을 이용하여 실시간 모니터링 하였다. 스테인리스 316L강 시험편은 가스텅스텐아크용접 공정으로 루트부에 결함이 없는 시험편과 용입불량 결함이 있는 시험편으로 준비하였다. 피로파단은 고응력 일때는 토우부, 상대적으로 저응력일 때는 루트부에서 일어났다. 피로시험동안 음향방출 카운트가 급격히 증가하는 시점을 균열의 발생 싸이클 ($N_i$)로 정의하였고 방사선투과법과 전자현미경을 이용하여 피로균열 생성 싸이클 전과 후에서 균열을 확인하였다. 소켓용접배관의 굽힘피로 손상 진단 및 감시를 위해 균열의 존재와 파괴모드 그리고 균열의 발생 싸이클에 관한 연구를 수행하였다.